NEC Projector Pe401h User Manual

							
34English ...

User Controls

Menu Tree 
Main MenuSub MenuSettings
IMAGE
GENERAL
PICTURE MODE
WALL COLOR
BRIGHTNESS 0 to 100CONTRAST 0 to 100
SHARPNESS0 to 31 
SATURATION 0 to 100
HUE0 to 100
ADVANCED
GAMMA
BrilliantColor™  0 to 10
COLOR TEMP.LOW / MEDIUM / HIGH
DYNAMIC CONTRAST OFF/ ON
COLOR
COLOR SPACEAUTO / RGB / YUV
SCREEN
GENERAL
ASPECT RATIO
OVERSCAN 0[%], 5[%], 10[%]V KEYSTONE -40 to 40
3D SETTING
3DOFF / ON3D INVERT OFF / ON3D STRUCTURE
SETTING
GENERAL
LANGUAGE
ORIENTATION
REMOTE SENSOR
HDMI SETTINGSHDMI1VIDEO LEVEL / AUDIO SELECTHDMI2VIDEO LEVEL / AUDIO SELECTMUTE OFF / ONVOLUME0 to 31
SIGNAL
PHASECLOCKH. POSITIONV. POSITION
PRESENTATION / HIGH-BRIGHT / VIDEO / MOVIE / sRGB / BLACKBOARD / USER1 / USER2OFF / RED / GREEN / BLUE / CYAN / MEGENTA / YELLOW
FILM / VIDEO / GRAPHICS / PC / BLACKBOARD
RED GAIN / GREEN GAIN / BLUE GAIN / CYAN GAIN / MAGENTA GAIN / YELLOW GAIN / RED BIAS / GREEN BIAS / BLUE BIAS / RESET
4:3 / 16:9 / 16:10 / 15:9 / 5:4 / NATIVE / AUTO 
AUTO / FRAME PACKING / TOP-AND-BOTTOM / SIDE-BY-SIDE / FRAME SEQUENTIALENGLISH / DEUTSCH / FRANÇAIS / ITALIANO / ESPAÑOL / PORTUGUÊS / POLSKI / JMKKDBC / SVENSKA /  NORSK / 

						

							
35... English

User Controls

Main MenuSub MenuSettings
SETTING
ADVANCED
LOGO OFF / ONPC CONTROL MODE PC CONTROL / LANNETWORKNETWORK STATE DISCONNECT / CONNECTDHCPOFF / ONIP ADDRESS 0.0.0.0SUBNET MASK 0.0.0.0GATEWAY0.0.0.0DNS 0.0.0.0APPLYCLOSED CAPTION
SECURITYSECURITYOFF / ONSECURITY TIMER MONTH / DAY / HOURCHANGE PASSWORD³
OPTIONS
GENERAL
INPUT SEARCH OFF / ONINPUT
FAN MODE AUTO / HIGH SPEEDINFORMATION HIDE OFF / ONBACKGROUND COLOR BLACK / BLUERESETNO / YESLAMP LIFE REMAINING 100% ..1%LAMP HOURS USEDFILTER HOURS USEDECO MODE OFF / ONLAMP LIFE REMINDER OFF / ONFILTER USAGE HOURSCLEAR LAMP HOURSCLEAR FILTER HOURS
INFORMATION
MODEL NO.SERIAL NUMBERSOURCERESOLUTIONSOFTWARE VERSION
ADVANCED
STANDBY MODEPOWER-SAVING / NORMALDIRECT POWER ON OFF / ONAUTO POWER OFF (MIN.) 0 to 180OFF TIMER (MIN.) 0 to 995CONTROL PANEL LOCK OFF / ON
OFF / CC1 / CC2 / CC3 / CC4 / T1 / T2 / T3 / T4
COMPUTER / HDMI1 / HDMI2 / VIDEO / S-VIDEO
LAMP/FILTER SETTINGS 
						

							
36English ...

User Controls

 PICTURE MODE
There are many factory presets optimized for various types of 
images. Use the  or  button to select the item. 
 PRESENTATION: For computer or notebook.
 HIGH-BRIGHT: Maximum brightness from PC input.
 VIDEO: This mode is recommended for typical TV program 
viewing. 
 MOVIE: For home theater.
 sRGB: Standardized accurate color.
 BLACKBOARD: This mode should be selected to achieve 
optimum color settings when projecting onto a blackboard 
(green).
 USER1/USER2: Memorize user’s settings.
  WALL COLOR
Use this function to choose a proper color according to the wall. It 
will compensate the color deviation due to the wall color to show 
the correct image tone.
  BRIGHTNESS
Adjust the brightness of the image.
Press the  button to darken image.
Press the  button to lighten the image.
IMAGE | 
GENERAL 
						

							
37... English

User Controls

 CONTRAST
The contrast controls the degree of difference between the lightest 
and darkest parts of the picture. Adjusting the contrast changes the 
amount of black and white in the image.
 Press the  button to decrease the contrast.
 Press the  button to increase the contrast.
  SHARPNESS
Adjust the sharpness of the image.
  Press the  button to decrease the sharpness.
  Press the  button to increase the sharpness. 
  SATURATION
Adjust a video image from black and white to fully saturated color.
   Press the  button to decrease the amount of saturation in the 
image.
   Press the  button to increase the amount of saturation in the 
image. 
  HUE
Adjust the color balance of red and green.
  Press the  button to increase the amount of green in the image.
  Press the  button to increase the amount of red in the image. 
Input signalBRIGHTNESSCONTRASTSHARPNESSSATURATIONHUE
COMPUTER/ HDMI (RGB)YESYESYESNONO
COMPUTER/ HDMI (COMPONENT)YESYESYESYESYES
VIDEO/S-VIDEOYESYESYESYESYES
 Yes=Adjustable, No=Not adjustable 
						

							
38English ...

