NEC Second Party Alert User And Installation Guide

SECOND PARTY ALERT
An
Open Application Interface (OAI)
User and Installation Guide
NEC America, Inc.
NDA-30041-005
Revision 5
July, 1999
Stock # 241719 

LIABILITY DISCLAIMER
NEC America reserves the right to change the specifications,  functions, 
or features in this document at any time without notice.  NEC America 
has prepared this document for use by its employees and customers.  The 
information contained herein is the property of NEC  America and shall 
not be reproduced without prior written approval from NEC America.
Copyright 1999
NEC America, Inc. 

NDA-30041  Revision 5Page i
Second Party Alert User and Installation Guide CONTENTS
TABLE OF CONTENTS
Page
Chapter 1 - OPERATING PROCEDURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   1
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  1
Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....

Page iiNDA-30041  Revision 5
CONTENTS Second Party Alert User and Installation Guide
This Page Left Blank. 

NDA-30041  Revision 5Page iii
Second Party Alert User and Installation Guide FIGURES
LIST OF FIGURES
Figure TitlePage
1-1 Dterm Telephone Set  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2
1-2 Caller ID SPA Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2
1-3 Example of SPA Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3
1-4...

Page ivNDA-30041  Revision 5
FIGURES Second Party Alert User and Installation Guide
This Page Left Blank. 

NDA-30041   Revision 5Page 1
Second Party Alert User and Installation Guide OPERATING PROCEDURES
Chapter 1 OPERATING PROCEDURES
Introduction
Second Party Alert (SPA) allows you to identify the person who is calling on 
another line without interrupting the current call. If you receive a call on a 
secondary line while you are on the phone, you can press a function key that 
enables SPA to identify the caller on the D
term Liquid Crystal Display (LCD) panel. 
Information can be displayed on more than one...

Page 2NDA-30041   Revision 5
OPERATING PROCEDURES Second Party Alert User and Installation Guide
Procedures
The following procedures outline the steps for using Second Party Alert (SPA).
Start Second Party 
AlertYou can start SPA at any time, even if you are already speaking on a line, by 
pressing the 
Dterm key assigned to SPA. If you are not sure which key to use, see 
your system administrator.
Figure 1-1   Dterm Telephone Set
Caller 
IdentificationIf you are speaking to someone, and receive a...

NDA-30041   Revision 5Page 3
Second Party Alert User and Installation Guide OPERATING PROCEDURES
Browse List of 
CallersWhen you are using SPA, information about incoming and outgoing calls displays 
on the 
Dterm LCD. Figure 1-3 illustrates a typical SPA display:
Figure 1-3   Example of SPA Display
In the illustration above, a person named Smith is calling on line 1 from extension 
3805. For more information about the items shown on the LCD, see “Display 
Formats” on page 7.
To browse the list of...

Page 4NDA-30041   Revision 5
OPERATING PROCEDURES Second Party Alert User and Installation Guide
Signal an Internal 
CallerIf you are currently speaking with someone and receive an internal call, you can 
use SPA to identify who is calling. You can also signal the caller to acknowledge 
the call and indicate you are on another line.
1. When you receive the internal call, you can see the caller’s name and phone 
extension on your telephone display. 
For more information on the display, refer to “Internal...