NEC Neax 2000 Ivs Ccis Features And Specifications

							NEAX2000 IVS CCIS Features and Specifications
Page 4NDA-24159, Issue 2
Attendant Camp-On With Tone Indication - CCIS
RBT Main Office
Main OfficePublic Music Public 
RG
C:6789B:4567
Called Party ReleaseB:4567
C:6789
ROTB: ON HOOK Attendant
Tributary OfficeSatellite Office
Public 
Attendant
Tributary OfficeSatellite Office
Public (NEAX2000) Console Network
(NEAX2400/
NEAX2000)
(NEAX2000)
Network
Network
Console(NEAX2000)
(NEAX2400/
NEAX2000)
(NEAX2000)
Network
Camped On Call hears
Music On Hold
and Camped On Call Hears
Ring Back Tone (RBT) and
Station 4567 Rings 
						

							NEAX2000 IVS CCIS Features and Specifications
NDA-24159, Issue 2
Pa ge  5
Attendant Controlled Conference - CCIS
General Description
This feature permits an Attendant (NEAX2400 IMS) to establish a conference, via CCIS, with up to eight parties
of stations and/or trunks (inside and outside parties).
Operating Procedure
To activate an Attendant Controlled Conference - CCIS:
1. A station (conference leader) calls an Attendant (NEAX2400 IMS only) to request a conference.
2. The Attendant connects the conference leader to one of the assigned line circuits.
3. The Attendant sequentially calls all desired parties and connects them to the other assigned line circuits.
4. Once all the parties are connected, any conferee with a push-button telephone may dial a 9 to block addi-
tional participants, thereby assuring privacy.
5. If any push-button station user connected to the conference trunk dials a 0, all the conferees will be dis-
connected. Otherwise, the conference is terminated only after all the parties hang up.
6. To release from the conference trunk individually, a station user hangs up. The remaining conferees may con-
tinue without interruption.
Service Conditions
1. A conference unit (PA-CFTB) must be mounted on the NEAX2400 IMS.
2. Stations and Attendants of the NEAX2000 IVS system cannot be the conference leader.
NEAX1400
CCIS
Conference leader(ATT CON) CFT
NEAX2400 
						

							NEAX2000 IVS CCIS Features and Specifications
Page 6NDA-24159, Issue 2
Brokerage - Hot Line - CCIS
General Description
This feature provides a ringdown connection between two stations, each using a Multiline Terminal, in different
offices in the CCIS Network.
Operating Procedure
To access a Brokerage - Hot Line - CCIS from a Multiline Terminal:
1. Lift the handset or press the SPKR key.
2. Press the line/feature key associated with the preassigned station. The destination station is automatically di-
aled, ringback tone is heard and the destination station answers.
3. After completing the conversation, hang up or press the RELEASE key.
To make another Brokerage - Hot Line - CCIS call immediately, press another line/feature key without going
on hook and off hook.
Service Conditions
Calling party:
1. Any Multiline Terminal, used for this feature, must be assigned a Primary Extension.
2. When a Brokerage - Hot Line - CCIS call is made from a Multiline Terminal with LCD display the display
shows the destination station number.
3. The feature is applicable for inter-office connections on the CCIS Network. The destinations must be a sta-
tion or an Attendant Console at different offices.
4. There is a maximum of 100 Brokerage - Hot Line - CCIS destination assignments.
5.Attendant Camp-On, Executive-Right-Of-Way, and Busy Verification can be prohibited to the Brokerage - Hot
Line - CCIS connection through Class Of Service-Individual.
Called party:
1. A Brokerage - Hot Line - CCIS call can be transferred to another station using the Call Transfer feature.
2.Call Forwarding is applied whenever the destination station of the Brokerage - Hot Line - CCIS call has set
Call Forwarding (All Calls, Busy and Don’t Answer).
3. Station hunting works if the destination station is a pilot in a hunt group. The UCD function works if the
destination station is a pilot of a UCD group.
4. When a destination is an Attendant Console, the Brokerage - Hot Line - CCIS call terminates as a Tie Line
call. 
						

							NEAX2000 IVS CCIS Features and Specifications
NDA-24159, Issue 2
Pa ge  7
Busy Verification - CCIS
General Description
This feature permits an Attendant, via the Attendant Console on the NEAX2400 IMS or the NEAX2000 IVS,
to interrupt a busy station’s call at another switching office that connected through CCIS.
Operating Procedure
To activate a Busy Verification - CCIS:
1. Press an idle LOOP key.
2. Dial the desired station number; receive busy tone.
3. Press the BV key.
4. A two-burst tone is sent to the connected parties.
5. The Attendant may monitor or join the conversation.
6. Press the RELEASE key to disengage.
Service Conditions
1. This feature can be activated from an Attendant Console of either the NEAX2400 IMS or the NEAX2000
IVS in the CCIS network.
2. This feature can be used to monitor two-party calls (station and trunk or another station).
3. This feature cannot be established to a busy station when the station is:
• Dialing
• Listening to a tone
• Being rung
• Protected from Busy Verification by Class of Service
• Being connected to an Attendant 
						

							NEAX2000 IVS CCIS Features and Specifications
Page 8NDA-24159, Issue 2
Busy Verification - CCIS
NEAX2000
CCIS
ATT  To STA/CO/TIE/CCIS
BV STANEAX2400
/NEAX2000
PBX-APBX-B
By dialing the busy station number in PBX-A and pressing Busy/Verification Feature key, the Attendant Console can verify Busy
status of any station in PBX-A. 
						

