NEC Neax 2400 Imx Oai System Manual
Have a look at the manual NEC Neax 2400 Imx Oai System Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
ND-70895 (E) CHAPTER 4 Page 31 Revision 1.0 COMMANDS ACNO ACNO: Assignment of Conversion Number Data 5. Functions This command is used to assign/delete the conversion number required for selecting a route on a each route basis. 6. Precaution (a) The data should be assigned to ring-down trunks. (b) As a conversion number, a monitor number assigned by AMNO command should be set. 7. Parameters RT : External Route Number TN : Tenant Number of Monitored Number MNO : Monitored Number (Max. 5 digits) Note Note: Max. 6 digits when using in a hotel system 8. Related Commands Monitored Number Assignment: AMNO – Parameter RT – Monitored Number Deletion : AMNO Assignment : ARTD List Up : LCNO Display : ARTD List Up : LRTD
CHAPTER 4 ND-70895 (E) Page 32 Revision 1.0 COMMANDS AC NO Conversion Number Data Assignment Table Note:Max. 6 digits when using in a hotel system EXTERNAL ROUTE NUMBER (RT)TENANT NUMBER OF MONITORED NUMBER (TN)MONITORED NUMBER (MNO) MAX. 5 DIGITS (Note)
ND-70895 (E) CHAPTER 4 Page 33 Revision 1.0 COMMANDS AKYD AKYD: Assignment of Key Data for Dterm 9. Functions This command is used to assign/delete/display the function key data, multi-line data or intercom data corresponding to each key on such multi-function telephone terminal as D term Series E. 10. Precaution For the details of D term data, refer to the description of AKYD command in the Feature Programming Manual and Office Data Specification for the NEAX2400 IMX. Explanations here will be limited only to the items pertaining to the OAI System. 11. Parameters FKY: Function Key (valid for KYI=1) 34= OAI Key 1 35= OAI Key 2 36= OAI Key 3 37= OAI Key 4 38= OAI Key 5 39= OAI Key 6 40= OAI Key 7 41= OAI Key 8 42= OAI Key 9 43= OAI Key 10 44= OAI Key 11 45= OAI Key 12 46= OAI Key 13 47= OAI Key 14 52= Speaker 59= Release Note:For details of other parameters, refer to the description of AKYD command in the Office Data Specification for the NEAX2400 IMX.
CHAPTER 4 ND-70895 (E) Page 34 Revision 1.0 COMMANDS AMNO AMNO: Assignment of Monitored Number 12. Functions This command is used to assign/delete Monitored Numbers. 13. Precaution Monitored Number (MON) is a number of maximum 5 digits consisting of 0 ~ 9, “*” and “#”. Note that, in the case of a hotel system, UCD Pilot Number (STN) is a number of maximum 6 digits, respectively. As NMI value, use a different value for each MON to be assigned. 14. Parameters TN : Tenant Number MNO : Monitored Number (Max. 5 digits) NMI : Monitored Number Index (1 ~ 4095) UCD : Going by UCD when monitor status is not requested from AP 0: Not going by UCD 1: Going by UCD STN : UCD Pilot Number (Max. 5 digits) Note [In the case of Hotel System] A/G : Designation of Administration/Guest Room A: For Administration G: For Guest Room Note:Maximum 6 digits when using in a hotel system 15. Related Commands List Up: LMNO
ND-70895 (E) CHAPTER 4 Page 35 Revision 1.0 COMMANDS AMNO Monitored Number Assignment Table Note 1:Max. 6 digits when using in a hotel system Note 2:Data to be entered for a hotel system Going by UCD when monitored status is not requested from AP :0/1 = Not Going By UCD/Going By UCD. TENANT NUMBER (TN)MONITORED NUMBER (MNO) MAX. 5 DIGITS ( Note 1)MONITORED NUMBER INDEX (NMI) 1 ~ 4095GOING BY UCD WHEN MONITOR STATUS IS NOT REQUESTED FROM AP (UCD) 0/1UCD PILOT NUMBER (STN) MAX. 5 DIGIT (Note 1)DESIGNATION OF ADMINISTRATION/ GUEST ROOM (A: FOR ADMINI G: FOR GUEST ROOM) ( Note 2) |||| |||| |||| |||| |||| |||| |||| |||| |||| |||| |||| |||| |||| |||| |||| |||| |||| |||| |||| ||||
