NEC Neax 2400 Imx Wireless System Manual

CHAPTER 5 ND-70290 (E)
Pag e 2 64
Revision 3.0
ALGSN
ALGSN  : Assignment of Telephone Number Data for Network Data Memory
1. GENERAL
This command is used to assign the related data of the Telephone Number (TELN) corresponding to the physical
station. The data assigned by this command is written in Network Data Memory (NDM) of the Network Control
Node (NCN), updating the NDM at each Local Node (LN). 
List Up Command : LLGSN
2. PRECAUTIONS
1. The ALGSN command is used to assign the Telephone Number (TELN)...

ND-70290 (E) CHAPTER 5
Page 265
Revision 3.0
ALGSN
3. DATA ENTRY INSTRUCTIONS
 When assigning TYPE = 1 (LENS is used to specify the Telephone number) 
When assigning TYPE = 2 (STN is used to specify the Telephone number) 
TYPE
1/2USER GROUP 
NUMBER
(UGN)TELEPHONE NUMBER (TELN)
MAX. 16 DIGITSLINE EQUIPMENT 
NUMBER 
(LENS)FUSION POINT 
CODE
(FPC)
1-253
115
11
4 0 0 0   00 0 0 0   1 1
TYPE
1 = LENS is used to specify the Telephone number
2= STN is used to specify the Telephone number
LENS
LENS of the...

CHAPTER 5 ND-70290 (E)
Pag e 2 66
Revision 3.0
ALGSN
4. DATA SHEET
 LENS is used to specify the Telephone number (TYPE = 1) 
TYPEUSER GROUP 
NUMBER 
(UGN)TELEPHONE NUMBER (TELN)
MAX. 16 DIGITSLINE EQUIPMENT 
NUMBER 
(LENS)FUSION POINT 
CODE
(FPC)
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11 

ND-70290 (E) CHAPTER 5
Page 267
Revision 3.0
ALGSN
 STN is used to specify the Telephone number (TYPE = 2)
TYPEUSER GROUP 
NUMBER (UGN)TELEPHONE NUMBER (TELN)
MAX. 16 DIGITSTENANT 
NUMBER
(TN)STATION
NUMBER(STN)REMARKS
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21 

CHAPTER 5 ND-70290 (E)
Pag e 2 68
Revision 3.0
ALRTN
ALRTN  : Assignment of Logical Route for Network Data Memory
1. GENERAL
This command is used to allocate the Logical Route Number which is the unique number of the external trunk
route in the Fusion network.
List Up Command : LLRTN
2. PRECAUTIONS
1. Logical Route Number allocation is required for the Fusion network only.
2. For more detailed information, see the “Fusion System Manual”.
3. DATA ENTRY INSTRUCTIONS
NUMBER (LGRT) LOGICAL ROUTE   FUSION...

ND-70290 (E) CHAPTER 5
Page 269
Revision 3.0
ALRTN
4. DATA SHEET
LOGICAL ROUTE
NUMBER (LGRT)
1-899FUSION POINT 
CODE (FPC)
1-253EXTERNAL 
ROUTE NUMBER 
(RT)
1-255REMARKS 

CHAPTER 5 ND-70290 (E)
Pag e 2 70
Revision 3.0
ANSDL
ANSDL  : Assignment of Number Sharing Data for Local Data Memory
1. GENERAL
This command is used to assign and delete Main Station and Sub Station data for Number Sharing service.
2. PRECAUTIONS
1. This command is available for Series 7300 or later software.
2. This command is used for the Local Node.
3. For detailed information on Number Sharing service, see “Number Sharing” in Chapter 4.
3. DATA ENTRY INSTRUCTIONS
M-UGN : Main User Group Number
S-UGN...

ND-70290 (E) CHAPTER 5
Page 271
Revision 3.0
ANSDL
4. DATA SHEET
Number sharing Data Assignment Sheet (1/2)
MAIN USER
GROUP
NUMBER
(M-UGN)SUB USER
GROUP
NUMBER
(S-UGN)MAIN
TELEPHONE
NUMBER
(M-TELN)
MAX. 16 DIGITSSUB
TELEPHONE
NUMBER
(S-TELN)
MAX. 16 DIGITS 

CHAPTER 5 ND-70290 (E)
Pag e 2 72
Revision 3.0
ANSDL
Number sharing Data Assignment Sheet (2/2)
OUTPUT
EXTERNAL
EQUIPMENT
(OD)
0/1MESSAGE
WAITING
CONTROL
(MW)
0/1TELEPHONE
EQUIPMENT
NUMBER
(INDEX)
1-65535REMARKS 

ND-70290 (E) CHAPTER 5
Page 273
Revision 3.0
ANSDN
ANSDN  : Assignment of Number Sharing Data for Network Data Memory
1. GENERAL
This command is used to assign and delete Main Station and Sub Station data for Number Sharing service.
2. PRECAUTIONS
1. This command is available for Series 7300 or later software.
2. This command is used for the Network Control Node.
3. For detailed information on Number Sharing service, see “Number Sharing” in Chapter 4.
3. DATA ENTRY INSTRUCTIONS
M-UGN : Main User Group...