NEC Projector Pe401h User Manual

24English ...

Introduction
Viewing 3D Images
The projector provides 3D images to a user wearing commercially 
available LCD shutter eyeglasses.
CAUTION
Health precautionsBefore viewing, be sure to read health care precautions that may be foun\
d in the user’s manual included with your LCD shutter eyeglasses or you\
r 3D compatible content such as DVDs, video games, computer’s video files and the like.To avoid any adverse symptoms, heed the following:- Do not use LCD shutter eyeglasses for viewing any...

25... English

Installation
Connecting the Projector
1.........................................................................\
....................Power cord (supplied)2.........................................................................\
.........................................LAN cable3........................................................................Computer cable (VGA) (supplied)4.........................................................................\...

26English ...

Installation

	Due to the differ-ence in applications for each country, some regions may have different accessories.
Connect to Video Sources
1.........................................................................\
....................Power cord (supplied)2.........................................................................\
......................................HDMI cable3.........................................................................\
....................SCART/VGA...

27... English

Installation

Powering On/Off the Projector
Turn on the projector first and then the signal sources.or
(*)When “Power-Saving” is selected for “Standby Mode”,the Power LED will turn red; when “Normal” is selected for “Standby Mode”, the Power LED will turn orange.
 1
 2
Lens Cover
Power
	When you first turn on the projec-tor, you will get the Startup menu. This menu gives you the opportunity to select the menu languages. To select the language, 
use the , , 
, or  button on the remote...

28English ...

Installation

Powering Off the Projector
1.    Press the “POWER OFF” button on the remote control or the 
 button on the control panel to turn off the projector lamp, 
you will see a message as below on the on-screen display.
 
2.   Press the “POWER OFF” button again to confi  rm. 
3.   Disconnect the power cord from the electrical outlet and the 
projector. If you disconnect the power cord while viewing 
the picture and connect the power cord again, wait for at 
least one second until...

29... English

Installation

 Warning Indicator
   When the “STATUS” LED indicator fl  ashes red, it indicates 
the projector has overheated. The projector will automati-
cally shut itself down.
 
   When the “LAMP” LED indicator turns red and the message 
below displays on-screen, the projector has detected that the 
lamp is approaching its end of life. When you see this mes-
sage, change the lamp as soon as possible. 
 
   When the “STATUS” LED indicator fl  ashes red and the 
message below...

30English ...

Installation

233
1

Adjusting the Projected Image
Adjusting the Height of Projector Image
The projector is equipped with tilt foot and rear feet to raise and 
lower the image to fill the screen.
1.  Press the tilt foot release. u	
Raise or lower the image to the desired height angle, then 
release the button to lock the tilt foot into position. v
2.  Rotate the rear feet counter clockwise to raise the projector 
or clockwise to lower it. w
 2
 1
 3 3
	By using the tilt foot the...

31... English

Installation

 Adjusting the Projector Zoom/Focus
You may turn the zoom ring to zoom in or out. To focus the im-
age, rotate the focus ring until the image is clear. The projector 
will focus at distances from 32 to 474 inch (0.82 to 12.0 meters) 
with mechanical travel.Zoom Lever
Focus Ring
Adjusting Projection Image Size
Screen Width
Screen Hight
Screen Center
Screen Diagonal (A)
Throw Angle 
(α)
Lens Center
(D)
(B)
Throw Distance (C) 

32English ...

Installation
Screen Size(B)(C)(D)(α)
Diagonal (A)WidthHeightWideTeleWideTele
inchmminchmminchmminchmminchmminchmminchmmdegreedegree
23584205091128671893281555138524613.17.8
3076226664153741024742106370180626013.17.8
40101635886204981332956141795240938013.17.8
60152452132829747194938421251423613512013.17.8
721829631594358972359210025501714336614313.17.8
802032701771399962665711228341904817615913.17.8
8421347318604110462769011729751995058716713.17.8...

33... English

User Controls
The Projector has a multilingual On Screen Display that allows 
you to make image adjustments and change a variety of set-
tings.
How to operate 
1.  To open the OSD, press the MENU button on the Remote Control.
2.   When OSD is displayed, use the     buttons to select any item 
in the main menu. While making a selection on a particular page, 
press the  button to enter sub menu.
3.   Use the     buttons to select the desired item in the sub menu 
and adjust the settings by...