NEC Neax 2400 Ipx Office Data Specification

NDA-24298 CHAPTER 4
Page 117
Issue 1
ASYD : Assignment of System Data
1146
b0Howler Tone Timer:
Miscellaneous Timer Counter (MTC) is to 
be assigned a value from 0 Hex to F Hex 
(0-15).This timer assigns 
the duration 
between tones when 
Howler Tone is 
being sent to a 
station.
Timer Value Setting 
is MTC 
× TC. 
The Interval Pattern 
is assigned in 
INDEX 64, b
3 and 
b
4
Note:When this 
data is 00 
Hex, default 
data is 
automatically 
set to 30 sec.
b1
b2
b3
b4Timer Class (TC) is to be assigned one...

CHAPTER 4 NDA-24298
Page 118
Issue 1
ASYD : Assignment of System Data
1149
b0Camp-On Recall Timer for CAS-Satellite 
Station:
Miscellaneous Timer Counter (MTC) is to 
be assigned a value from 0 Hex to F Hex 
(0-15).The duration for 
which a call will 
remain Camped-On 
to a station at the 
Satellite PBX before 
being recalled to the 
attendant.
Timer Value Setting 
is MTC 
× TC sec.
Note:When this 
data is 00 
Hex, default 
data is 
automatically 
set to 30-32 
sec.
b1
b2
b3
b4Timer Class (TC) is to be...

NDA-24298 CHAPTER 4
Page 119
Issue 1
ASYD : Assignment of System Data
1151
b0SHF length for a CAS Main Station:
Miscellaneous Timer Counter (MTC) is to 
be assigned a value from 00 Hex to 1F Hex 
(0-31).The length of an 
SHF signal being 
sent from the Main 
to a Satellite PBX.
Timer Value Setting 
is MTC 
× 32 msec. 
(MTC+1) 
× 32 
msec.
Note:When this 
data is 00 
Hex, default 
data is 
automatically 
set from 448 
msec.-480 
msec.
b1
b2
b3
b4
b5
Not usedb6
b7
152
b0Interval for Call Waiting Indication...

CHAPTER 4 NDA-24298
Page 120
Issue 1
ASYD : Assignment of System Data
1153
b0Data Communication RS-232C RS-CS 
Signal Control service:
This timer is to be assigned a value from 0 
Hex to F Hex (0-15)
0 Hex = 60 msec.
1-7 Hex =–
8 Hex = 0 msec.
9 Hex = 30 msec.
A Hex = 60 msec.
B Hex = 120 msec.
C Hex = 240 msec.
D Hex = 360 msec.
E Hex = 720 msec.
F Hex = 1080 msec.RS-232C Guard 
Time after RS-ON 
until CS-ON during 
data 
communications.
Note:When this 
data is 00 
Hex, default 
data is 
automatically...

NDA-24298 CHAPTER 4
Page 121
Issue 1
ASYD : Assignment of System Data
1156
b0Trunk Soft Hold Timer A:
Miscellaneous Timer Counter (MTC) is to 
be assigned a value from 0 Hex to F Hex
(0-15).Timer Value Setting 
is MTC 
× TC sec.
Note:When this 
data is 00 
Hex, default 
data is 
automatically 
set to 30 sec.
b1
b2
b3
b4Timer Class (TC) is to be assigned one of 
the following values:
b6b5b4b6b5b4
0 00=–100=–
0 01=–101=–
0 10=–110=–
0 11=2 sec.111=–
b5
b6
0b7Not used
157
b0Trunk Soft Hold Timer B:...

CHAPTER 4 NDA-24298
Page 122
Issue 1
ASYD : Assignment of System Data
1158
b0Attendant Console Busy Verification 
Warning Tone Timer:
Miscellaneous Timer Counter (MTC) is to 
be assigned a value from 0 Hex to F Hex 
(0-15).
The interval between 
BV tones.
Timer Value Setting 
is MTC 
× TC sec.
Note:When this 
data is 00 
Hex, default 
data is 
automatically 
set to 14 sec.
b1
b2
b3
b4Timer Class (TC) is to be assigned one of 
the following values:
b6b5b4b6b5b4
0 00=–100=–
0 01=–101=–
0 10=–110=–
0 11=2...

NDA-24298 CHAPTER 4
Page 123
Issue 1
ASYD : Assignment of System Data
11601b
0Hotel Feature required (Fixed Data)
(for Hotel system) 1b
1Hotel Service kind (Fixed Data)
b
2
Length of Room Status Memory
0/1 = 8 byte/24 byte
0b
3Pattern of Key Arrangement on Attendant 
Console
(Refer to Table 4-1.) (Usually, 00) 0b
4
b5Guest Name Service 0/1 = Out/In Service
b
6
Numbering Plan Data Table of Guest 
Station and Admin. Stations
0/1 = Separate/Common
Note 1:If data is assigned as 1, only use
commands AANP and...

CHAPTER 4 NDA-24298
Page 124
Issue 1
ASYD : Assignment of System Data
1161b
0
Don’t Disturb Override key on the 
Attendant Console
0/1 = Out/In Service
(for Hotel system) b
1
Message Waiting Service
0/1 = Out/In Service
b
2
Language Service
0/1 = Out/In Service
b
3
Split Hold Service
0/1 = Out/In Service
0b
4Not used
b
5
DSS (Direct Station Select) Key on the 
Attendant Console
0/1 = Ineffective/Effective
b
6
Timing Start using “#” Code
0/1 = Ineffective/Effective
Note 1:This data is available in both...

NDA-24298 CHAPTER 4
Page 125
Issue 1
ASYD : Assignment of System Data
Table 4-1 Key Arrangements for Hotel Add-On Console
DATA
KEY ARRANGEMENT REMARKS
b
4b3
00WUS: Wake-Up Set
WUR: Wake-Up Reset
DDS: Do Not Disturb Set
DDR: Do Not Disturb Reset
MWS: Message Waiting Set
MWR: Message Waiting Reset
RCS: Room Cut Off Set
RCR: Room Cut Off Reset
AUD: Audit Report
STS: Status Check
C/I: Check In
C/O: Check Out
SCS: Boss-Secretary Set
SCR: Boss-Secretary Reset
COC: Manual Switching of C.O. Incom-
ing Call 01...

CHAPTER 4 NDA-24298
Page 126
Issue 1
ASYD : Assignment of System Data
SYSTEM
DATA
TYPE
(SYS)SYSTEM
DATA
INDEX
(INDEX)
0 - 511DATA
(DATA)
00 - FF
(Hex.)BIT
CORRESPONDING
DATA
SYSTEM DATA CONTENTS
DATAea
0/1BIT
11620
b0
Assign 00 for business 
systems. 0
b1
0b2
0b3
0b4
0b5
0b6
0b7
1630
b0
Assign 00 for business 
systems. 0
b1
0b2
0b3
0b4
0b5
0b6
0b7
164 000
b0
0b1
0b2
0b3
0b4
0b5
0b6
0b7
165 000
b0
0b1
0b2
0b3
0b4
0b5
0b6
0b7