NEC Neax 2400 Ipx Wireless System Manual

CHAPTER 5 NDA-24301
Pag e 2 94
Revision 1.0
2. COMMANDS FOR OPERATION AND MAINTENANCE
[Contents of Command Description]
Each command is explained dividing into the following parts.
 Command Name
Explained here are the command names to be entered via the keyboard and its full command names.
 General
General functions of each command are explained.
 Precaution
Cautions to be made when using each command are explained.
 Parameters
Parameters (data) assigned by each command are shown.
 How to Use
Usage...

NDA-24301 CHAPTER 5
Page 295
Revision 1.0
ATRF  : Assignment of Traffic Measurement Order
1. GENERAL
This command is used to assign and delete traffic measurement programs. A request for traffic measurement is
performed when a traffic measurement instruction has been assigned by this command. The collected traffic
measurement data can be output from the MAT printer or stored on the HD of the MAT, which can be designated
on the basis of traffic measurement type.
2. PRECAUTIONS
None
3. PARAMETERS
Input...

CHAPTER 5 NDA-24301
Pag e 2 96
Revision 1.0
AZARL  : Assignment of ZT Area Information for Local Data Memory
1. GENERAL
This command is used to assign and delete the Zone Transceiver Area information in the Local Node (LN).
2. PRECAUTIONS
1. This command is used for the Local Node.
2. All PSs data must be re-download, if control carrier data is changed via this command.
3. The parameters, WTZNSL, WTZNKL, RCHOOL, RCHOSL, RCHFE, CCHGFE, should not be changed
from default setting.
4. ZT must be restarted...

NDA-24301 CHAPTER 5
Page 297
Revision 1.0
AZARN  : Assignment of ZT Area Information for Network Data Memory
1. GENERAL
This command is used to assign and delete the Zone Transceiver Area information in the Network Control Node
(NCN).
2. PRECAUTIONS
1. This command is used for the Network Control Node.
2. All PSs data must be re-download, if control carrier data is changed via this command.
3. The parameters, WTZNSL, WTZNKL, RCHOOL, RCHOSL, RCHFE, CCHGFE, should not be changed
from default setting.
4. ZT...

CHAPTER 5 NDA-24301
Pag e 2 98
Revision 1.0
COCS1L  : Control of CS/ZT Status Read for Local Data Memory
1. GENERAL
This command is used to read the status of the CS/ZT in the Local Node (LN).
2. PRECAUTIONS
This command is used for the Local Node.
3. DATA ENTRY INSTRUCTIONS
PCN (PHS COMMUNITY NUMBER) : 1-1024
ERN (CALLING AREA NUMBER) : 1-32
GRN (GROUP NUMBER) : 1-8
CSN (CS/ZT NUMBER) : 1-32
After the assignment data is processed between PBX and MAT; following parameter is automatically
assigned
LENS...

NDA-24301 CHAPTER 5
Page 299
Revision 1.0
COCS1N  : Control of CS/ZT Status Read for Network Data Memory
1. GENERAL
This command is used to read the status of the CS/ZT status read in the Network Control Node (NCN).
2. PRECAUTIONS
This command is used for the Network Control Node.
3. DATA ENTRY INSTRUCTIONS
PCN (PHS COMMUNITY NUMBER) : 1-1024
ERN (CALLING AREA NUMBER) : 1-32
GRN (GROUP NUMBER) : 1-8
CSN (CS/ZT NUMBER) : 1-32
After the assignment data is processed between PBX and MAT; following parameter...

CHAPTER 5 NDA-24301
Pag e 3 00
Revision 1.0
COCS2L  : Change of CS/ZT Operation Parameter for Local Data Memory
1. GENERAL
This command is used to change the CS/ZT operation parameter in the Local Node (LN).
2. PRECAUTIONS
This command is used for the Local Node.
3. DATA ENTRY INSTRUCTIONS
PCN (PHS COMMUNITY NUMBER) : 1-1024
ERN (CALLING AREA NUMBER) : 1-32
MODE (GLOBAL DEFINITION : 1: NOR (Normal)
INFORMATION PATTERN NUMBER) 2: HBY (Heavy)
ZONE (ZONE KIND) : 1: LG (Large)
2: SM (Small)
PAS (POSITION...

NDA-24301 CHAPTER 5
Page 301
Revision 1.0
COCS2N  : Change of CS/ZT Operation Parameter for Network Data Memory
1. GENERAL
This command is used to change the CS/ZT operation parameter in the Network Control Node (NCN).
2. PRECAUTIONS
This command is used for the Network Data Node.
3. DATA ENTRY INSTRUCTIONS
PCN (PHS COMMUNITY NUMBER) : 1-1024
ERN (CALLING AREA NUMBER) : 1-32
MODE (GLOBAL DEFINITION : 1: NOR (Normal)
INFORMATION PATTERN NUMBER) 2: HBY (Heavy)
ZONE (ZONE KIND) : 1: LG (Large)
2: SM...

CHAPTER 5 NDA-24301
Pag e 3 02
Revision 1.0
COCS3L  : Change of CS/ZT Reset for Local Data Memory
1. GENERAL
This command is used to control CS/ZT Reset for the Local Node (LN).
2. PRECAUTIONS
This command is used for the Local Node.
3. DATA ENTRY INSTRUCTIONS
PCN (PHS COMMUNITY NUMBER) : 1-1024
ERN (CALLING AREA NUMBER) : 1-32
GRN (GROUP NUMBER) : 1-8
CSN (CS/ZT NUMBER) : 1-32
  After the assignment data is processed between PBX and MAT; following parameter is automatically
assigned
TN (TENANT NUMBER) :...

NDA-24301 CHAPTER 5
Page 303
Revision 1.0
COCS3N  : Control of CS/ZT Reset for Network Data Memory
1. GENERAL
This command is used to control CS/ZT Reset for the Local Node (LN).
2. PRECAUTIONS
This command is used for the Network Control Node.
3. DATA ENTRY INSTRUCTIONS
PCN (PHS COMMUNITY NUMBER) : 1-1024
ERN (CALLING AREA NUMBER) : 1-32
GRN (GROUP NUMBER) : 1-8
CSN (CS/ZT NUMBER) : 1-32
 After the assignment data is processed between PBX and MAT; following parameters are automatically
assigned
TN...