NEC Neax 2400 Imx Wireless System Manual

CHAPTER 5 ND-70290 (E)
Pag e 2 84
Revision 3.0
AZDL
AZDL  : ZT Program Download
1. GENERAL
This command is used to download ZT program from “Program Master ZT” to “Program Download ZT”.
2. PRECAUTIONS
1. This feature is available for Series 7300 or later software.
2. For detailed information on ZT program Download service.
3. DATA ENTRY INSTRUCTIONS
PROGRAM MASTER ZT PCN : PHS Community Number of rogram Master ZT: 1-1024
PROGRAM MASTER ZT CRN : Calling Area Number of Program Master ZT: 1-32
PROGRAM...

ND-70290 (E) CHAPTER 5
Page 285
Revision 3.0
AZDL
4. DATA SHEET
ZT Program Download Data Sheet 
PROGRAM
MASTER
ZT PCN
1-1024PROGRAM
MASTER
ZT CRN
1-32PROGRAM
MASTER
ZT GRN
1-8PROGRAM
MASTER
ZT
CSN/ZTN
1-32PROGRAM
DOWNLOAD
ZT PCN
1-1024PROGRAM
DOWNLOAD
ZT CRN
1-32PROGRAM
DOWNLOAD
ZT GRN
1-8PROGRAM
DOWNLOAD
ZT
CSN/ZTN
1-32 

CHAPTER 5 ND-70290 (E)
Pag e 2 86
Revision 3.0
AHLG
AHLG  : Assignment of CFT Hot Line Group
1. GENERAL
This command is used to assign, delete and display the DM data which is concerned with PCS Calling
Conference Group.
List Up Command: LHLG
2. PRECAUTIONS
1. This command is available for Series 7400 or later software.
2. “Set” key and “Del” key can be used after TN and ACC are entered and then this data is read by pressing
“Get” key.
If this data is not programmed, press “Get” key again, PORT, TYPE,...

ND-70290 (E) CHAPTER 5
Page 287
Revision 3.0
AHLG
4. DATA SHEET
TENANT
NUMBER
(TN)STATION NUMBER OF CFTB H/L 
ACCESS CODE
(ACC)
Max. 5 digits
PORTKIND OF STN 
(TYPE)
0~2TENANT
NUMBER OF 
DESTINATION 
(D_TN)STATION NUMBER OF
DESTINATION
(D_STN)
Max. 5 digitsSPEED CALLING
DIAL NUMBER
(D_ADC)
Max. 4 digits
1
2
3
4
5
6
7
TENANT
NUMBER
(TN)STATION NUMBER OF CFTB H/L 
ACCESS CODE
(ACC)
Max. 5 digits
PORTKIND OF STN 
(TYPE)
0~2TENANT
NUMBER OF 
DESTINATION 
(D_TN)STATION NUMBER OF
DESTINATION
(D_STN)
Max. 5...

CHAPTER 5 ND-70290 (E)
Pag e 2 88
Revision 3.0
AHLGL
AHLGL  : Assignment of CFT Hot Line Group for LDM
1. GENERAL
This command is used to assign, delete and display the LDM data which is concerned with PCS Calling
Conference Group.
List Up Command: LHLGL
2. PRECAUTIONS
1. This command is available for Series 7400 or later software.
2. This command is used for the Local Node (LN).
3. “Set” key and “Del” key can be used after UGN and TELN are entered and then this data is read by pressing
“Get key”.
If...

ND-70290 (E) CHAPTER 5
Page 289
Revision 3.0
AHLGL
4. DATA SHEET
USER GROUP
NUMBER
(UGN)TELEPHONE NUMBER OF CFTB H/L 
ACCESS CODE
(TELN)
Max. 16 digitsRINGING STOP AFTER NO 
ANSWER TIMER
(DA) 0/1
PORTKIND OF STN 
(TYPE)
0~2USER GROUP
NUMBER OF 
DESTINATION 
(D_UGN)TELEPHONE NUMBER 
OF DESTINATION 
(D_TELN)
Max. 16 digitsSPEED CALLING
DIAL NUMBER
(D_ADC)
Max. 4 digits
1
2
3
4
5
6
7
USER GROUP
NUMBER
(UGN)TELEPHONE NUMBER OF CFTB H/L 
ACCESS CODE
(TELN)
Max. 16 digitsRINGING STOP AFTER NO 
ANSWER TIMER...

CHAPTER 5 ND-70290 (E)
Pag e 2 90
Revision 3.0
AHLGN
AHLGN  : Assignment of CFT Hot Line Group for NDM
1. GENERAL
This command is used to assign, delete and display the NDM data which is concerned with PCS Calling
Conference Group.
List Up Command: LHLGL
2. PRECAUTIONS
1. This command is available for Series 7400 or later software.
2. This command is used for the Network Control Node (NCN).
3. “Set” key and “Del” key can be used after UGN and TELN are entered and then this data is read by pressing
“Get...

ND-70290 (E) CHAPTER 5
Page 291
Revision 3.0
AHLGN
4. DATA SHEET
USER GROUP
NUMBER
(UGN)TELEPHONE NUMBER OF CFTB H/L 
ACCESS CODE
(TELN)
Max. 16 digitsRINGING STOP AFTER NO 
ANSWER TIMER
(DA) 0/1
PORTKIND OF STN 
(TYPE)
0~2USER GROUP
NUMBER OF 
DESTINATION 
(D_UGN)TELEPHONE NUMBER 
OF DESTINATION 
(D_TELN)
Max. 16 digitsSPEED CALLING
DIAL NUMBER
(D_ADC)
Max. 4 digits
1
2
3
4
5
6
7
USER GROUP
NUMBER
(UGN)TELEPHONE NUMBER OF CFTB H/L 
ACCESS CODE
(TELN)
Max. 16 digitsRINGING STOP AFTER NO 
ANSWER TIMER...

CHAPTER 5 ND-70290 (E)
Pag e 2 92
Revision 3.0
COMMANDS
2. COMMANDS FOR OPERATION AND MAINTENANCE
[Contents of Command Description]
Each command is explained dividing into the following parts.
 Command Name
Explained here are the command names to be entered via the keyboard and its full command names.
 General
General functions of each command are explained.
 Precaution
Cautions to be made when using each command are explained.
 Parameters
Parameters (data) assigned by each command are shown.
 How...

ND-70290 (E) CHAPTER 5
Page 293
Revision 3.0
AT R F
ATRF  : Assignment of Traffic Measurement Order
1. GENERAL
This command is used to assign and delete traffic measurement programs. A request for traffic measurement is
performed when a traffic measurement instruction has been assigned by this command. The collected traffic
measurement data can be output from the MAT printer or stored on the HD of the MAT, which can be designated
on the basis of traffic measurement type.
2. PRECAUTIONS
None
3....