NEC Neax 2000 Ivs2 Business/Hotel/Data Features And Specifications

TABLE OF FEATURES
NEAX2000 IVS2
   Business/Hotel/Data Features and SpecificationsPage xiv NDA-24271, Issue 1.0
Attendant Night TransferX
→
Call ReroutingX
→
Day/Night Mode Change by Attendant ConsoleX
→
Day/Night Mode Change by Station DialingXE
Night Connection - FixedX
→
Night Connection - FlexibleX
→
Trunk Answer Any Station (TAS)XE
Off-Hook AlarmX
→
Off-Premises ExtensionsX
→ 
 Note
Open Application Interface (OAI)X
→
Pad LockX
→
Periodic Time Indication ToneX
→
Pooled Line AccessX
→
Power Failure...

TABLE OF FEATURES
NEAX2000 IVS2
Business/Hotel/Data Features and Specifications  
NDA-24271, Issue 1.0  Page xv Vo l u m e  C o n t r o lX
→
Q-SIG Circuit Switched Basic Call - ETSI VersionX
→
Remote HoldX
→
Remote PIMX
→ 
 Note
Reserve PowerX
→  Note
Resident System ProgramX
→
Return Message Schedule DisplayX
→
Room CutoffX
→ 
 Note
Room StatusX
→  Note
Route AdvanceX
→
Save and RepeatX
→
Security AlarmXE
Set Relocation—X
Simultaneous Voice and Data Transmission X—
Single Digit DialingX
→
Software Line...

TABLE OF FEATURES
NEAX2000 IVS2
   Business/Hotel/Data Features and SpecificationsPage xvi NDA-24271, Issue 1.0
Note:
This feature is not available in NEAX EXPRESS.
Uniform Call Distribution (UCD)XE
Busy In/Busy Out - UCDX
→
Call Waiting Indication - UCDXE
Delay Announcement - UCDXE
Hunt Past No Answer - UCDX
→
Immediate Overflow - UCDX
→
Priority Queuing - UCDX
→
Queue Size Control - UCDX
→
Silent Monitor - UCDX
→
Uniform Numbering Plan (UNP) - Voice and DataXE
Variable Timing ParametersX
→
Vo i c e  G...

ACCOUNT CODE
NEAX2000 IVS2
Business/Hotel/Data Features and Specifications  
NDA-24271, Issue 1.0  Page 1
ACCOUNT CODE
General Description
This feature, when used with Station Message Detail Recording (SMDR), allows station users and Attendants
to enter a cost accounting or client billing code (up to 16 digits) into the system.
Station Application
All stations.
Operating Procedure
To enter an Account Code from a station before accessing an outside line
1. Lift the handset and receive dial tone.
2. Enter...

ACCOUNT CODE
NEAX2000 IVS2
   Business/Hotel/Data Features and SpecificationsPage 2 NDA-24271, Issue 1.0
Service Conditions
1. The maximum number of digits in an Account Code is 10 when using the NEAX2400 SMDR format; oth-
erwise, the maximum is 16. There is no limitation to the number of Account Codes used per system. The
feature access code for Account Code entry can be one to three digits.
2. A station user can enter an Account Code consisting of fewer digits than the maximum length defined and...

ADD-ON MODULE
NEAX2000 IVS2
Business/Hotel/Data Features and Specifications  
NDA-24271, Issue 1.0  Page 3
ADD-ON MODULE
General Description
This feature allows the Add-On Module to be combined with a Multiline Terminal when there are insufficient
line or trunk keys provided at the Multiline Terminal.
When the Add-On Module unit keys are programmed as line/trunk keys, the additional 25 lines/trunks and the
existing lines/trunks set for the Multiline Terminal can be accessed directly (maximum of 49 lines/...

ADD-ON MODULE
NEAX2000 IVS2
   Business/Hotel/Data Features and SpecificationsPage 4 NDA-24271, Issue 1.0
13. A DLC Card must be provided when using the Add-On Module.  The Add-On Module unit uses one port
of the card.
14. Up to 25 lines and trunks can be assigned for the Add-On  Module. The delayed ringing function is only
available for the  first 16 lines and trunks assigned.
15. For each 24-button D
term (Series III) and 32-button Dterm (Series E), there will be one less Add-On  Module
available per FP. 

ALARM INDICATIONS
NEAX2000 IVS2
Business/Hotel/Data Features and Specifications  
NDA-24271, Issue 1.0  Page 5
ALARM INDICATIONS
General Description 
Faults are indicated by the Major/Minor (MJ/MN) lamps located on the AC/DC Power Supply and, optionally,
an external alarm display unit.
Station Application
Not applicable.
Operating Procedure
No manual operation is required.
Service Conditions
1. The following table shows a standard pattern of the faults that can be detected and their alarm indications.
If...

ALARM INDICATIONS
NEAX2000 IVS2
   Business/Hotel/Data Features and SpecificationsPage 6 NDA-24271, Issue 1.0
2. Normal operation of each Firmware Processor (FP) is indicated by a green flashing (120 int) “run” LED
located on the FP.
3. Normal operation of the Main Processor (MP) is indicated by a green flashing (120 int) “run” LED located
on the MP.
4. Normal operation of each AC/DC power supply is indicated by a steadily lit green LED located on the AC/
DC power supply.
5. In case that PBX is stopped...

ALPHANUMERIC DISPLAY
NEAX2000 IVS2
Business/Hotel/Data Features and Specifications  
NDA-24271, Issue 1.0  Page 7
ALPHANUMERIC DISPLAY
General Description
The LCD display on Multiline Terminal is used to provide alphanumeric information including clock/calendar
and call processing information.
Station Application
All Multiline Terminals with LCD.
Operating Procedure
Displays are automatically provided by the system once programmed; however, a Multiline Terminal users
name can be changed as required from...