NEC Neax2000 Ivs Command Manual

CHAPTER 3 ND-45669 (E)
Pag e 4 08
Revision 2.0
CMD100
COMMAND CODE
TITLE:
SYSTEM DATA PARTIAL CLEAR
D100
AP OFF LINE
Note:Before clearing the system data by this command, make the following switch setting on the PN-AP00 card.
1. FUNCTION:
This command is used to delete the data related only to the designated Command Code among the Sys-
tem Data for Billing and for assigning “0” as the data.
2. PRECAUTION:
None
3. ASSIGNMENT PROCEDURE:
STDE + D100 + ++DE + +EXE DXXXCCC
Command Code of the data to be...

ND-45669 (E) CHAPTER 3
Pag e 4 09
Revision 2.0
CMD101
COMMAND CODE
TITLE:
SYSTEM DATA ALL CLEAR
D101
AP OFF LINE
Note:Before clearing the system data by this command, make the following switch setting on the PN-AP00 card.
1. FUNCTION:
This command is used to delete all the System Data for Billing and for assigning the initial data.
2. PRECAUTION:
None
3. ASSIGNMENT PROCEDURE:
STDE + D101 + ++DE + +EXE 0000 CCC
4
3
2
1 SW1
ON
: Position to be set [CMD101] System Data All Clear 

CHAPTER 3 ND-45669 (E)
Pag e 4 10
Revision 2.0
CMD102
COMMAND CODE
TITLE:
ADDITIONAL MEMORY CLEAR
D102
AP OFF LINE
Note 1:By entering the 1st data “0000”, the status of the additional memory (SRAM card) will display
as follows:
Note 2:Before clearing system data by this command, make the following switch setting on the PN-AP00
card.
1. FUNCTION:
When mounting additional memory (SRAM card), this command is used to delete its stored data.
2. PRECAUTION:
None
3. ASSIGNMENT PROCEDURE:
STDE + D102 + ++DE +...

ND-45669 (E) CHAPTER 4
Page 411
Revision 2.0
RESIDENT SYSTEM PROGRAM
CHAPTER 4 RESIDENT SYSTEM PROGRAM
1. GENERAL
The resident system program generates system data automatically according to the system hardware configu-
ration, thereby providing immediate operation and shorter programming time. When activated, the system
scans hardware configuration (such as line/trunk card location) and assigns the system data (such as station
numbers, trunk numbers, etc.) according to a predetermined generic program...

CHAPTER 4 ND-45669 (E)
Page 412 Addendum-002
Revision 2.2 JANUARY, 1999
RESIDENT SYSTEM PROGRAM
4. PROGRAMMED DATA TABLES
• Basic Service Feature (CM08)
The following data is assigned on a per service feature basis.
Table 4-1  Basic Service Feature
: Initial Data
CM08
FEATURE 
No.DATA  
0/1FEATURE 
No.DATA  
0/1FEATURE
No.DATA 
0/1FEATURE
No.DATA  
0/1FEATURE
No.DATA  
0/1FEATURE 
No.DATA 
0/1FEATURE 
No.DATA 
0/1
012 1 050  1 101 1 150 1 221 1 264 1 379 1
014 051 102 0 151 1 222 1 265 380
018 055 103 0...

ND-45669 (E) CHAPTER 4
Page 413
Revision 2.0
RESIDENT SYSTEM PROGRAM
• Station Number, Trunk Number, Card Number (CM10)
The following data is assigned according to the sequential slot location number of the associated circuit
cards.
Note:If the DSS Console is not connected to the system, though the PN-4DLC card is mounted in the slot, the
data (F200-F455) for Multiline Terminal is assigned.
Table 4-2  Station Number, Trunk Number, Card Number
CARD PURPOSE ASSIGNED DATA REMARKS
PN-4LC Single  Line...

CHAPTER 4 ND-45669 (E)
Page 414 Addendum-002
Revision 2.2 JANUARY, 1999
RESIDENT SYSTEM PROGRAM
• Station Class Data (CM12, 13)
The following data is assigned on a per station basis.
Table 4-3  Station Class Data: Initial Data
CM10 CM12
STATION No.
TRUNK No.
CARD No.
(1–5 DIGITS)YY
00 01 02 03 04 05 07 12 13 16
0
2DAY NI GHT A B
00
1500
630/100
15x
xxxx00
15D000
D255x
xxxx 1
81
800
1500
15
31 1 15151501115
200 3 1 1 15 15 15 01 1 15
201 3 1 1 15 15 15 01 1 15
202 3 1 1 15 15 15 01 1 15
456
: Initial...

ND-45669 (E) CHAPTER 4
Page 415
Revision 2.0
RESIDENT SYSTEM PROGRAM
• Number Plan (CM20)
The following data is assigned for access code of each service feature.
Table 4-4  Numbering Plan
CM20
Y (0–3) ACCESS CODE SETTING DATA SERVICE FEATURES
0 0 800 Operator Call
11 046 Call Hold
2, 3 or 4 803 First Digit of Three Digit Station Number
50 A30 Internal Zone Paging Group 0
For calling 51 A31 Group 1
52 A32 Group 2
53 A33 Group 3
54 A34 Group 4
55 A38 Internal Zone Paging Group 0
For answering 56 A39 Group...

CHAPTER 4 ND-45669 (E)
Pag e 4 16
Revision 2.0
RESIDENT SYSTEM PROGRAM
0 9 100 Trunk Access Code RT00
81 101 RT01
82 102 RT02
83 104 RT04
84 105 RT05
85 106 RT06
86 107 RT07
87 081 Individual Trunk Access
*1 004 Trunk Queuing – Outgoing Set
#1 005 /Call Back Cancel
*2 007 Camp-On by Station (Transfer Method)
#2 A25 Camp-On by Station (Call Waiting Method)
*4 006 Executive Override
*5 010 Call Forwarding – All Calls Entry
#5 011 Cancel
*6 012 Call Forwarding – No Answer Entry
#6 013 /Busy Line Cancel
*7...

ND-45669 (E) CHAPTER 4
Page 417
Revision 2.0
RESIDENT SYSTEM PROGRAM
• Trunk Data (CM30)
The following data is assigned according to the type of trunk card.
Table 4-5  Trunk Data
:  Initial Data
CM30
TYPE OF 
TRUNK 
CARDYY
00 01 02 03 04 05 07 08 09 13 14 15
00
6300
6300
3100
31X
XXXX
EBXXXX
XXXX
EBXXX000
0290/100
6200
1500
1500
15
01 31 31 1 15 15 15
PN-4COT 00 01 02 02 NONE NONE 1 NONE 15 15 15
PN-2ODT 02 01 31 31 NONE NONE 1 NONE 15 15 15