NEC Visualink 128/384 User Guide

							NDA-24230 Issue 2.0Page 5-13
VisuaLink 128/384 User Guide Chapter 5
5.5 Communication 
SettingThis icon sets the video speed, network type, and answer mode.
To set communication:
¬
Select communication setting icon in the environment setting menu.
Á
Press ENTER
 button.
ENTER
s
Network Parameter Setting.
CAMERA
NUMBER CONTROL 
						

							Page 5-14NDA-24230 Issue 2.0
Chapter 5 VisuaLink 128/384 User Guide
The setting screen is displayed.  The current setting is displayed.
Note 1:
To select an item use the up and down portion of the CAMERA 
CONTROL 
button.
Note 2:
To change a setting use the left and right portion of the CAMERA 
CONTROL
 button to toggle through the item.
Â
Press ENTER
 button to define it after changing a setting.
Ã
Press the MENU
 or CANCEL
 button three (3) times to proceed back to the 
video image.
Speed : <  128Kb/s  >
Incoming mode : <  Select >
Number of rings : 
Restricted dial No. : [2222]
Call restriction : <   No limit   >
Register speed dial : <    Allowed   >
Press ENTER after choosing.
Speed: Sets the default transmission rate.  What ever rate is set, 
this is the rate shown in the dialing screen.
Incoming mode: Sets the incoming call mode.  Posible settings are:  
Auto - automatically answers the call.
Manual - the user must answer the call with the remote.
Select - Only answers calls that are stored in the speed 
dial.
Number of rings: The number of rings required before the system answers 
the call.
Restricted dial No.: Allows the user to set caller restriction number.
Call restriction: Allows the user to set a call restriction.  Possible settings 
are:
No limit - the user can place calls with no restrictions.
Speed dial only - the user can only place calls that are 
stored in the speed dial register.
Manual dial inhibited - the user cannot place manual 
calls.
Register speed dial: Allows the user to set access level for speed dial 
registrations.  Possible settings are:
Allowed - allows the user the access to set speed dial.
Disabled - the user is not allowed to access the speed dial 
registration.
s 
						

							NDA-24230 Issue 2.0Page 5-15
VisuaLink 128/384 User Guide Chapter 5
5.6 Local Setting
This icon sets the site name, my number, password, and SPIDs.
5.6.1  Display the LOCAL SETTING
 screen
¬
Select LOCAL SETTING
 icon in the ENVIRONMENT SETTING
 menu.
Á
Press ENTER
 button.
The setting screen (location and others) is displayed.  The current setting is 
displayed.
Note 1:
To select an item use the top and bottom portion of the CAMERA 
CONTROL 
button.
Note 2:
To enter a number use the NUMBER
 buttons on the handheld remote.
Note 3:
After entering the site tepehone numbers, move cursor to NEXT
 and 
press the ENTER 
button.  If you are setting up a VisuaLink 128, go to 
Step 4. 
ENTER
s
Local Site Setting.
CAMERA
CONTROL 
						

							Page 5-16NDA-24230 Issue 2.0
Chapter 5 VisuaLink 128/384 User Guide
Step 1.  VL 128/384
Move the cursor to the NEXT SCREEN
 using the top or bottom portion of the 
CAMERA CONTROL
 button.
Note:
If you are setting up a VisuaLink 128, go to Step 4. 
Step 1 -Enter Video Number and SPID for Line 1
My Number1
   [9727190320_ ]
SPID1
   [97271903200101_ ]
My Number2
   [972719032_ ]
SPID2
   [ ]
Next screen
Prior screen
Press ENTER after choosing each item.
sCAMERA
CONTROL
NUMBERS
Step 1 -Enter Video Number and SPID for Line 1
My Number1
   [9727190320_ ]
SPID1
   [97271903200101_ ]
My Number2
   [972719032_ ]
SPID2
   [9727190321010_ ]
Next screen
Prior screen
Press ENTER after choosing each item.
s 
						

							NDA-24230 Issue 2.0Page 5-17
VisuaLink 128/384 User Guide Chapter 5
Step 2.  VL 384
Move the cursor to the NEXT SCREEN
 using the top or bottom portion of the 
CAMERA CONTROL
 button.
Step 2 - Enter Video Number and SPID for Line 2
My Number1
   [9727190322_ ]
SPID1
   [97271903220101_ ]
My Number2
   [9727190323_ ]
SPID2
   [ ]
Next screen
Prior screen
Press ENTER after choosing each item.
sCAMERA
CONTROL
NUMBERS
Step 2 - Enter Video Number and SPID for Line 2
My Number1
   [9727190322_ ]
SPID1
   [97271903220101_ ]
My Number2
   [9727190323_ ]
SPID2
   [97271903230101_ ]
Next screen
Prior screen
Press ENTER after choosing each item.
s 
						

