NEC Neax 2000 Ivs2 Business/Hotel/Data Features And Specifications

ALPHANUMERIC DISPLAY
NEAX2000 IVS2
   Business/Hotel/Data Features and SpecificationsPage 8 NDA-24271, Issue 1.0
Service Conditions
1. The maximum number of stations that can be provided with a users name display is 512. The maximum
number of characters per name is 16, (including spaces). The Maintenance Administration Terminal (MAT)
or Customer Administration Terminal (CAT) can be used to register or change a name. A Multiline Termi-
nal can register or change the name assignment of that individual...

ANALOG PORT ADAPTER
NEAX2000 IVS2
Business/Hotel/Data Features and Specifications  
NDA-24271, Issue 1.0  Page 9
ANALOG PORT ADAPTER
General Description
This feature allows an Analog Port Adapter unit combined with a Multiline Terminal to connect to an analog
terminal such as an analog telephone, Modem, and PC with built-in Modem.
There are two communication modes for the terminal connected via the Analog Port Adapter as shown below:
1. Single Port Mode
A Multiline Terminal and an analog terminal share...

ANALOG PORT ADAPTER
NEAX2000 IVS2
   Business/Hotel/Data Features and SpecificationsPage 10 NDA-24271, Issue 1.0
To answer an incoming call to the secondary extension from an analog terminal via the Analog Port Adapter
1. An analog terminal does not ring when a call terminates the secondary extension on the Multiline Terminal. 
2. Press the line key of the secondary extension on the Multiline Terminal and lift the handset of the Multiline
Terminal. The LED of the secondary extension on the Multiline...

ANNOUNCEMENT SERVICE
NEAX2000 IVS2
Business/Hotel/Data Features and Specifications  
NDA-24271, Issue 1.0  Page 11
ANNOUNCEMENT SERVICE
General Description
This feature allows station users to record messages on Digital Announcement Trunk (DAT) cards. When a sta-
tion user dials the feature access code for this feature, the user receives the corresponding message from the sys-
tem.
Also Announcement Service can be used to provide a voice message in the following cases:
An incoming C.O. line/Tie line...

ANNOUNCEMENT SERVICE
NEAX2000 IVS2
   Business/Hotel/Data Features and SpecificationsPage 12 NDA-24271, Issue 1.0
To record/replay/delete for each Digital Announcement Trunk card
To record a message
1. Go off-hook and receive Dial Tone.
2. Dial the Digital Announcement Trunk record access code and Digital Announcement card number. Three
seconds of tone will be supplied.
3. Record the message (maximum duration – 60 seconds).
4. Restore handset.
To replay a message
1. Go off-hook and receive Dial Tone....

ANNOUNCEMENT SERVICE
NEAX2000 IVS2
Business/Hotel/Data Features and Specifications  
NDA-24271, Issue 1.0  Page 13
d. Call Forwarding, if set, has priority over this feature.
e. Digital Announcement Trunk Cards can be shared among tenants. Each announcement is assigned on
a per tenant basis.
f. This feature does not function on Attendant transferred calls.
9. A voice message in place of Music-On-Hold can be provided when a call has been placed on hold.
a. Different messages can be programmed on a tenant...

ANSWER KEY
NEAX2000 IVS2
   Business/Hotel/Data Features and SpecificationsPage 14 NDA-24271, Issue 1.0
ANSWER KEY
General Description
An Answer Key is provided on all Multiline Terminals. The Answer Key can be used to answer incoming calls
on outside lines, and primary or secondary extensions. When the Answer Key is used to answer an incoming
call with a call in progress, the first party is placed on hold and the second party is connected. If the Answer Key
is pressed while in a three-party call, the...

ANSWER KEY
NEAX2000 IVS2
Business/Hotel/Data Features and Specifications  
NDA-24271, Issue 1.0  Page 15
4. When a Broker’s Call is in progress, the Answer key cannot be used to answer incoming calls, but will al-
ternate between the existing calls when pressed.
5. When a three-party Conference is in progress, pressing the Answer key splits the Conference and establishes
a Broker’s Call. The Answer key has no effect on a 4-party conference.
6. Camped-on calls are answered by the Answer key prior to...

ATTENDANT ASSISTED CALLING
NEAX2000 IVS2
   Business/Hotel/Data Features and SpecificationsPage 16 NDA-24271, Issue 1.0
ATTENDANT ASSISTED CALLING
General Description
This feature allows a station user to ask an Attendant for assistance in originating a call. Three methods are
available: non-delay, delay, and passing dial tone.
Station Application
All stations.
Operating Procedure
Non-delay operation
1. The Attendant answers an operator call by pressing the Answer or ATND key.
2. The caller provides a...

ATTENDANT ASSISTED CALLING
NEAX2000 IVS2
Business/Hotel/Data Features and Specifications  
NDA-24271, Issue 1.0  Page 17
Service Conditions
1. During delay operation, the Attendant may release the connection either before or after the called station
answers.
2. If the call was processed using non-delay or passing dial tone operation, there will not be an Automatic Re-
call for Station-to-Trunk calls when the called party does not answer.
3. If the call was processed using non-delay or passing dial tone...