NEC Sentry Installation Guide

NDA-30080   Revision 1.0Page 51
Sentry Installation Guide Emergency Conference
The APM Administration main menu displays, as illustrated below:
2. Type i and press Enter to select the Installation of Applications/Packages 
option. 
The Installation of Application/Packages screen displays.
3. At the “
Enter Package to be installed” prompt, type applications and 
press Enter.
NEC America      APM Administration                Wed  Jan 31, 1996
APM Platform Release  Rel2.0  (Oct 09, 1995)
Main MenuAPMDebug...

Page 52NDA-30080   Revision 1.0
Emergency Conference Sentry Installation Guide
The “Enter Release Media Device” prompt displays.
4. Select the floppy disk device as the installation media by typing f and 
pressing Enter.
The following screen displays:
5. Insert the Emergency Conference diskette into the floppy disk device, and 
press Enter to continue.
The screen displays files in the application installation. Many files may 
scroll off the screen, until all of the files from the diskette have been...

NDA-30080   Revision 1.0Page 53
Sentry Installation Guide Emergency Conference
The “Has all release media been loaded” prompt displays, as 
illustrated below:
Has all release media been loaded [y or n] ? 
x oai/app/econf/install/blding_m.mdf, 210 bytes, 1 tape blocksx oai/app/econf/install/blding.adf, 94 bytes, 1 tape blocks
x oai/app/econf/install/Mconf.cfg, 161 bytes, 1 tape blocks
                                            .
                                            .
x oai/chksum_app, 721 bytes, 2...

Page 54NDA-30080   Revision 1.0
Emergency Conference Sentry Installation Guide
6. Type y and press Enter to indicate that all release media has been loaded.
The APM installation begins, processing all of the Emergency Conference 
installation files and checking them for correctness. The screen indicates the 
status of the installation. 
After the files have been processed, the “root password” prompt displays. In 
order to complete the Emergency Conference installation, you must modify 
certain files that...

NDA-30080   Revision 1.0Page 55
Sentry Installation Guide Emergency Conference
7. Type in the root password at the prompt and press Enter to continue the 
Emergency Conference installation.
The Emergency Conference installation creates any directories that do not 
already exist. The paths of the directories display on the screen, as illustrated 
below.
8. Press Enter.  The “
Override Conference Pilot Number” prompt displays:
Creating Emergency Conference directories . . .
/oai/app/sentry created
NEC...

Page 56NDA-30080   Revision 1.0
Emergency Conference Sentry Installation Guide
9. Type the number your site will use to override a busy destination, such as 
1000. This number can contain no more than 5 characters.
10. If you have entered the correct pilot number, type y and press Enter to verify 
your entry. Otherwise, type n and press Enter, and enter the correct value.
After you have entered and verified the pilot number, the “
Override Tone 
Phone Number
” prompt displays.
11. The Override Tone Phone...

NDA-30080   Revision 1.0Page 57
Sentry Installation Guide Emergency Conference
12. The default error destination specifies the extension number of the 
destination that receives transferred parties that could not be reconnected to 
the transferring party. Type the extension number to receive transferred 
parties when the line is busy, and press Enter. Type y and press Enter to 
verify this number.
.
13. If you want released contacts to be redialed if a caller joins an active 
conference, type y and press...

Page 58NDA-30080   Revision 1.0
Emergency Conference Sentry Installation Guide
14. If you want parties to be connected to a conference card set to be 
automatically released during initialization, type y and press Enter twice. 
Otherwise, type n and press Enter. Confirm your entry at the prompt.
The “Service Feature Class” prompt displays.
15. Do one of the following:
If you want to disable the flash hook feature while a station is connected to 
a conference, type y and press Enter.
If you do not want...

NDA-30080   Revision 1.0Page 59
Sentry Installation Guide Emergency Conference
17. The Emergency Conference Auto-Configuration program installs the default 
configuration. This screen displays whether or not you disabled the flash 
hook feature.
18. Press Enter to start the auto-configuration. The status of the configuration 
displays, as illustrated below:
The default Emergency Conference Application Configuration
NEC America Inc. Emergency Conference Installation Wed - Apr 29, 1998
Press Enter to...

Page 60NDA-30080   Revision 1.0
Emergency Conference Sentry Installation Guide
19. Press Enter to continue the installation process.
20. Press Enter to continue.
The following screen displays when the installation is complete.
21. Press Enter.
Installing the Emergency Conference Binary . . .
NEC America Inc. Emergency Conference Installation Wed - Apr 29, 1998
Installing the Conference Database Files . . .
Installing the Conference Card Database Files . . .
Installing the Tenant Database Files . . ....