NEC Neax 2000 Ivs Ccis Features And Specifications
Here you can view all the pages of manual NEC Neax 2000 Ivs Ccis Features And Specifications. The NEC manuals for Communications System are available online for free. You can easily download all the documents as PDF.
Page 51
NEAX2000 IVS CCIS Features and Specifications NDA-24159, Revision 2.1 Addendum-001 Page 41April, 1997 Centralized Billing - CCIS 8. Billing messages are made in each gateway to the public network. CCIS Link CCIS Link CCIS Link NEAX2000NEAX2000 NEAX2000 LOCALLOCALBILLING MSG BILLING LOCAL BILLING MSGRS-232C CENTER OFFICE BILLING MSG CENTRALIZED MSGBILLING CENTER NEAX2400/ OFFICE OFFICE OFFICE NEAX2000
Page 52
NEAX2000 IVS CCIS Features and Specifications Page 42Addendum-001 NDA-24159, Revision 2.1 April, 1997 9. Each location can send Billing Messages to either Center Office. NEAX2000NEAX2000 NEAX2000 LOCALLOCAL BILLING MSG BILLING LOCAL BILLING MSGRS-232C CENTER OFFICE BILLING MSG CENTRALIZED MSGBILLING CENTER 1 NEAX2400/ OFFICE OFFICE OFFICE CENTRALIZED BILLING CENTER 2 AB C D NEAX2000 Example: Location A B Billing Center 2 Location B Billing Center 2 Location C D Billing Center 1 Location D Billing...
Page 53
NEAX2000 IVS CCIS Features and Specifications NDA-24159, Revision 2.3 Addendum-003 Page 42-1July, 1998 Centralized Billing - CCIS 10.When a call is originated from a station (Station A) of a local office (without AP00), via a COT of a center office (with AP00), a message is sent to the center office from the local office via CCIS. According to the station number of the calling party, the AP00 of the center office generates billing a message to the SMDR terminal. 11.When a call is originated from a Sub...
Page 54
NEAX2000 IVS CCIS Features and Specifications NDA-24159, Issue 2 Page 43 Centralized Day/Night Mode Change - CCIS General Description This feature switches the Day/Night mode of a remote office, linked to the main office NEAX2400 IMS via CCIS, in accordance with the Day/Night mode switching on the Attendant Console at the main office. Operating Procedure Main Office: 1. The Attendant executes Day/Night mode changeover operation using the normal Attendant Consoles (no master) method or the master...
Page 55
NEAX2000 IVS CCIS Features and Specifications Page 44NDA-24159, Issue 2 Consultation Hold - All Calls - CCIS General Description This feature permits a station user, within the CCIS network, to hold any incoming or outgoing public network or Tie Line call while originating a call to another station within the CCIS network. Operating Procedure To hold the original call and place a second call from a Single-Line Telephone: 1. Press the hookswitch momentarily and receive feature dial tone. 2. The original...
Page 56
NEAX2000 IVS CCIS Features and Specifications NDA-24159, Issue 2 Page 45 Consultation Hold - All Calls - CCIS To return to the original call from a Multiline Terminal: 1. In any of the following cases, the calling station can return to the original call by pressing the TRF key: A. The second station called is busy. B. The calling station cannot gain access to the second station due to a restriction. C. The second station does not answer. 2. If the second station hangs up, the calling station will...
Page 57
NEAX2000 IVS CCIS Features and Specifications Page 46NDA-24159, Issue 2 Deluxe Traveling Class Mark - CCIS General Description This feature provides outgoing call restrictions within the CCIS network. The following three types of restrictions are allowed: • Deluxe Traveling Class Mark Restriction • Route Restriction • Numbering Restriction Operating Procedure No manual operation is required. Service Conditions 1. The Route Restriction Class (RSC) of the calling party is sent to the called office as a...
Page 58
NEAX2000 IVS CCIS Features and Specifications NDA-24159, Revision 2.3 Addendum-003 Page 47July, 1998 Dial Access To Attendant - CCIS General Description This feature allows a station user to call an Attendant Console by dialing an operator call code through the CCIS network. Operating Procedure To call an Attendant Console: 1. The station user dials the operator call code and receives ringback tone. 2. The AT N D lamp for Incoming Call Identification flashes on the Attendant Console; the Attendant...
Page 59
NEAX2000 IVS CCIS Features and Specifications Page 48NDA-24159, Issue 2 Dial Access To Attendant - CCIS 12 00 0 822OPR NEAX2000/2400 Elapsed time Called party CALLED CALLINGCCIS820822 NEAX2000 IVSB: ATT A: 2000 Calling party (A)Called party (B)NEAX2000 IVS 821 PARTY ANSWERS Office codeTrunk RSC (Time Display) (Time Display) A: Dial 0 2 Dialed number Station number display on the ATT console can be changed to office code + station number by system data. Call identificationCalling...
Page 60
NEAX2000 IVS CCIS Features and Specifications NDA-24159, Issue 2 Page 49 Direct-In Termination - CCIS General Description This feature automatically routes incoming exchange calls through CCIS to a preassigned station in the network, without Attendant assistance. Operating Procedure The outside calling party dials the telephone number, as usual. The call is answered at a predetermined station, within the CCIS network, bypassing the Attendant Console. Service Conditions 1. Bothway trunks can be used for...