NEC Projector Pe401h User Manual

34English ...

User Controls

Menu Tree 
Main MenuSub MenuSettings
IMAGE
GENERAL
PICTURE MODE
WALL COLOR
BRIGHTNESS 0 to 100CONTRAST 0 to 100
SHARPNESS0 to 31 
SATURATION 0 to 100
HUE0 to 100
ADVANCED
GAMMA
BrilliantColor™  0 to 10
COLOR TEMP.LOW / MEDIUM / HIGH
DYNAMIC CONTRAST OFF/ ON
COLOR
COLOR SPACEAUTO / RGB / YUV
SCREEN
GENERAL
ASPECT RATIO
OVERSCAN 0[%], 5[%], 10[%]V KEYSTONE -40 to 40
3D SETTING
3DOFF / ON3D INVERT OFF / ON3D STRUCTURE
SETTING
GENERAL
LANGUAGE
ORIENTATION
REMOTE SENSOR
HDMI...

35... English

User Controls

Main MenuSub MenuSettings
SETTING
ADVANCED
LOGO OFF / ONPC CONTROL MODE PC CONTROL / LANNETWORKNETWORK STATE DISCONNECT / CONNECTDHCPOFF / ONIP ADDRESS 0.0.0.0SUBNET MASK 0.0.0.0GATEWAY0.0.0.0DNS 0.0.0.0APPLYCLOSED CAPTION
SECURITYSECURITYOFF / ONSECURITY TIMER MONTH / DAY / HOURCHANGE PASSWORD³
OPTIONS
GENERAL
INPUT SEARCH OFF / ONINPUT
FAN MODE AUTO / HIGH SPEEDINFORMATION HIDE OFF / ONBACKGROUND COLOR BLACK / BLUERESETNO / YESLAMP LIFE REMAINING 100% ..1%LAMP HOURS...

36English ...

User Controls

 PICTURE MODE
There are many factory presets optimized for various types of 
images. Use the  or  button to select the item. 
 PRESENTATION: For computer or notebook.
 HIGH-BRIGHT: Maximum brightness from PC input.
 VIDEO: This mode is recommended for typical TV program 
viewing. 
 MOVIE: For home theater.
 sRGB: Standardized accurate color.
 BLACKBOARD: This mode should be selected to achieve 
optimum color settings when projecting onto a blackboard 
(green).
...

37... English

User Controls

 CONTRAST
The contrast controls the degree of difference between the lightest 
and darkest parts of the picture. Adjusting the contrast changes the 
amount of black and white in the image.
 Press the  button to decrease the contrast.
 Press the  button to increase the contrast.
  SHARPNESS
Adjust the sharpness of the image.
  Press the  button to decrease the sharpness.
  Press the  button to increase the sharpness. 
  SATURATION
Adjust a video image from black and...

38English ...

User Controls

	The Color Temp is not available when “HIGH-BRIGHT” or “sRGB” is selected for “PIC-TURE MODE”.
  GAMMA
This allows you to choose a gamma table that has been fi  ne-tuned 
to bring out the best image quality for the input.
  FILM: for home theater.
  VIDEO: for video or TV source.
  GRAPHICS: for image source.
  PC: for PC or computer source.
  BLACKBOARD: for displaying on the blackboard. 
  BrilliantColor™
This adjustable item utilizes a new color-processing...

39... English

User Controls

 button to select item.
   RED GAIN/GREEN GAIN/BLUE GAIN/RED BIAS/GREEN 
BIAS/BLUE BIAS/CYAN GAIN/MAGENTA GAIN/
YELLOW GAIN: Use the  or  button to select RED, GREEN, 
BLUE, CYAN, MAGENTA AND YELLOW COLORS.
    RESET: Choose “YES” to return the factory default settings for 
color adjustments.
 
  COLOR SPACE
Select an appropriate color matrix type from AUTO, RGB or YUV. 

40English ...

User Controls

  ASPECT RATIO
Use this function to choose your desired aspect ratio.
  4:3: This format is for 4×3 input sources.
  16:9: This format is for 16×9 input sources, like HDTV and DVD 
enhanced for Wide screen TV. 
  16:10: This format is for 16×10 input sources, like widescreen 
laptops.
  15:9: This format is for non-16x9, letterbox source and for users 
who use external 16x9 lens to display 1.67:1 aspect ratio using 
full resolution.
  5:4: This format is for 5×4 input...

41... English

User Controls

TIP: 3D supported signal
•  For PC Signal :1024x768@120Hz, 1024x768@60Hz,1280x720@120Hz,1280x720@60Hz1280x800@120Hz,1280x800@60Hz•  For Video Signal :480i@60Hz•  For HDMI Signal :720p, 1080p @Frame Packing720p,1080i/p @Top and Bottom720p, 1080i/p @Side by Side (Half)
   3D
Choose “ON” to turn this item on for 3D images. (default: OFF)
  3D INVERT
 Choose “ON” to invert left and right frame contents.
 Choose “OFF” for default frame contents. 
  3D STRUCTURE
Adjust the 3D...

42English ...

User Controls

  LANGUAGE
Choose the multilingual OSD menu. Press the  or  button into 
the sub menu and then use the  or  button to select your 
preferred language. Press ENTER to fi  nalize the selection. 
 ORIENTATION
 DESKTOP FRONT:
This is the default selection. The image is projected straight on 
the screen.
 DESKTOP REAR:
When selected, the image will appear reversed.
 CEILING FRONT:
When selected, the image will turn upside down.
 CEILING REAR
When selected, the image will...

43... English

User Controls

 REMOTE SENSOR
Choose the remote sensor location.
 HDMI SETTINGS
Use this feature to set HDMI1/HDMI2
 VIDEO LEVEL:  Select “AUTO” to automatically detect video 
level. If automatic detection may not work well, select “NOR-
MAL” to disable the “ENHANCED” feature of your HDMI 
equipment or select “ENHANCED” to improve image contrast 
and increase detail in the dark areas. 
 AUDIO SELECT: Use this function to select the audio souce 
from “HDMI1”, “HDMI2”or “COMPUTER”....