NEC Ucd-Xl Installation Guide

NDA-30078   Revision 1.0Page 29
UCD-XL Installation Guide Installation
Miscellaneous Set 
Up1. At this point, the configurations of one or more UCD-XL components have 
been saved, but the terminals and ports have not yet been set up to work with 
UCD-XL.
The installation software issues the prompt
I_e ]ecd RU dXU E>9H CicdU] 1T]Y^YcdbQd_b b__d d_ cUd e`
dXU 1T]Y^YcdbQd_b dUb]Y^Q\ Q^T_b =39 `_bdc
9V i_e [^_g dXU b__d `Qccg_bT Q^T gYcX d_ S_^dY^eU U^dUb ´iµ+
_dXUbgYcU U^dUb ´^µ _b ´aµ d_ QR_bd dXU...

Installation UCD-XL Installation Guide
Page 30NDA-30078   Revision 1.0
This Page Left Blank. 

NDA-30078   Revision 1.0Page 31
UCD-XL Installation Guide Configuring UCD-XL
Chapter 3 Configuring UCD-XL
This chapter provides instructions for configuring UCD-XL. You can refer to the 
Applications Manager (APM) Operations Manual for more information about 
configuring the software.
Application Characteristics
UCD-XL is configured into the APM system using the Add function of the 
Application Configuration option on the APM System Administration menu.
Note:This chapter describes an alternate method for...

Page 32NDA-30078   Revision 1.0
Configuring UCD-XL UCD-XL Installation Guide
Parameter definitions:
OAI Application  Indicates whether or not (Yes or No) this com-
ponent communicates with the NEAX2400
using OAI processes.
CRT Application  Indicates whether or not (Yes or No) this com-
ponent runs on the same screen as the APM,
rendering the APM temporarily inaccessible.

Communication QueueIndicates whether or not (Yes or No) this non-
OAI component needs an IPC queue to com-
municate with other...

NDA-30078   Revision 1.0Page 33
UCD-XL Installation Guide Configuring UCD-XL
Initialization Batch Indicates whether or not (Yes or No) the compo-
nent is to be initialized automatically when the
OAI system is initialized.
Termination Mode Indicates how the APM is to notify the compo-
nent to terminate.
Standard Output Designates the file into which component output
is redirected.
Number of Restarts Indicates how many times the APM may restart
the component after it terminates erroneously.
Queue Key...

Page 34NDA-30078   Revision 1.0
Configuring UCD-XL UCD-XL Installation Guide
Table 3-4  Monitor Parameters
Parameter Entry Description
Database Name #1
/oai/db/cur/ucdgrpsFilename of the UCD-XL Group Identification 
Database.
Database Name #2 /oai/db/cur/ucdports Filename of the UCD-XL Port Assignment Database.
Timeout Value #1
30Default frequency of port inspection, in minutes. This 
may be overridden by the value given for a group in the 
Group Identification Database (see page 42). If the 
group’s...

NDA-30078   Revision 1.0Page 35
UCD-XL Installation Guide Configuring UCD-XL
Using the OAI-Conf command on the Application Configuration Entry screen, 
make the entry shown for each of the following parameters required by each 
Messenger component; each Messenger has the same values for its parameters. Use 
the instructions provided for this option in the APM Operations Manual.
Note:Italicized entries may be changed.
User-Defined Parameters
Make the entries shown for each of the following user-defined...

Page 36NDA-30078   Revision 1.0
Configuring UCD-XL UCD-XL Installation Guide
Monitor User-
defined 
ParametersMake the following entries on the OAI Configuration screen. Italicized entries can 
be changed.
Table 3-6  Monitor User-defined Parameters
User Defined Entry Definition
#1/oai/db/cur/ucdaniPathname of the ANI Pattern Database. This is required 
only if you desire the distribution of calls based upon 
their ANI data. Otherwise, leave this parameter blank.
#2 (blank) This parameter is no longer...

NDA-30078   Revision 1.0Page 37
UCD-XL Installation Guide Configuring UCD-XL
Messenger User-
defined 
ParametersMake the following entries on the OAI Configuration screen. Italicized entries can 
be changed. #10UCDXL_MediatorName assigned to the Mediator component. Must be as 
given in the Primary Configuration Parameters on page 
32.
#11A(ctual)Source for the mailbox number in a MCI message for a 
direct call to voice mail. Select one of the following 
entries:
A(ctual): The actual line of the call....

Page 38NDA-30078   Revision 1.0
Configuring UCD-XL UCD-XL Installation Guide
Mediator User-
defined 
ParametersMake the following entries on the APM Configuration Entry screen. Italicized 
entries can be changed.
Table 3-8  Mediator User-defined Parameters
User Defined Entry Definition
#1UCDXL_MediatorName assigned to the Mediator component. Must be as 
listed in the Primary Configuration Parameters on page 
32.
#2S(tandard)MCI message set to use. Select one of the following 
entries:
S(tandard):...