Home > NEC > Communications System > NEC Neax 2400 Ipx Wireless System Manual

NEC Neax 2400 Ipx Wireless System Manual

Here you can view all the pages of manual NEC Neax 2400 Ipx Wireless System Manual. The NEC manuals for Communications System are available online for free. You can easily download all the documents as PDF.

Page 301

CHAPTER 5 NDA-24301
Pag e 2 84
Revision 1.0
APSP  : Assignment of Trunk Line Appearance for DM
1. GENERAL
This command is used to assign/delete the “COT trunk seizure” data, when a PS makes a call via this trunk and
an LC (made cross connection with the COT) of the existing PBX with no wireless feature.
2. PRECAUTIONS
1. Assign the physical PS station number for the “PS STN” input data.
2. This command data must be assigned to each COT circuit, that is provided with the physical cross
connection with an...

Page 302

NDA-24301 CHAPTER 5
Page 285
Revision 1.0
4. DATA SHEET
COT Trunk Seizure Data Assignment Sheet
TENANT
(TN)PS STATION NUMBER
(PS STN)ROUTE NUMBER
(RT)
1 - 255TRUNK NUMBER
(TK)
1 - 255 

Page 303

CHAPTER 5 NDA-24301
Pag e 2 86
Revision 1.0
AZDL  : ZT Program Download
1. GENERAL
This command is used to download ZT program from “Program Master ZT” to “Program Download ZT”.
2. PRECAUTIONS
1. This feature is available for Series 7300 or later software.
2. For detailed information on ZT program Download service.
3. DATA ENTRY INSTRUCTIONS
PROGRAM MASTER ZT PCN : PHS Community Number of rogram Master ZT: 1-1024
PROGRAM MASTER ZT CRN : Calling Area Number of Program Master ZT: 1-32
PROGRAM MASTER ZT GRN...

Page 304

NDA-24301 CHAPTER 5
Page 287
Revision 1.0
4. DATA SHEET
ZT Program Download Data Sheet 
PROGRAM
MASTER
ZT PCN
1-1024PROGRAM
MASTER
ZT CRN
1-32PROGRAM
MASTER
ZT GRN
1-8PROGRAM
MASTER
ZT
CSN/ZTN
1-32PROGRAM
DOWNLOAD
ZT PCN
1-1024PROGRAM
DOWNLOAD
ZT CRN
1-32PROGRAM
DOWNLOAD
ZT GRN
1-8PROGRAM
DOWNLOAD
ZT
CSN/ZTN
1-32 

Page 305

CHAPTER 5 NDA-24301
Pag e 2 88
Revision 1.0
AHLG  : Assignment of CFT Hot Line Group
1. GENERAL
This command is used to assign, delete and display the DM data which is concerned with PCS Calling
Conference Group.
List Up Command: LHLG
2. PRECAUTIONS
1. This command is available for Series 7400 or later software.
2. “Set” key and “Del” key can be used after TN and ACC are entered and then this data is read by pressing
“Get” key.
If this data is not programmed, press “Get” key again, PORT, TYPE, D_TN,...

Page 306

NDA-24301 CHAPTER 5
Page 289
Revision 1.0
4. DATA SHEET
TENANT
NUMBER
(TN)STATION NUMBER OF CFTB H/L 
ACCESS CODE
(ACC)
Max. 5 digits
PORTKIND OF STN 
(TYPE)
0~2TENANT
NUMBER OF 
DESTINATION 
(D_TN)STATION NUMBER OF
DESTINATION
(D_STN)
Max. 5 digitsSPEED CALLING
DIAL NUMBER
(D_ADC)
Max. 4 digits
1
2
3
4
5
6
7
TENANT
NUMBER
(TN)STATION NUMBER OF CFTB H/L 
ACCESS CODE
(ACC)
Max. 5 digits
PORTKIND OF STN 
(TYPE)
0~2TENANT
NUMBER OF 
DESTINATION 
(D_TN)STATION NUMBER OF
DESTINATION
(D_STN)
Max. 5 digitsSPEED...

Page 307

CHAPTER 5 NDA-24301
Pag e 2 90
Revision 1.0
AHLGL  : Assignment of CFT Hot Line Group for LDM
1. GENERAL
This command is used to assign, delete and display the LDM data which is concerned with PCS Calling
Conference Group.
List Up Command: LHLGL
2. PRECAUTIONS
1. This command is available for Series 7400 or later software.
2. This command is used for the Local Node (LN).
3. “Set” key and “Del” key can be used after UGN and TELN are entered and then this data is read by pressing
“Get key”.
If this data is...

Page 308

NDA-24301 CHAPTER 5
Page 291
Revision 1.0
4. DATA SHEET
USER GROUP
NUMBER
(UGN)TELEPHONE NUMBER OF CFTB H/L 
ACCESS CODE
(TELN)
Max. 16 digitsRINGING STOP AFTER NO 
ANSWER TIMER
(DA) 0/1
PORTKIND OF STN 
(TYPE)
0~2USER GROUP
NUMBER OF 
DESTINATION 
(D_UGN)TELEPHONE NUMBER 
OF DESTINATION 
(D_TELN)
Max. 16 digitsSPEED CALLING
DIAL NUMBER
(D_ADC)
Max. 4 digits
1
2
3
4
5
6
7
USER GROUP
NUMBER
(UGN)TELEPHONE NUMBER OF CFTB H/L 
ACCESS CODE
(TELN)
Max. 16 digitsRINGING STOP AFTER NO 
ANSWER TIMER
(DA) 0/1...

Page 309

CHAPTER 5 NDA-24301
Pag e 2 92
Revision 1.0
AHLGN  : Assignment of CFT Hot Line Group for NDM
1. GENERAL
This command is used to assign, delete and display the NDM data which is concerned with PCS Calling
Conference Group.
List Up Command: LHLGL
2. PRECAUTIONS
1. This command is available for Series 7400 or later software.
2. This command is used for the Network Control Node (NCN).
3. “Set” key and “Del” key can be used after UGN and TELN are entered and then this data is read by pressing
“Get key”. If...

Page 310

NDA-24301 CHAPTER 5
Page 293
Revision 1.0
4. DATA SHEET
USER GROUP
NUMBER
(UGN)TELEPHONE NUMBER OF CFTB H/L 
ACCESS CODE
(TELN)
Max. 16 digitsRINGING STOP AFTER NO 
ANSWER TIMER
(DA) 0/1
PORTKIND OF STN 
(TYPE)
0~2USER GROUP
NUMBER OF 
DESTINATION 
(D_UGN)TELEPHONE NUMBER 
OF DESTINATION 
(D_TELN)
Max. 16 digitsSPEED CALLING
DIAL NUMBER
(D_ADC)
Max. 4 digits
1
2
3
4
5
6
7
USER GROUP
NUMBER
(UGN)TELEPHONE NUMBER OF CFTB H/L 
ACCESS CODE
(TELN)
Max. 16 digitsRINGING STOP AFTER NO 
ANSWER TIMER
(DA) 0/1...
Start reading NEC Neax 2400 Ipx Wireless System Manual

Related Manuals for NEC Neax 2400 Ipx Wireless System Manual

All NEC manuals