NEC Second Party Alert User And Installation Guide

NDA-30041   Revision 5Page 15
Second Party Alert User and Installation Guide INSTALLATION AND CONFIGURATION
Step 4: 
Existing OAI Name Display Database Check
In this step, the system determines if an OAI Name Display Database is installed 
on the system:
-  If the Name Display Database is not installed, the MSF Op-code screen is 
displayed as described in “Step 5: Specify the MSF Op-code Number”. 
-  If the Name Display Database is installed, the following screen is displayed. 
Ty p e  y and press Enter...

Page 16NDA-30041   Revision 5
INSTALLATION AND CONFIGURATION Second Party Alert User and Installation Guide
Step 6: Specify the OAI Key Code
Use the following instructions to specify the appropriate OAI Key Code:
Type the OAI Key Code used by the PBX to generate the MSF Op-code 
specified in “Step 5: Specify the MSF Op-code Number” on page 15, and press 
Enter. 
-  If you enter an invalid OAI Key Code, the message “ERROR: Invalid OAI 
Key Code, please enter a value of 1...14!!!” is displayed. Type...

NDA-30041   Revision 5Page 17
Second Party Alert User and Installation Guide INSTALLATION AND CONFIGURATION
Step 8: Specify the Secondary Line Chime Flag
Use the following instructions to set the Secondary Line Chime flag:
Ty p e  y and press Enter to enable the Secondary Line Chime, or type n and press 
Enter to disable it. The flag you selected is displayed on the screen. 
Figure 2-10   Secondary Line Chime Flag
Ty p e  n and press Enter to cancel the entry and try again, or type y and press 
Enter...

Page 18NDA-30041   Revision 5
INSTALLATION AND CONFIGURATION Second Party Alert User and Installation Guide
Step 11: Specify the Local Call Method
Use the following instructions to specify the method used to place local calls:
Type the number that specifies the correct local call method for your area, and 
press Enter.
-  If an invalid value is entered, the message “ERROR: Invalid Local Method, 
please enter a value of 1...2!!!” is displayed. Press Enter, type a valid value, 
and press Enter again.
-...

NDA-30041   Revision 5Page 19
Second Party Alert User and Installation Guide INSTALLATION AND CONFIGURATION
Step 12: SPA Auto-Config — New Configuration
-  If a previous version of SPA is installed on the system, installation continues 
with “Step 13: SPA Auto-Config — Update Existing Configuration” on 
page 20.
-  If SPA is not
 installed, the following information screen is displayed, 
indicating that the default configuration values will be used for auto 
configuration. 
Figure 2-14   SPA Auto-Config...

Page 20NDA-30041   Revision 5
INSTALLATION AND CONFIGURATION Second Party Alert User and Installation Guide
Step 13: SPA Auto-Config — Update Existing Configuration
-  If a previous version of SPA is installed on the system, then the following 
information screen is displayed, indicating that the current configuration 
will be updated. 
Figure 2-16   SPA Auto-Config (Existing Config)
Ty p e  Enter to begin the auto configuration process. During the SPA auto 
configuration the following screen is...

NDA-30041   Revision 5Page 21
Second Party Alert User and Installation Guide INSTALLATION AND CONFIGURATION
Step 14: Database Template Installation
After auto configuration, the installation script will install the database template 
files. The following screen will be displayed:
Figure 2-18   Database Template Installation
After the database templates have been installed, SPA installation is complete. 
Now go to “Configure Application” on page 23 to configure the SPA 
applications.
Second Party Alert...

Page 22NDA-30041   Revision 5
INSTALLATION AND CONFIGURATION Second Party Alert User and Installation Guide
Configuration
The following sections describe the configuration of Second Party Alert (SPA).
Access System 
Administration 
MenuTo access the System Administration Menu:
Select the APM option from the APM Platform Management menu.
Enter the System Administrator password at the APM password screen.
Change Facility 
NumberThe Number of Facilities must be set to 9 or greater in the OAI Library...

NDA-30041   Revision 5Page 23
Second Party Alert User and Installation Guide INSTALLATION AND CONFIGURATION
Configure 
ApplicationSPA is configured into the APM system using the Add function of the Application 
Configuration option on the APM System Administration menu. Enter the 
Application Configuration option from the System Administration menu.
This section contains the information that you should enter into the configuration 
file for SPA. For specific instructions on what these parameters mean and...

Page 24NDA-30041   Revision 5
INSTALLATION AND CONFIGURATION Second Party Alert User and Installation Guide
Step 2: Primary Configuration Parameters
On the APM Configuration Entry screen, make an entry for each SPA parameter 
shown below. If the parameter is followed by an asterisks (*) in the table, you must 
make the entry exactly as shown. Other entries serve only as examples — actual 
entries are site-dependent.
Note:
This step is done automatically during installation if you answer YES
 to the...