NEC Visualink 128/384 User Guide

NDA-24230 Issue 2.0Page 8-1
VisuaLink 128/384 User Guide Chapter 8
Chapter 8  Operation Method
This chapter explains how to perform basic remote control functions of the 
VisuaLink 128 or VisuaLink 384, such as switching monitor screens, and 
controlling cameras.  Your system is ON
 if the light near the power display on the 
front of the VisuaLink unit is lit.
If the VisuaLink is not ON
, press the POWER SWITCH
 on the front of the 
VisuaLink unit.
8.1 System Status 
The STATUS
 button on the hand held...

Page 8-2NDA-24230 Issue 2.0
Chapter 8 VisuaLink 124/384 User Guide
The following defines the status message:
¬
Picture Source
This displays the picture source (transmission/reception/still-picture) 
currently displayed.  It displays the remote location name when displaying a 
received picture.
Á
Type of camera control
Displays the current camera control (local or remote).
Â
Camera display
Displays the camera that was last selected for control (Camera 1 or Camera 
2).
Ã
Time display
Displays the local...

NDA-24230 Issue 2.0Page 8-3
VisuaLink 128/384 User Guide Chapter 8
8.2 Volume Control
If the volume from the far-end is either too faint or too loud, you can adjust it with 
the VOLUME
 buttons on the hand held remote.
8.2.1  Increase the volume
¬
Press the VOLUME
 UP
 button.
The volume bar appears on the monitor to show you the volume level.  We 
recommend that you do not use the volume control on your monitor to adjust the 
volume because this may interfere with your ability to adjust the volume with...

Page 8-4NDA-24230 Issue 2.0
Chapter 8 VisuaLink 124/384 User Guide
8.3 Muting Your 
MicrophoneIf you want to speak privately to someone at your site during your 
videoconference, you can mute your microphone.
8.3.1  Mute your microphone
¬
Press MUTE
 button.
MUTE
 is displayed on the screen.  The remote cannot hear your voice.
Note:MUTE
 is displayed when the local microphone is muted.  The MUTE
 logo 
will blink ON/OFF.
8.3.2  Unmute your microphone
¬
Press MUTE
 button.
MUTE
 message is deleted from...

NDA-24230 Issue 2.0Page 8-5
VisuaLink 128/384 User Guide Chapter 8
8.4 Switching Monitor 
ScreensDuring a Video conference, you may want to see a preview of local site to 
transmit or a still-picture in addition to seeing pictures sent from the remote.  Use 
the Monitor Switching Feature.  The user is able to switch the picture at the local 
site.
8.4.1  Preview the Local image
Previewing simply means looking at the image from your main camera or your 
document camera so that you can make any adjustments...

Page 8-6NDA-24230 Issue 2.0
Chapter 8 VisuaLink 124/384 User Guide
8.4.2  Display a received picture
¬
Press the RECEIVE
 button.
8.4.3  Recall a snapshot
Recall a snapshot simply means looking at the last snapshot that you sent or 
receive.
¬
Press the VIEW
 button.
The snapshot appears on your screen again, but the people at far-end do not see it 
unless they recall it themselves.
RECEIVE
Irving
Local control: Camera 1
VIEW
STILL 

NDA-24230 Issue 2.0Page 8-7
VisuaLink 128/384 User Guide Chapter 8
8.5 Switching Camera 
PicturesWith your system, you can send video to the far-end from your MAIN CAM
 or 
CAM
 2.
8.5.1  Local switching
Switching the video image sent to the remote site.
¬
Press the MAIN CAM
 button.
A picture of Camera 1 is sent to the remote.
Note:
Image as seen by the remote-end.
8.5.2  Transmit Camera 2 
picture
¬
Press CAM 2
 button.
A picture from Camera 2 is sent to the remote.
Note:
Image as seen by the...

Page 8-8NDA-24230 Revision 1.0
Chapter 8 VisuaLink 128/384 User Guide
8.5.3  Remote switching
To switch the transmitted picture sent from the remote site:
¬
Press the FAR END
 button.
.
The system switches control from local to remote control.  This is indicated by the 
local message.
Note:
Image as seen by the local site.
Á
Press the MAIN CAM 
or CAM 2
 button.
The far site sends the camera selected.
Â
When CAM 2
 button is pressed:
Note:
Image as seen by the local site.
FAR END
Irving
Remote control:...

NDA-24230 Issue 2.0Page 8-9
VisuaLink 128/384 User Guide Chapter 8
8.5.4  Switch back to local control
¬
Press the NEAR END
 button.
A control switches back to the local.
Note:
Image as seen by the local site.
NEAR END
Irving
Local control:  Camera 1 

Page 8-10NDA-24230 Revision 1.0
Chapter 8 VisuaLink 128/384 User Guide
8.6  PIP Functions
The little window that appears on your screen is called the Picture-in-Picture (PIP) 
window.  You can make this window appear or disappear anytime.
8.6.1  Display the PIP
¬
Press the PIP 
button.
PIP is displayed.
Note 1:
PIP displays the transmitting image.  The image shown on the monitor 
could be a mirror or non-mirror image.  This depends on the PIP menu 
setting.
Note 2:
Please refer to Section
 7.2...