							NEAX2000 IVS CCIS Features and Specifications
NDA-24159, Issue 2
Page 9
Busy Verification - CCIS
The linking procedure between two switching offices is as follows:
Main OfficeBusy Main Office
Tributary Office
ATT: BVDial
C:6789
C:6789B:4567
B:4567 Attendant Console
Satellite Office
Public Network
Tributary Office Attendant
Satellite Office
Public Network (NEAX2400/
NEAX2000)Tone4567 (BT)
(NEAX2000)
(NEAX2000)
Console
(NEAX2000)
(NEAX2400/
NEAX2000)
(NEAX2000) 
						

							NEAX2000 IVS CCIS Features and Specifications
Page 10Addendum-003 NDA-24159, Revision 2.3
July, 1998
Call Back - CCIS
General Description
This feature provides inter-office Call Back. A station who has dialed a busy station at another office can set
Call Back - CCIS by dialing a feature access code. When this feature has been set, the setting station will ring
as soon as the busy station becomes available.
Operating Procedure
To set a Call Back - CCIS from a Single Line Telephone:
1. Dial the desired station number; receive busy tone.
2. Press the hook switch; receive feature dial tone.
3. Dial the Call Back feature access code; receive service set tone.
4. Replace the handset.
5. When the busy station becomes idle, the setting station will ring.
6. When the setting station answers, the originally called station will ring.
To cancel a Call Back - CCIS from a Single Line Telephone:
1. Lift the handset; receive dial tone.
2. Dial the Call Back cancellation code; receive service set tone.
To set a Call Back - CCIS from a Multiline Terminal:
1. Dial the desired station number; receive busy tone.
2. Press the Call Back feature key; receive service set tone. The LCD display shows:
3. Replace the handset.
4. When the busy station becomes idle, the setting station will ring. The LCD display shows:

  
 
   	


        	


   
Called station number Series III Series E
                                                
     	


                             	



Called station number
flashes at calling stationSeries E Series III 
						

							NEAX2000 IVS CCIS Features and Specifications
NDA-24159, Revision 2.3 Addendum-003
Page 11July, 1998
Call Back - CCIS
5. When the setting station answers, the originally called station will ring.
6. The originally called stations LCD display shows:
To cancel a Call Back - CCIS from a Multiline Terminal:
1. Lift the handset or press the SPKR
 key; receive dial tone.
2. Press the Call Back feature key; receive service set tone. The feature is canceled.
3. The LCD display shows:
Service Conditions
1. If Call Back - CCIS is not answered within 30 seconds (at the calling station), ringing will stop and Call
Back - CCIS is automatically canceled.
2.Call Back - CCIS is allowed or denied via Class Of Service.
3.Call Back - CCIS to a busy station cannot be established if that station is in the Line Lockout mode.
4. There is no time limit for Call Back - CCIS. Once Call Back - CCIS is activated, it will remain in status mem-
ory until completed or manually canceled.
5.Call Back - CCIS cannot be set to more than one station at a time.
6. A station can utilize Call Back - CCIS and Outgoing Queuing - CCIS at the same time.
7. When the setting station is called back, Station Hunting and Call Pickup will not apply.
8. A maximum of 32 stations can access this feature simultaneously.
9. A station user calling a busy station line can be automatically connected to the called station when both sta-
tions are idle. The activating station may originate and receive calls while Call Back - CCIS is active.
10.Call Back - CCIS records are lost when the system is initialized.
11. If Call Back - CCIS is activated from a NEAX2000 IVS station and both the activating and called stations
become idle, the activating station receives distinctive ringing. If the called station goes off hook before the
activating station answers, ringback tone is heard at the called station and distinctive ringing is provided at
the activating station. When the activating station answers, a two-party talk state is established.
12. When Call Back - CCIS is activated from a NEAX2400 IMS, both the activating and called stations will
receive ringing at the same time. If either station goes off hook before the other, ringback tone is heard by
the first station. When the other station answers, a two-party talk state is established.
                                                                
     	


                           	



Calling station numberSeries E
Series III
                                              
      	


                              	



Series E
Series III 
						

							NEAX2000 IVS CCIS Features and Specifications
Page 12NDA-24159, Issue 2
Call Back - CCIS
13.When the calling party dials the Call Back - CCIS feature access code or presses the CALL BACK key, if
the called party goes idle (while the calling party is still off hook), the calling party hears ringback tone and
the called party hears ringing. If the called party goes off hook, the parties can talk with each other.
Tributary OfficeService Set Tone Busy
C:6789 A:2345
C:DIALS
C:6789B:4567
B:4567 SETTING 
A:2345
C:DIALS Public
Tributary OfficeSatellite Office
Public Main Office
PublicSatellite Office
Public Main Office Network
Tone
(DT)-4567-(BT)
(DT)-4567-(BT)-SHF-1-(SST)
         TO SET CALLBACK CALLBACK
Network
Network Network 
						

							NEAX2000 IVS CCIS Features and Specifications
NDA-24159, Issue 2
Page 13
Call Back - CCIS
14.When the calling party waits on hook after having set Call Back-CCIS, the link is established as shown be-
low:
Main Office Main Office
Service Tributary Office
C:6789 A:2345
C:6789B:4567
B:4567 C: ON HOOK
A:2345C:DIALS Public
Satellite Office
Public
Tributary Office Public
Satellite Office
Public Network
Set Tone
Network
(DT)-4567-(BT)-SHF-1-(SST)
         TO SET CALL BACK
Network
Network