							Page 5-18NDA-24230 Issue 2.0
Chapter 5 VisuaLink 128/384 User Guide
Step 3.  VL 384
Move the cursor to the NEXT SCREEN
 using the top or bottom portion of the 
CAMERA CONTROL
 button.
Step 3 - Enter Video Number and SPID for Line 3
My Number1
   [9727190324_ ]
SPID1
   [97271903240101_ ]
My Number2
   [9727190324_ ]
SPID2
   [ ]
Next screen
Prior screen
Press ENTER after choosing each item.
sCAMERA
CONTROL
NUMBERS
Step 3 - Enter Video Number and SPID for Line 3
My Number1
   [9727190324_ ]
SPID1
   [97271903240101_ ]
My Number2
   [9727190324_ ]
SPID2
   [97271903240101_ ]
Next screen
Prior screen
Press ENTER after choosing each item.
s 
						

							NDA-24230 Issue 2.0Page 5-19
VisuaLink 128/384 User Guide Chapter 5
Step 4.  VL 128/384
 
 To set the site name, press the ENTER
 button.
Step 5.  VL 128/384
Note:
Move the cursor to the character you want to input using the left and right 
sides of the CAMERA CONTROL
 button and press the ENTER
 button.  
If incorrectly entered, delete the letter with the CANCEL
 button.
             Step 1 - Optional User Settings
   Your Site name  
      [Irving ]
Password [1234]
Time setting
[12/1/1998 12 : 07]
Time display: 
Auto Power Save: 
Next screen
Prior screen
Press ENTER after choosing each item.
s
CAMERA
CONTROL
NUMBERS
This is Remote Name Registration.  Using the 
cursor to hihlight and Press ENTER to select.
Site name: [IRVING_]
  !  # % & ’  ( ) * + . / 0 1 2 3 4 5
6 7 8 9 : ; < = > ? @ A B C D E F G H I J K
L M N O P Q R S T U V W X Y Z [ ¥ ] ^ _ ‘ a
b c d e f g h i j k l m n o p q r s t u v w
x y z { | } ~
Complete
Cancel
CAMERA
CONTROL
CANCEL
ENTER 
						

							Page 5-20NDA-24230 Issue 2.0
Chapter 5 VisuaLink 128/384 User Guide
Ã
When complete, use the top and bottom portion of the CAMERA 
CONTROL 
button to select COMPLETE
 or CANCEL
.  You return to the 
optional information screen.
             Step 1 - Optional User Settings
   Your Site name  
      [Irving ]
Password [1234]
Time setting
[12/1/1998 12 : 07]
Time display: 
Auto Power Save: 
Next screen
Prior screen
Press ENTER after choosing each item.
s 
						

							NDA-24230 Issue 2.0Page 5-21
VisuaLink 128/384 User Guide Chapter 5
5.6.2  Change the password
¬
Select the password moving the cursor using the top and/or bottom portion of 
the CAMERA CONTROL
 button.
Á
Press the ENTER
 button to set password.
Â
Enter a 4-digit password with NUMBER
 button.
Note:
If no number is entered, the password protect will be deactivated.
              Step 1 - Optional User Settings
   Your Site name  
   [Irving ]
Password [1234]
Time setting
[12/1/1998 12 : 07]
Time display: 
Auto Power Save: 
Next screen
Prior screen
Press ENTER after choosing each item.
s
CAMERA
CONTROL
ENTER
Password [1234]
 
Input 4-digit password.
Delete digit: CANCEL/  Register digit: ENTER
ENTER
NUMBER 
						

							Page 5-22NDA-24230 Issue 2.0
Chapter 5 VisuaLink 128/384 User Guide
Ã
Register with the ENTER
 button after completing password.  You return to 
the optional user settings screen.
             Step 1 - Optional User Settings
   Your Site name  
   [Irving ]
Password [1234]
Time setting
[12/1/1998 12 : 07]
Time display: 
Auto Power Save: 
Next screen
Prior screen
Press ENTER after choosing each item.
s