User Controls

	The Color Temp is not available when “HIGH-BRIGHT” or “sRGB” is selected for “PIC-TURE MODE”.
  GAMMA
This allows you to choose a gamma table that has been fi  ne-tuned 
to bring out the best image quality for the input.
  FILM: for home theater.
  VIDEO: for video or TV source.
  GRAPHICS: for image source.
  PC: for PC or computer source.
  BLACKBOARD: for displaying on the blackboard. 
  BrilliantColor™
This adjustable item utilizes a new color-processing algorithm 
and system level enhancements to enable higher brightness while 
providing true, more vibrant colors. The range is from “0” to “\
10”. 
If you prefer a stronger enhanced image, adjust toward the maxi-
mum setting. For a smoother, more natural image, adjust toward 
the minimum setting.
  COLOR TEMP.
Adjust the color temperature. At higher temperature, the screen 
looks colder; at lower temperature, the screen looks warmer.
  DYNAMIC CONTRAST
Turning this item on allows the contrast ratio to be adjusted to the 
proper level.
  COLOR
Press  ENTER into  the  next  menu  as  below  and  then  use  the  or 
IMAGE | 
ADVANCED 
						

							
39... English

User Controls

 button to select item.
   RED GAIN/GREEN GAIN/BLUE GAIN/RED BIAS/GREEN 
BIAS/BLUE BIAS/CYAN GAIN/MAGENTA GAIN/
YELLOW GAIN: Use the  or  button to select RED, GREEN, 
BLUE, CYAN, MAGENTA AND YELLOW COLORS.
    RESET: Choose “YES” to return the factory default settings for 
color adjustments.
 
  COLOR SPACE
Select an appropriate color matrix type from AUTO, RGB or YUV. 
						

							
40English ...

User Controls

  ASPECT RATIO
Use this function to choose your desired aspect ratio.
  4:3: This format is for 4×3 input sources.
  16:9: This format is for 16×9 input sources, like HDTV and DVD 
enhanced for Wide screen TV. 
  16:10: This format is for 16×10 input sources, like widescreen 
laptops.
  15:9: This format is for non-16x9, letterbox source and for users 
who use external 16x9 lens to display 1.67:1 aspect ratio using 
full resolution.
  5:4: This format is for 5×4 input sources.
  NATIVE: This format displays the original image without any 
scaling.
  AUTO: Automatically selects the appropriate display format.
  OVERSCAN
Overscan function removes the noise in a video image. Overscan the 
image to remove video encoding noise on the edge of video source. 
  V KEYSTONE
Press the  or  button to adjust image distortion vertically. If 
the image looks trapezoidal, this option can help make the image 
rectangular.
	Each I/O has different setting of “OVERSCAN”.
SCREEN | 
GENERAL 
						

							
41... English

User Controls

TIP: 3D supported signal
•  For PC Signal :1024x768@120Hz, 1024x768@60Hz,1280x720@120Hz,1280x720@60Hz1280x800@120Hz,1280x800@60Hz•  For Video Signal :480i@60Hz•  For HDMI Signal :720p, 1080p @Frame Packing720p,1080i/p @Top and Bottom720p, 1080i/p @Side by Side (Half)
   3D
Choose “ON” to turn this item on for 3D images. (default: OFF)
  3D INVERT
 Choose “ON” to invert left and right frame contents.
 Choose “OFF” for default frame contents. 
  3D STRUCTURE
Adjust the 3D format to display 3D content correctly.
 
	“3D INVERT” 
and “3D 
STRUCTURE”only available when 3D is enabled.
	Compatible 3D source, 3D content and active shutter glasses are required for 3D viewing.
SCREEN | 
3D SETTING 
						

							
42English ...

User Controls

  LANGUAGE
Choose the multilingual OSD menu. Press the  or  button into 
the sub menu and then use the  or  button to select your 
preferred language. Press ENTER to fi  nalize the selection. 
 ORIENTATION
 DESKTOP FRONT:
This is the default selection. The image is projected straight on 
the screen.
 DESKTOP REAR:
When selected, the image will appear reversed.
 CEILING FRONT:
When selected, the image will turn upside down.
 CEILING REAR
When selected, the image will appear reversed in upside down 
position.
	DESKTOP-REAR and CEILING-REAR are to be used with a translucent screen.
SETTING | 
GENERAL 
						

							
43... English

User Controls

 REMOTE SENSOR
Choose the remote sensor location.
 HDMI SETTINGS
Use this feature to set HDMI1/HDMI2
 VIDEO LEVEL:  Select “AUTO” to automatically detect video 
level. If automatic detection may not work well, select “NOR-
MAL” to disable the “ENHANCED” feature of your HDMI 
equipment or select “ENHANCED” to improve image contrast 
and increase detail in the dark areas. 
 AUDIO SELECT: Use this function to select the audio souce 
from “HDMI1”, “HDMI2”or “COMPUTER”. 
 MUTE
 Choose “ON” to turn mute on. 
 Choose “OFF” to turn mute off. 
 VOLUME
  Press the  button to decrease the volume.
  Press the  button to increase the volume.
	“HDMI SETTING” is only supported under HDMI source.