NEC Neax 2400 Imx Wireless System Manual

CHAPTER 5 ND-70290 (E)
Pag e 2 94
Revision 3.0
AZARL
AZARL  : Assignment of ZT Area Information for Local Data Memory
1. GENERAL
This command is used to assign and delete the Zone Transceiver Area information in the Local Node (LN).
2. PRECAUTIONS
1. This command is used for the Local Node.
2. All PSs data must be re-download, if control carrier data is changed via this command.
3. The parameters, WTZNSL, WTZNKL, RCHOOL, RCHOSL, RCHFE, CCHGFE, should not be changed
from default setting.
4. ZT must be...

ND-70290 (E) CHAPTER 5
Page 295
Revision 3.0
AZARN
AZARN  : Assignment of ZT Area Information for Network Data Memory
1. GENERAL
This command is used to assign and delete the Zone Transceiver Area information in the Network Control Node
(NCN).
2. PRECAUTIONS
1. This command is used for the Network Control Node.
2. All PSs data must be re-download, if control carrier data is changed via this command.
3. The parameters, WTZNSL, WTZNKL, RCHOOL, RCHOSL, RCHFE, CCHGFE, should not be changed
from default...

CHAPTER 5 ND-70290 (E)
Pag e 2 96
Revision 3.0
COCS1L
COCS1L  : Control of CS/ZT Status Read for Local Data Memory
1. GENERAL
This command is used to read the status of the CS/ZT in the Local Node (LN).
2. PRECAUTIONS
This command is used for the Local Node.
3. DATA ENTRY INSTRUCTIONS
PCN (PHS COMMUNITY NUMBER) : 1-1024
ERN (CALLING AREA NUMBER) : 1-32
GRN (GROUP NUMBER) : 1-8
CSN (CS/ZT NUMBER) : 1-32
After the assignment data is processed between PBX and MAT; following parameter is automatically...

ND-70290 (E) CHAPTER 5
Page 297
Revision 3.0
COCS1N
COCS1N  : Control of CS/ZT Status Read for Network Data Memory
1. GENERAL
This command is used to read the status of the CS/ZT status read in the Network Control Node (NCN).
2. PRECAUTIONS
This command is used for the Network Control Node.
3. DATA ENTRY INSTRUCTIONS
PCN (PHS COMMUNITY NUMBER) : 1-1024
ERN (CALLING AREA NUMBER) : 1-32
GRN (GROUP NUMBER) : 1-8
CSN (CS/ZT NUMBER) : 1-32
After the assignment data is processed between PBX and MAT; following...

CHAPTER 5 ND-70290 (E)
Pag e 2 98
Revision 3.0
COCS2L
COCS2L  : Change of CS/ZT Operation Parameter for Local Data Memory
1. GENERAL
This command is used to change the CS/ZT operation parameter in the Local Node (LN).
2. PRECAUTIONS
This command is used for the Local Node.
3. DATA ENTRY INSTRUCTIONS
PCN (PHS COMMUNITY NUMBER) : 1-1024
ERN (CALLING AREA NUMBER) : 1-32
MODE (GLOBAL DEFINITION : 1: NOR (Normal)
INFORMATION PATTERN NUMBER) 2: HBY (Heavy)
ZONE (ZONE KIND) : 1: LG (Large)
2: SM (Small)
PAS...

ND-70290 (E) CHAPTER 5
Page 299
Revision 3.0
COCS2N
COCS2N  : Change of CS/ZT Operation Parameter for Network Data Memory
1. GENERAL
This command is used to change the CS/ZT operation parameter in the Network Control Node (NCN).
2. PRECAUTIONS
This command is used for the Network Data Node.
3. DATA ENTRY INSTRUCTIONS
PCN (PHS COMMUNITY NUMBER) : 1-1024
ERN (CALLING AREA NUMBER) : 1-32
MODE (GLOBAL DEFINITION : 1: NOR (Normal)
INFORMATION PATTERN NUMBER) 2: HBY (Heavy)
ZONE (ZONE KIND) : 1: LG (Large)
2:...

CHAPTER 5 ND-70290 (E)
Pag e 3 00
Revision 3.0
COCS3L
COCS3L  : Change of CS/ZT Reset for Local Data Memory
1. GENERAL
This command is used to control CS/ZT Reset for the Local Node (LN).
2. PRECAUTIONS
This command is used for the Local Node.
3. DATA ENTRY INSTRUCTIONS
PCN (PHS COMMUNITY NUMBER) : 1-1024
ERN (CALLING AREA NUMBER) : 1-32
GRN (GROUP NUMBER) : 1-8
CSN (CS/ZT NUMBER) : 1-32
  After the assignment data is processed between PBX and MAT; following parameter is automatically
assigned
TN (TENANT...

ND-70290 (E) CHAPTER 5
Page 301
Revision 3.0
COCS3N
COCS3N  : Control of CS/ZT Reset for Network Data Memory
1. GENERAL
This command is used to control CS/ZT Reset for the Local Node (LN).
2. PRECAUTIONS
This command is used for the Network Control Node.
3. DATA ENTRY INSTRUCTIONS
PCN (PHS COMMUNITY NUMBER) : 1-1024
ERN (CALLING AREA NUMBER) : 1-32
GRN (GROUP NUMBER) : 1-8
CSN (CS/ZT NUMBER) : 1-32
 After the assignment data is processed between PBX and MAT; following parameters are automatically...

CHAPTER 5 ND-70290 (E)
Pag e 3 02
Revision 3.0
DLIN
DLIN  : Display of a List of Roaming PS
1. GENERAL
This command is used to display/delete a list of data related to the Roaming PS that is available on the Home
Location Register (HLR) or Visitor Location Register (VLR).
2. PRECAUTIONS
None
3. DATA ENTRY INSTRUCTION
FUNK (FUNCTION NUMBER) : 1 = PS – Moving to another PBX (HLR Display)
2 = PS – Moving from another PBX (VLR Display)
CNT (DELETION NUMBER) : Used to delete the currently Roaming PS data,...

ND-70290 (E) CHAPTER 5
Page 303
Revision 3.0
DPSN
DPSN  : Display of PS Station Data
1. GENERAL
This command is used to display the PS station data. The display appears when the Tenant Number and Physical
Station/Telephone Number are entered. This command can also be used to display information on Hot Line
station, details on PS data, Call Pickup Group data, Station Hunting data and Uniform Call Distribution (UCD)
data.
2. PRECAUTIONS
Station Hunting data and Uniform Call Distribution (UCD) data are...