NEC Visualink 128/384 User Guide

							NDA-24230 Issue 2.0Page 6-11
VisuaLink 128/384 User Guide Chapter 6
6.2.2  Place Speed Dial Calls
To dial a call from the dialing directory.
¬
Press the CALL
 button.
Á
Move the cursor to the site you want to call using CAMERA CONTROL
 
button.  Press the ENTER
 button.
Place Manual Dial Call
Place Redial Call
001.
002.
003.
004.
005.
Press ENTER after choosings
CALL
Place Manual Dial Call
Place Redial Call
001. Irving
002.
003.
004.
005.
Press ENTER after choosing
s
CAMERA
CONTROL
ENTER 
						

							Page 6-12NDA-24230 Issue 2.0
Chapter 6 VisuaLink 128/384 User Guide
Â
The following series of screens will appear on the monitor as the VisuaLink is 
placing the call.
Once the line has been connected, the screen will automatically display the remote 
site.
After the lines connect a picture from the far-site appears.
Calling Remote Site.  Please wait…
Phone Number 1
  
[ 9725185000  ]
Phone Number  2
  [ 9725185001                        ]
REC
s
ENTER
CALL
Receiving Video 
       from Remote Site
Connected Line Speed:  128kb/s
Speed is 
in yellow 
						

							NDA-24230 Issue 2.0Page 6-13
VisuaLink 128/384 User Guide Chapter 6
6.2.3  Redialing a Call
Sometimes when you place a video call, the call may not go through the first time.  
If this happens, you may want to redial the call.  Just as with the redial feature on 
your telephone, the redial feature on your VisuaLink lets you automatically call 
the last 30 numbers that you have called or have received.
¬
Press the CALL
 button.
The Dial Directory screen appears.
Á
Using the CAMERA CONTROL 
button, move the cursor down to the 
PLACE REDIAL CALL
 and press the ENTER
 button.
Place Manual Dial Call
Place Redial Call
001. Irving
002.
003.
004.
005.
Press ENTER after choosings
CALL
Place Manual Dial Call
Place Redial Call
001. Irving
002.
003.
004.
005.
Press ENTER after choosings
CAMERA
CONTROL
ENTER 
						

							Page 6-14NDA-24230 Issue 2.0
Chapter 6 VisuaLink 128/384 User Guide
Â
Select the number that you would like to redial from the menu.  Use the 
CAMERA CONTROL
 button to scroll up or down through the 30 numbers.  
Press the ENTER
 button to make the call.
Note 1:
The redial bin stores the last 30 numbers dialed or received.  The message 
to the right of the number indicates whether the call was incoming or 
called.
Note 2:
All redial numbers are stored as phone numbers.
Note 3:
The redial number are stored in consecutive order.
Select Number to Redial
001. 7190409**71904 Calling
002. 9727190409 Incoming
003. 17007307878 Calling
004. 17007346464 Calling
005. 7190411**71904 Calling
Press ENTER after choosing
Press CANCEL to go to Call Screen
s
CAMERA
CONTROL
ENTER 
						

							NDA-24230 Issue 2.0Page 6-15
VisuaLink 128/384 User Guide Chapter 6
Ã
The following series of screens will appear on the monitor as the VisuaLink is 
placing the call.
Once the line has been connected, the screen will automatically display the remote 
site.
After the lines connect a picture from the far-site appears.
Calling Remote Site.  Please wait…
Phone Number 1
[7190409   ]
Phone Number 2
[7190410  ]
REC
ENTER
CALL
Receiving Video 
      from Remote Site
Connected Line Speed:  128kb/s
Speed is 
in yellow 
						

							Page 6-16NDA-24230 Issue 2.0
Chapter 6 VisuaLink 128/384 User Guide
6.3 End a Call
Press the HANGUP
 button on the remote controller to display the menu for 
disconnecting the remote end.
¬
Press the ENTER
 button to end the video call.  Press the CANCEL
 button to 
continue the video call.
Note 1:
If the line cannot be disconnected from the remote controller, turn off the 
power switch.  This will force the VisuaLink to hang up the video call.
Note 2:
If the far-end hangs up first, you will see the message FAR-END HUNG 
UP
 on your screen.
Disconnecting, OK?
Yes: ENTER  
No: CANCELHANGUP
ENTER
CANCEL
Please wait…Disconnecting 
						

							NDA-24230 Issue 2.0Page 6-17
VisuaLink 128/384 User Guide Chapter 6
6.4 Answer a Call
The VisuaLink is able to be set to automatic answer mode or manual answer.  If 
the VisuaLink set to an automatic answer all incoming calls will be answered by 
the VisuaLink without user intervention.When you receive a video call and your 
system is set for manual answer, your system rings just like a telephone, and you 
see a message like this on your screen:  
INCOMING CALL, PRESS ENTER TO ANSWER.
¬
To answer the call:
Press the ENTER
 button.  The following sequence will appear.
Á
The following screen appears when an incoming call is received.
Incoming call........
Remote Address: Irving HQ
9721234567
Accept call?
Yes: 
ENTER  No: CANCEL
Please select a key.
ENTER
Accepting incoming call........
Remote Address: Irving HQ
9721234567
 
Please wait. 
						

							Page 6-18NDA-24230 Issue 2.0
Chapter 6 VisuaLink 128/384 User Guide
Â
Press CANCEL
 button if rejecting an incoming call.Receiving Video from Remote Site
Connected Line Speed:  128kb/s
 
Speed is 
in yellow
Rejected incoming call........
Remote Address: Irving HQ
9722345678
 
CANCEL 
						

							NDA-24230 Issue 2.0Page 7-1
VisuaLink 128/384 User Guide Chapter 7
Chapter 7  Conference Mode
This chapter gives an in-depth description of the on-screen menus.
7.1 How to Display the 
Conference Mode 
On-Screen IconsThis menu will display line speed, audio mode, video format and data settings for 
the local site and conference mode.
¬
Press MENU
 button to display the on-screen icons.
s
Setting the PIP parameter.MENU
Icon Description
Menu screen for setting PIP position to 
be displayed on the screen.
Menu that lets you store the camera 
position.
Menu that lets you store a remote sites 
telephone number.
Menu that lets you view the conference 
settings.
Menu that allows the user to set the 
default condition of the VisuaLink.
Activates audio training in order to 
condition the room for audio. 
						

							Page 7-2NDA-24230 Issue 2.0
Chapter 7 VisuaLink 128/384 User Guide
Á
Move the cursor s
 with CAMERA CONTROL
 button to the conference 
control icon and press ENTER
 button.  Conference Control Menu is 
displayed.
Local screen setting with no connection.
s
Display conference information.
ENTER
CAMERA
CONTROL
Status :  No Connection

Speed :  128Kb/s
Video Format :  FCIF
Audio mode :  SB-ADPCM
MLP speed :  4.0Kb/s
LSD speed :  1.2Kb/s
Indicates what type of connection, possible 
messages are:
Point-to-Point (Two (2) sites)
Multipoint (Three (3 or more sites)
No Connection
Indicates the parameter settings 
for the local VisuaLink or the 
negotiated parameter settings.  
The possible messages are:
Setting (local)
Common (negotiated)
The VisuaLink stored 
parameters.