NEC Neax2000 Ivs Small Platform System Manual

ND-46551 (E) CHAPTER 3
Page 139
Revision 2.0
NAP-200-008
Sheet 13/13
Switch Setting of Circuit Card
7. PN-8LCS (LC)
(1) Locations of Lamps, Switches and Connectors
Figure 008-6  PN-8LCS (LC) Card
(2) Lamp Indications
(3) Switch Settings
This card has no switches.
Table 008-12  PN-8LCS (LC) Card Lamp Indications
LAMP NAME COLOR FUNCTION
BL0 - 7 Red• Remains lit when the corresponding circuit is in use.
• Flashes at 60 IPM when the corresponding circuit is in the make-busy state or the 
system data for...

CHAPTER 3 ND-46551 (E)
Pag e 1 40
Revision 2.0
NAP-200-009
Sheet 1/3
Mounting of Circuit Cards
1. MOUNTING PROCEDURE
(1) For testing, turn on “SW1” switch on the PZ-PW86 Card.  Make sure that “ON” lamp (Green) is lit.
(2) Turn off “SW1” switch.
Figure 009-1  PZ-PW86(C) Card Lamp Indication
PZ-PW86
ON
OFFSW1 SWITCH
ON LAMP (GREEN)
MN
MJ
ON 

ND -4 6551 ( E)  CHAPTER 3
NAP-200-0 09
CARD  FRONT  SIDE
WR IST  STRAP
TO  FRA ME GROUND  CONNECTION
CARD CONT ACT S IDE 

CHAPTER 3  ND -4 6551 ( E)
NAP-2 00-0 09
A
B
F ig . A 

ND-46551 (E) CHAPTER 3
Page 143
Revision 2.0
NAP-200-010
Sheet 1/7
System Initialization and 
System Data Entr y
1. SYSTEM INITIALIZATION
• There are two methods for System Initialization.  The first method is to Clear All Data, except LEN0000
as a CAT terminal, and then program the System Data.  The second method is to use the Resident System
Program, which causes the system to configure itself automatically to the default settings, wherever the
line/trunk cards are installed.  Refer to the System Data...

CHAPTER 3 ND-46551 (E)
Pag e 1 44
Revision 2.0
NAP-200-010
Sheet 2/7
System Initialization and 
System Data Entr y
2. SYSTEM DATA ENTRY
• There are two methods for data entry, both of which employ a Customer Administration Terminal (CAT)
or a Maintenance Administration Terminal (MAT).
2.1 CAT
Any Multiline Terminal can be assigned as a CAT terminal through programming.  The Multiline Terminal can still
be used as a regular telephone when it is not in CAT mode.  If the system is initialized by “C”...

ND-46551 (E) CHAPTER 3
Page 145
Revision 2.0
NAP-200-010
Sheet 3/7
System Initialization and 
System Data Entr y
To reset CAT mode:
While “COMMAND = -” is displayed on the LCD:
(1) Lift the handset (off hook)
- SPKR lamp turns off.
(2) Restore the handset (on hook)
- CNF, ANS lamps turn off.
- LCD returns to clock.
2.2 MAT
In addition to the CAT mode programming, the MAT can also be used in the MAT mode.  Refer to the MAT Oper-
ation Guide and the Command Manual.
2.3 Feature Programming
This section...

CHAPTER 3 ND-46551 (E)
Pag e 1 46
Revision 2.0
NAP-200-010
Sheet 4/7
System Initialization and 
System Data Entr y
(1) Programming Procedure for Music On Hold
For providing Hold Tone Source on the MP card:
For providing External Hold Tone Source through the MP card:
DESCRIPTION DATA
Select the music to be provided. (1) 183
(2) 0: Nocturne
1 : Minuet
Define the type of call to be provided with Hold Tone 
on the MP card.
Note:When using the MP card, set the JP1
switch to UP (Internal Hold Tone Source)..Y =...

ND-46551 (E) CHAPTER 3
Page 147
Revision 2.0
NAP-200-010
Sheet 5/7
System Initialization and 
System Data Entr y
For providing External Hold Tone Source through MP card:
• External Hold Tone Source provided locally
For connecting the External Hold Tone Source, plug the cable into JACK on the MP card.
Set the switches on the MP card as follows:
For providing Hold Tone Source on the MP card: Set the JP1 switch to UP.
PBX
MP CARD
JACKEXTERNAL HOLD TONE SOURCE
JP1
VR
MP CARD
JP1: INTERNAL/EXTERNAL
HOLD TONE...

CHAPTER 3 ND-46551 (E)
Pag e 1 48
Revision 2.0
NAP-200-010
Sheet 6/7
System Initialization and 
System Data Entr y
(2) Programming Procedure for Push button Calling
DESCRIPTION DATA
Assign the Card Number of internal PB Receiver to 
the LEN No. 0124.
Note:When using the internal PB Receiver on
the MP card, assign the Card No. E200-
E203 to the LEN No. 0124.
If resident load is used, PB Receiver ports
(E200-LENS 0124) are automatically as-
signed.(1) LEN: 0124
(2) E200-E203 (PB Receiver No.)
Assign the...