NEC Projector Pe401h User Manual

44English ...

User Controls

  PHASE 
Synchronize the signal timing of the display with the graphic card. 
If the image appears to be unstable or fl  ickers, use this function to 
correct it.
  CLOCK
Change the display data frequency to match the frequency of 
your computer’s graphic card. Use this function only if the image 
appears to fl  icker vertically.
  H. POSITION
 Press the  button to move the image left.
 Press the  button to move the image right. 
  V. POSITION
 Press the  button to move...

45... English

User Controls

  LOGO
Use this function to display the startup screen (NEC logo).
 ON: Displays the NEC logo.
 OFF: Not display the NEC logo.
  PC CONTROL MODE
  PC CONTROL: Allow PC control of an individual projector. 
(default setting)
  LAN: Allow projector control via web browser (Internet 
Explorer) using the network.
  NETWORK
Refer to pages 48-50.
  CLOSED CAPTION
Use this function to enable close caption and activate the closed 
caption menu. Select an appropriate closed...

46English ...

User Controls

  SECURITY TIMER
Use this function to set how long (MONTH/DAY/HOUR) the 
projector can be used. Once this time has elapsed you will be  
requested to enter your password again.
 
SETTING | 
ADVANCED | 
SECURITY
  SECURITY
 OFF: Choose “OFF” to be able to switch on the projector with-
out password verifi  cation.
 ON: Choose “ON” to use security verifi  cation when turning on 
the projector.
 
■ First Time: 
1. The Password is 4 digits, default value is “1234”. (fi  rst...

47... English

User Controls

  CHANGE PASSWORD
1.  Press ENTER to enter SECURITY KEYWORD setting.
2.  The password has to be 4 digits.  
Current password
3.  Use number buttons on the remote control, to enter your 
old password and then press ENTER to confi  rm your 
password.
Input new password 
4.  Use number buttons on the remote control, to enter your 
new password and then press ENTER to confi  rm your 
password. 
 Confi  rm new password 
5.  Enter the new password again and press ENTER to...

48English ...

User Controls

  NETWORK STATUS
Display the network connection status. (default: DISCONNECT)
  DHCP
Use this function to select your desired startup screen. If you 
change the setting from one to another, when you exit the OSD 
menu, the new setting will take effect on next open.
 ON: Assign an IP address to the projector from an external 
DHCP server automatically.
 OFF: Assign an IP address manually.
  IP ADDRESS
Select an IP address.
  SUBNET MASK
Select subnet mask number....

49... English

User Controls

1.  Turn on DHCP to allow the DHCP server to automatically assign 
an IP, or manually enter the required network information.
2.  Then choose apply and press ENTER button to complete the 
confi  guration process.
3.  Open your web browser and type in from the OSD LAN screen 
then the web page will display as below:
4. Open “Projector Status and Control” to control your projector. 
 
When making a direct connection from your computer to the 
projector
Step 1: Find an IP...

50English ...

User Controls

Step 2: Select apply and press the ENTER button on the remote control or the control 
panel to submit function or press the MENU button on the remote control or 
the control panel to exit.
Step 3: To open Network Connections, click Start, click Control Panel, click Network 
and Internet Connections, and then click Network Connections. Click the connection you want to configure, and then, under Network Tasks  , click Change settings of this connection.
Step 4: On the General...

51... English

User Controls

  INPUT SEARCH
 ON: The projector will search for other signals if the current input signal is lost. 
 OFF: The projector will only search current input connection.
  INPUT
Use this option to enable / disable input sources. Press ENTER to 
enter the sub menu and select which sources you require. Press 
the ENTER button to finalize the selection. The projector will not 
search for inputs that are not selected. 
  FAN MODE
  AUTO: The built-in fans automatically run at a...

52English ...

User Controls

  LAMP LIFE REMAINING
Showing the Lamp life.
  LAMP HOURS USED
Display the projection time.
  FILTER HOURS USED
Display the fi  lter used time.
  ECO MODE
Choose “ECO” to dim the projector lamp which will lower power 
consumption and extend the lamp life. Choose “OFF” to return to 
normal mode.
  LAMP LIFE REMINDER
Choose this function to show or to hide the warning message 
when the changing lamp message is displayed. 
The message will appear when the lamp has reached the...

53... English

User Controls

  INFORMATION
To display the projector information for source, resolution, and 
software version on the screen.
OPTIONS | 
INFORMATION