NEC Sentry Installation Guide

NDA-30080   Revision 1.0Page 31
Sentry Installation Guide Annoyance Trap
Chapter 3 Annoyance Trap
This chapter describes the field entries to make during the installation and 
configuration of the Annoyance Trap software. 
Overview
The Annoyance Trap program is an OAI application that provides a method for 
tracking and identifying annoying callers. 
Any user can trigger the Annoyance Trap by placing the annoying party on hold 
and then dialing a designated number. The initiator is then reconnected to...

Page 32NDA-30080   Revision 1.0
Annoyance Trap Sentry Installation Guide
Software Installation
The Annoyance Trap software must first be loaded from the release media. 
Remember to use the Applications Manager (APM) Installation Manual if you 
need further instructions for installing software using the APM.
Note:You will be prompted for several values when you install the software. For more 
information about these and other parameters, refer to the next section, 
Configuration on page 40.
1. To begin...

NDA-30080   Revision 1.0Page 33
Sentry Installation Guide Annoyance Trap
2. Type i and press Enter to select the Installation of Applications/Packages 
option. 
The Installation of Application/Packages screen displays.
3. At the “
Enter Package to be installed” prompt, type applications and 
press Enter.  The “
Enter Release Media Device” prompt displays.
Installation of Applications/Packages
Available Packages are:
applications    asl    mtl     tcpip     update    x25
Enter Package to be installed:...

Page 34NDA-30080   Revision 1.0
Annoyance Trap Sentry Installation Guide
4. Select the floppy disk device as the installation media by typing f and pressing 
Enter.  The following screen displays:
5. Insert the Annoyance Trap diskette into the floppy disk device, and press Enter 
to continue.
The screen displays files in the application installation. Many files may scroll 
off the screen, until all of the files from the diskette have been processed. 
The “
Has all release media been loaded” prompt...

NDA-30080   Revision 1.0Page 35
Sentry Installation Guide Annoyance Trap
6. Type y and press Enter to indicate that all release media has been loaded.
The APM installation begins processing all of the Annoyance Trap 
installation files and checking them for correctness. The screen indicates the 
status of the installation. 
After the files have been processed, the “root password” prompt displays. In 
order to complete the Annoyance Trap installation, you must modify certain 
files that require “root”...

Page 36NDA-30080   Revision 1.0
Annoyance Trap Sentry Installation Guide
7. Type in the root password at the prompt and press Enter to continue the 
Annoyance Trap installation.
The Annoyance Trap installation will create any directory that does not 
already exist. The paths of the directories will display on the screen.
8. Press Enter to continue.  Next, you will be prompted to enter the “Annoyance 
Trap Pilot Number”.
9. Type the number your site will use to trigger Annoyance Trap, such as *69.  
This...

NDA-30080   Revision 1.0Page 37
Sentry Installation Guide Annoyance Trap
10. If you have entered the correct pilot number, type y and press Enter to verify 
your entry. Otherwise, type n and press Enter, and enter the correct value.
After you have entered and verified the pilot number, the “Annoyance Trap 
Operator’s Extension” prompt displays.
11. If your system requires an Annoyance Trap operator, type the operator’s 
extension at the prompt, such as 1000, and press Enter.  Then, verify that this...

Page 38NDA-30080   Revision 1.0
Annoyance Trap Sentry Installation Guide
12. Do one of the following:
If your system requires an Annoyance Trap audio device, type the device’s 
extension at the prompt, such as 1001, and press Enter.  Verify that this 
extension is correct at the next prompt, and go to step 13.
If your system does not require an Annoyance Trap audio device, press 
Enter without typing an extension. Press Enter to verify that you have not 
entered an extension, then go to step 14.
13....

NDA-30080   Revision 1.0Page 39
Sentry Installation Guide Annoyance Trap
16. Press Enter to continue the installation process.
17. Press Enter to continue and the following screen displays when the installation 
is complete.
18. Press Enter.
Installing the Annoyance Trap Binary . . .
NEC America Inc.   Annoyance Trap Installation   Wed - Apr 29, 1998
Installing the Tenant Database Files . . .Installing the Building Database Files . . .Installing the History Log Configuration Files. . .
Press Enter to...

Page 40NDA-30080   Revision 1.0
Annoyance Trap Sentry Installation Guide
Configuration
The Annoyance Trap software is configured automatically during installation if 
you answer “yes” to the autoconfig prompt. You may also configure Annoyance 
Trap manually by using the Add Function of the Application Configuration option 
on the APM System Administration menu.  The default application name is 
Annoyance_Trap.
Note:
This section contains information that is entered in the Annoyance Trap 
configuration...