NEC Projector Pe401h User Manual

Projector
PE401H
User’s Manual
Model No.
NP-PE401H 

Ver.1/01/2013
• DLP, BrilliantColor, and DLP Link are trademarks of Texas Instrumen\
ts.• IBM is a trademark or registered trademark of International Busines\
s Machines Corporation.
•  Macintosh, Mac OS X, iMac, and PowerBook are trademarks of Apple Inc., r\
egistered in the U.S. and 
other countries.
•   Microsoft, Windows, Windows Vista, Internet Explorer, .NET Framework, an\
d PowerPoint are 
either a registered trademark or trademark of Microsoft Corporation in t\
he United States and/or other...

iEnglish ...
Important Information
Safety Cautions
Precautions
Please read this manual carefully before using your NEC projector and ke\
ep the manual handy for future reference.
CAUTION
To turn off main power, be sure to remove the plug from power outlet.The power outlet socket should be installed as near to the equipment as \
possible, and should be easily accessible.
CAUTION
TO PREVENT SHOCK, DO NOT OPEN THE CABINET.THERE ARE HIGH-VOLTAGE COMPONENTS INSIDE.REFER SERVICING TO QUALIFIED SERVICE...

iiEnglish ...
Important Information
RF Interference (for USA only)
WARNINGThe Federal Communications Commission does not allow any modifications or changes to the unit EXCEPT those specified by NEC Display Solutions of America, Inc. in this manual. Failure to comply with this government regulation could void your right to operate this equipme\
nt. This equipment has been test-ed and found to comply with the limits for a Class B digital device, pur\
suant to Part 15 of the FCC Rules. These limits are...

iiiEnglish ...
Important Information
  Fire and Shock Precautions  
•  Ensure that there is sufficient ventilation and that vents are unobstructed to prevent the build-up of heat inside your projector. Allow at least 4 inches (10cm) of space between\
 your projector and a wall.
•   Do not try to touch the ventilation outlet as it can become heated while\
 the projector is turned on and im-mediately after the projector is turned off.
•  Prevent foreign objects such as paper clips and bits of paper from...

ivEnglish ...
Important Information
  Remote Control Precautions
•  Handle the remote control carefully.
•   If the remote control gets wet, wipe it dry immediately.
•   Avoid excessive heat and humidity.
•   Do not short, heat, or take apart batteries.
•   Do not throw batteries into fire.
•   If you will not be using the remote control for a long time, remove the \
batteries. 
•   Ensure that you have the batteries’ polarity (+/–) aligned corre\
ctly. 
•   Do not use new and old batteries together, or...

vEnglish ...
Important Information
About High Altitude mode 
•    Set [FAN MODE] to [HIGH SPEED] when using the projector at altitudes app\
roximately 2500 feet/760 meters or higher. 
•     Using the projector at altitudes approximately 2500 feet/760 meters or h\
igher without setting to [HIGH 
SPEED] can cause the projector to overheat and the protector could shut \
down. If this happens, wait a couple minutes and turn on the projector. 
•     Using the projector at altitudes less than approximately...

1... English

Table of Contents
Table of Contents...............................1
Usage Notice .....................................2
Precautions  .........................................2
Introduction  ........................................4
Product Features  ................................4
Package Overview  ..............................6
Product Overview  ...............................7
Projector  .................................................7
Connection Ports...

2English ...

Usage Notice

Precautions
 
Follow all warnings, precautions and maintenance as recom-
mended in this user’s guide to maximize the life of your unit.
■ Warning-This projector will detect the life of the lamp 
itself. Please be sure to change the lamp when it 
shows warning messages.
■ Warning-Reset the “CLEAR LAMP HOURS” function 
from the on-screen display “OPTIONS |LAMP/
FILTER SETTINGS” menu after replacing the 
lamp module (refer to page 52).
■ Warning-When switching the projector off,...

3... English

Usage Notice

  Do:
■   Turn off the product before cleaning.
■   Use a soft cloth moistened with mild detergent to clean the 
display housing.
■   Disconnect the power plug from AC outlet if the product is not 
being used for a long period of time.
■   If the lens is soiled, use a commercially available cleaning cloth 
for lens.
  Do not:
■   Use abrasive cleaners, waxes or solvents to clean the unit.
■   Use under the following conditions:
-   Extremely heat, cold or humidity.
-   In...