NEC Neax 2000 Ivs2 Isdn System Manual

 NEAX2000 IVS2 ISDN System ManualPage 180  ND-70919 (E), Issue 1.0
CHAPTER 4  CIRCUIT CARD INFORMATION
PN-SC03 (ICH)
PN-SC03 (ICH)
Locations of Lamps, Switches, and Connectors
Lamp Indications
LAMP 
NAMECOLOR FUNCTION
RUN Green Flashes at 120 IPM while this card is operating normally
DOPE7 Green Remains lit when No. 7 circuit D channel link is connected
DOPE6 Green Remains lit when No. 6 circuit D channel link is connected
DOPE5 Green Remains lit when No. 5 circuit D channel link is connected
DOPE4 Green...

CHAPTER 4  CIRCUIT CARD INFORMATION
PN-SC03 (ICH)
NEAX2000 IVS2 ISDN System Manual    
ND-70919 (E), Issue 1.0   Page 181
Switch Settings
The figure in the SWITCH NAME column and the position in    in the SETTING POSITION
column indicate the standard setting of the switch. When the switch is not set as shown by the
figure and   , the setting of the switch varies with the system concerned.
NOTE 1:Set the groove on the switch to the desired position.
NOTE 2:When the power is on, flip the MB switch to ON...

 NEAX2000 IVS2 ISDN System ManualPage 182  ND-70919 (E), Issue 1.0
CHAPTER 4  CIRCUIT CARD INFORMATION
PZ-M542 (CONN)
PZ-M542 (CONN)
Locations of Lamps, Switches, and Connectors
Lamp Indications
This card has no lamps.
JP2
RCV21
FOR 
No.2 
CIRCUIT 
 
LT CJP1LTTO LTC CONNECTOR 
ON BWB IN PIM TO CHAMP 
CONNECTOR (MDF)
JP0
TRS21
TRS01
FOR 
No.0 
CIRCUIT
COAXIAL CONNECTORRCV01
RCV11
FOR 
No.1 
CIRCUITTRS11 

CHAPTER 4  CIRCUIT CARD INFORMATION
PZ-M542 (CONN)
NEAX2000 IVS2 ISDN System Manual    
ND-70919 (E), Issue 1.0   Page 183
Switch Settings
The figure in the SWITCH NAME column and the position in   in the SETTING POSITION
column indicate the standard setting of the switch. When the switch is not set as shown by the
figure and  , the setting of the switch varies with the system concerned.
SWITCH NAMESWITCH
NUMBERSETTING
POSITIONFUNCTION CHECK
JP0For coaxial connectors
(No. 0 circuit)
LEFTFor champ...

 NEAX2000 IVS2 ISDN System ManualPage 184  ND-70919 (E), Issue 1.0
CHAPTER 4  CIRCUIT CARD INFORMATION
PZ-M557 (CONN)
PZ-M557 (CONN)
Locations of Lamps, Switches, and Connectors
Lamp Indications
This card has no lamps.
JP2
RCV20
FOR 
No.2 
CIRCUIT 
 
LT CJP1LTTO LTC CONNECTOR 
ON BWB IN PIM TO CHAMP 
CONNECTOR (MDF)
JP0
TRS20
TRS00
FOR 
No.0 
CIRCUIT
COAXIAL CONNECTORRCV00RCV10
FOR 
No.1 
CIRCUIT
TRS10 

CHAPTER 4  CIRCUIT CARD INFORMATION
PZ-M557 (CONN)
NEAX2000 IVS2 ISDN System Manual    
ND-70919 (E), Issue 1.0   Page 185
Switch Settings
The figure in the SWITCH NAME column and the position in   in the SETTING POSITION
column indicate the standard setting of the switch. When the switch is not set as shown by the
figure and  , the setting of the switch varies with the system concerned.
SWITCH NAMESWITCH
NUMBERSETTING
POSITIONFUNCTION CHECK
JP0For coaxial connectors
(No. 0 circuit)
LEFTFor champ...

 NEAX2000 IVS2 ISDN System ManualPage 186  ND-70919 (E), Issue 1.0
CHAPTER 4  CIRCUIT CARD INFORMATION
PN-2ILCA (ILC)
PN-2ILCA (ILC)
Locations of Lamps, Switches, and Connectors
PA L 1AC T1
LPB1
B21
B11
PA L 0 AC T0
LPB0
B20
B10
SW1
SW0 

CHAPTER 4  CIRCUIT CARD INFORMATION
PN-2ILCA (ILC)
NEAX2000 IVS2 ISDN System Manual    
ND-70919 (E), Issue 1.0   Page 187
Lamp Indications
LAMP 
NAMECOLOR FUNCTION
ACT1 Green No. 1 
CircuitON: Normally operating
OFF: Not operating
PAL1 Red ON: Line is short-circuiting.
OFF: Normally operating
LPB1 Red OFF: Not used
B21 Green ON: B2 channel is in use.
OFF: B2 channel is idle.
B11 Green ON: B1 channel is in use.
OFF: B1 channel is idle.
ACT0 Green No. 0 
CircuitON: Normally operating
OFF: Not operating...

 NEAX2000 IVS2 ISDN System ManualPage 188  ND-70919 (E), Issue 1.0
CHAPTER 4  CIRCUIT CARD INFORMATION
PN-2ILCA (ILC)
Switch Settings
The figure in the SWITCH NAME column and the position in in the SETTING POSITION
column indicate the standard setting of the switch. When the switch is not set as shown by the
figure and , the setting of the switch varies with the system concerned.
SWITCH NAMESWITCH 
NUMBERSETTING
POSITIONFUNCTION CHECK
SW1
(Piano Key SW)1 Always set to OFF.
2 Always set to OFF.
3 Always...

NEAX2000 IVS2 ISDN System Manual    
ND-70919 (E), Issue 1.0   Page 189
CHAPTER 5
OPERATION TEST
This chapter explains the operation test to be performed after
completion of the ISDN installation. For fault diagnosis by MAT or CAT,
refer to the Maintenance Manual.