NEC Neax 2400 Imx Wireless System Manual

CHAPTER 5 ND-70290 (E)
Pag e 2 74
Revision 3.0
ANSDN
4. DATA SHEET
Number sharing Data Assignment Sheet (1/2)
MAIN USER
GROUP
NUMBER
(M-UGN)SUB USER
GROUP
NUMBER
(S-UGN)MAIN
TELEPHONE
NUMBER
(M-TELN)
MAX. 16 DIGITSSUB
TELEPHONE
NUMBER
(S-TELN)
MAX. 16 DIGITS 

ND-70290 (E) CHAPTER 5
Page 275
Revision 3.0
ANSDN
Number sharing Data Assignment Sheet (2/2)
OUTPUT
EXTERNAL
EQUIPMENT
(OD)
0/1MESSAGE
WAITING
CONTROL
(MW)
0/1TELEPHONE
EQUIPMENT
NUMBER
(INDEX)
1-65535REMARKS 

CHAPTER 5 ND-70290 (E)
Pag e 2 76
Revision 3.0
APMD
APMD  : Assignment of Trunk Line Appearance Maximum Necessary Digit for DM
1. GENERAL
This command is used to assign/delete the maximum necessary digits (MND) data, associated with a PS call to
be originated by dialing an area/office code of the “existing PBX with no wireless function”. 
2. PRECAUTIONS
None
3. DATA ENTRY INSTRUCTION
TENANT 
    (TN)DESTINATION CODE 
             (DC) 
     MAX: 10  digits
 
  MAXIMUM  
NECESSARY  
     DIGITS 
 (MND)...

ND-70290 (E) CHAPTER 5
Page 277
Revision 3.0
APMD
4. DATA SHEET
Maximum Necessary Digit Data Assignment Sheet
TENANT
(TN)DESTINATION CODE
(DC)
MAX: 10 digitsMAXIMUM NECESSARY 
DIGITS (MND)
1 - 24 

CHAPTER 5 ND-70290 (E)
Pag e 2 78
Revision 3.0
APMLL
APMLL  : Assignment of PS Multiline Data for Local Data Memory
1. GENERAL
This command is used to assign and delete My line and Sub Line data for Two-Line Operation.
2. PRECAUTIONS
1. This command is available for Series 7300 or later software.
2. This command is used for the Local Node.
3. For detailed information on Two-Line Operation service, see “Office Data Assignment” in Chapter 4.
3. DATA ENTRY INSTRUCTIONS
MY-UGN :PS My Line User Group Number...

ND-70290 (E) CHAPTER 5
Page 279
Revision 3.0
APMLL
4. DATA SHEET
PS Multiline Data Assignment Sheet 
PS MY LINE
USER GROUP
NUMBER
(MY-UGN)PS MY LINE
TELEPHONE
NUMBER
(MY-TLN)PS SUB LINE
USER GROUP
NUMBER
(SUB-UGN)PS SUB LINE
TELEPHONE
NUMBER
(SUB-TLN)REMARKS 

CHAPTER 5 ND-70290 (E)
Pag e 2 80
Revision 3.0
APMLN
APMLN  : Assignment of PS Multiline Data for Network Data Memory
1. GENERAL
This command is used to assign and delete My line and Sub Line data for Two-Line Operation.
2. PRECAUTIONS
1. This command is available for Series 7300 or later software.
2. This command is used for the Network Control Node.
3. For detailed information on Two-Line Operation service, see “Office Data Assignment” in Chapter 4.
3. DATA ENTRY INSTRUCTIONS
MY-UGN :PS My Line User...

ND-70290 (E) CHAPTER 5
Page 281
Revision 3.0
APMLN
4. DATA SHEET
PS Multiline Data Assignment Sheet 
PS MY LINE
USER GROUP
NUMBER
(MY-UGN)PS MY LINE
TELEPHONE
NUMBER
(MY-TLN)PS SUB LINE
USER GROUP
NUMBER
(SUB-UGN)PS SUB LINE
TELEPHONE
NUMBER
(SUB-TLN)REMARKS 

CHAPTER 5 ND-70290 (E)
Pag e 2 82
Revision 3.0
APSP
APSP  : Assignment of Trunk Line Appearance for DM
1. GENERAL
This command is used to assign/delete the “COT trunk seizure” data, when a PS makes a call via this trunk and
an LC (made cross connection with the COT) of the existing PBX with no wireless feature.
2. PRECAUTIONS
1. Assign the physical PS station number for the “PSTN” input data.
2. This command data must be assigned to each COT circuit, that is provided with the physical cross
connection...

ND-70290 (E) CHAPTER 5
Page 283
Revision 3.0
APSP
4. DATA SHEET
COT Trunk Seizure Data Assignment Sheet
TENANT
(TN)PS STATION NUMBER
(PSTN)ROUTE NUMBER
(RT)
1 - 255TRUNK NUMBER
(TK)
1 - 255