NEC Projector Pe401h User Manual

14English ...

Introduction

Battery Installation
Remote Control Precautions
• Handle the remote control carefully.
• If the remote control gets wet, wipe it dry immediately.
• Avoid excessive heat and humidity.
• Do not place the battery upside down.
• Replace only with the same or equivalent type recommended by the manufacturer.
• Dispose of used batteries according to your local regulations
1. Press firmly and slide the battery cover off.
2.  Install new batteries (AAA). 
Ensure that you have the...

15... English

Introduction

Using the Downloadable Software
Using the Computer Cable (VGA) to Operate the 
Projector (Virtual Remote Tool)
Using the utility software “Virtual Remote Tool” that you can 
download from our web site (http://www.nec-display.com/
dl/en/index.html), Virtual Remote screen (or toolbar) can be 
displayed on your computer screen.
This will help you perform operations such as projector’s 
power on or off and signal selection via the computer cable 
(VGA), serial cable, or LAN...

16English ...

Introduction

Step 1: Install Virtual Remote Tool on the computer
 •  Supported OS
Virtual Remote Tool will run on the following operating systems.
Windows 8 *1, Windows 8 Pro *1, Windows 8 Enterprise *1, 
Windows 7 Home Basic, Windows 7 Home Premium, Windows 7 Professional, 
Windows 7 Enterprise, Windows 7 Ultimate
Windows Vista Home Basic, Windows Vista Home Premium, Windows Vista Busi\
ness, 
Windows Vista Enterprise, Windows Vista Ultimate
Windows XP Home Edition *1, Windows XP...

17... English

Introduction

Follow the instructions on the installer screens to complete the 
installation.
After the installation is completed, the shortcut icon for Virtual 
Remote Tool
TIP:Uninstalling Virtual Remote Tool
•  Preparation:Exit Virtual Remote Tool before uninstalling. To uninstall Virtual Remot\
e Tool, the Windows user account must have “Administrator” privilege\
 (Windows 8, Windows 7 and Windows Vista) or “Computer Administra-tor” privilege (Windows XP).
•  
For Windows 7/Windows...

18English ...

Introduction

TIP:
•  When Virtual Remote Tool starts for the first time, “Easy Setup” window will be displayed to navigate your connections.
Step 3: Start Virtual Remote Tool
Start using the shortcut icon 
Start from the Start menu
Click [Start] -> [All Programs] or [Programs] -> [NEC Projector 
User Supportware] -> [Virtual Remote Tool] -> [Virtual Remote 
Tool].
When Virtual Remote Tool starts for the first time, “Easy Setup” 
window will be displayed.
Follow the instructions on the...

19... English

Introduction

Exiting Virtual Remote Tool
1  Click the Virtual Remote Tool icon  on the Taskbar.
The pop-up menu will be displayed.
2 Click “Exit”.
The Virtual Remote Tool will be closed.
Viewing the help file of Virtual Remote Tool
Displaying the help file using the taskbar
1   Click the Virtual Remote Tool icon on the taskbar when Virtual Remote  
Tool is running.
The pop-up menu will be displayed.
2  Click “Help”.
 The Help screen will be displayed
Displaying the help file using the...

20English ...

Introduction

Controlling the Projector over a LAN 
[Using on Windows]
Using the utility software “PC Control Utility Pro 4” that you 
can download from our web site  
(http://www.nec-display.com/dl/en/index.html), the projector 
can be controlled from a computer over a LAN.
Control Functions
Power On/Off, signal selection, picture freeze, picture mute, 
audio mute, adjusting, error message notification, event sched-
ule.
Screen of PC Control Utility Pro 4
This section provides an outline...

21... English

Introduction

Step 1: Install PC Control Utility Pro 4 on the computer
 •  Supported OS - PC Control Utility Pro 4 will run on the following 
operating systems.
Windows 8 *1, Windows 8 Pro *1, Windows 8 Enterprise *1,
Windows  7  Home  Basic,  Windows  7  Home  Premium,  Windows  7 Professional, Windows 7 Enterprise, Windows 7 Ultimate
Windows Vista Home Basic, Windows Vista Home Premium, Windows Vista Business, Windows Vista Enterprise, Windows Vista Ultimate 
Windows XP Home Edition *1,...

22English ...

Introduction

Read “END USER LICENSE AGREEMENT” carefully.
4   If you agree, click “I accept the terms in the license agreement” \
and then 
click “Next”.
Follow the instructions on the installer screens to complete the 
installation.
TIP:Uninstalling PC Control Utility Pro 4
•   To uninstall PC Control Utility Pro 4, do the same procedures stated as \
in “Uninstalling Virtual Remote Tool”. Read “Virtual Remote Tool”\
 as “PC Control Utility Pro 4” (-> page 19)
Step 2: Connect the...

23... English

Introduction

5  Click “Open” in the dialog box. If prompted, enter an administrato\
r name 
and password.
The installer will start.
6  Click “Next”.
“END USER LICENSE AGREEMENT” screen will be displayed.
7   Read “END USER LICENSE AGREEMENT” and click “Next”. 
The confirmation window will be displayed.
8  Click “I accept the terms in the license agreement”.
Follow the instructions on the installer screens to complete the install\
ation.
Step 2: Connect the projector to a LAN
Connect the...