CHAPTER 4 ND-70895 (E) Page 36 Revision 1.0 COMMANDS AOAC AOAC: Assignment of OAI Access Code 16. Functions This command is used to assign/delete the Facility Kind and the Operation Code on a basis of each service access code of the OAI System. 17. Precaution (a) When setting a minus value (less than 0) to the parameter “OP-CODE”, add “-” (minus symbol) ahead to the value. If the set value is a positive value, it is automatically interpreted to be a positive value even if “+” (plus symbol) is not added ahead of the value. (b) For assigning OAI access codes, it is necessary to assign the necessary number of digits of OAI access codes by AOKC command in advance to assigning the codes. 18. Parameters OAI-ACC : OAI Access Codes (000 ~ ###) (Max. 3 digits) F-KIND : Facility Kind (1 ~ 15) 1: Terminal Mode Set Facility (MSF) 2: Terminal Multiple Information Transfer Facility (TMF) 3: Not used 15: OP-CODE : Operation Codes (128~ 255) When F-KIND = 1, 128 ~ 191 When F-KIND = 2, 192 ~ 255 19. Related Command List Up : LOAC
ND-70895 (E) CHAPTER 4 Page 37 Revision 1.0 COMMANDS AOAC OAI Access Code Data Assignment Table Note:The number of digits for OAI Access Codes is to be set by AOKC command. OAI ACCESS CODE (MAX 3 DIGITS) (OAI-ACC)FACILITY KIND (1/2) (F-KIND)OPERATION CODE 128 ~ 255 (OP-CODE)
CHAPTER 4 ND-70895 (E) Page 38 Revision 1.0 COMMANDS AOKC AOKC: Assignment of OAI Key Code 20. Functions This command is used to assign/delete the Facility Kind and the Operation Code on a basis of each function key on the D term. 21. Precaution (a) The OAI code for which F-KIND = 3 (Open Application Interface) can be assigned is only one per system. (b) When deleting the Open Application Interface (OAI) key code for which F-KIND = 3 is assigned, it is necessary, in advance to the intended deletion, to delete all the OAI access code data assigned by AOAC . (c) When OAI key data has been assigned/deleted on basis of a function key by this command, operation of the OAI key is ignored only once immediately after that assignment/deletion or immediately after a system initialization. 22. Parameters KEY-CODE: OAI Key Codes (1 ~ 31) Note 1 F-KIND : Facility Kind (1 ~ 15) 1: Terminal Mode Set Facility (MSF) 2: Terminal Multiple Information Transfer Facility (TMF) 3: Open Application Interface (OAI) 4: Key Code Transfer Facility (KTF) 5. Not used 15: C-TONE : Chime control on normal end of MSF, TMF, and OAI 0: To be controlled 1: Not to be controlled (No Tone) NND : Necessary Number of Digits (1 ~ 3) Note 2 OP-CODE : Operation Codes Note 3 (128 ~ 255) Operation Codes 128 (0080)H: MSF OA I (Terminal Mode Set Facility) 191 (00BF)H: MSF 192 (00C0)H: TMF OA I (Terminal Multiple Information Transfer Facility) 255 (00FF)H: TMF
ND-70895 (E) CHAPTER 4 Page 39 Revision 1.0 COMMANDS AOKC Note 1: The relationship between this parameter and the AKYD command parameter FKY = 34 ~ 47 is shown below. Note 2:Enter this parameter only when F-KIND = 3. Note 3:This parameter can be entered only when F-KIND = 1, 2. The range of the values that can be entered is as follows: F-KIND = 1: OP-CODE = 128 ~ 191 F-KIND = 2: OP-CODE = 192 ~ 255 23. Related Commands List Up: LOKC PARAMETER KEY CODEAKYD COMMAND PARAMETER FKY 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 ~ 3134 35 36 37 38 39 40 41 42 43 44 45 46 47 Not used
CHAPTER 4 ND-70895 (E) Page 40 Revision 1.0 COMMANDS AOKC OAI Key Code Data Assignment Table Note 1:This parameter is to be entered only when F-KIND = 3. Note 2:This parameter is to be entered only when F-KIND = 1, 2. Note 3:The KEY-CODE for which F-KIND = 3 can be assigned is only one per system. Note 4:When deleting a Key-Code assigned on F-KIND = 3, it is necessary to delete all the Key-Code data before- hand by Assignment of OAI Access Code Data (AOAC) command. OAI KEY CODE (1 ~ 31) (KEY-CODE)FACILITY KIND (1 ~ 15) (F-KIND)NECESSARY NUMBER OF DIGITS (1 ~ 3) (NND) (Note 1)OPERATION CODE (128 ~ 255) (OP-CODE) (Note 2)CHIME CONTROL ON NOR- MAL END OF MSF, TMF (0/1) (C-TONE)