NEC Neax 2000 Ivs Ccis Features And Specifications

NEAX2000 IVS CCIS Features and Specifications
Page 14NDA-24159, Issue 2
Call Back - CCIS
15.If the called party goes on hook while the calling party is waiting on hook for Call Back-CCIS, both the call-
ing and called parties will be rung simultaneously, if the setting station is in the NEAX2400 IMS system.
When both parties go off hook, they can talk with each other. The party who answers first hears ringback
tone. If the setting station is in the NEAX2000 IVS system, the calling station is called...

NEAX2000 IVS CCIS Features and Specifications
NDA-24159, Issue 2
Page 15
Call Forwarding - All Calls - CCIS
General Description
This feature permits all calls destined for a particular station to be routed to another station or to an Attendant
Console, in another office in the CCIS network, regardless of the status (busy or idle) of the called station. The
activation and cancellation of this feature may be accomplished by either the station user or an Attendant.
Operating Procedure
To set a Call...

NEAX2000 IVS CCIS Features and Specifications
Page 16Addendum-003 NDA-24159, Revision 2.3
July, 1998
Call Forwarding - All Calls - CCIS
2. Press the Call Forwarding - All Calls feature key; receive feature dial tone.
3. Dial the outgoing trunk access code; receive a single burst of service set tone.
(This operation is required for a network using Open Numbering Plan)
4. Dial the desired target station number and receive service set tone.
Wait approximately five seconds; receive service set tone. The LED...

NEAX2000 IVS CCIS Features and Specifications
NDA-24159, Revision 2.3 Addendum-003
Page 17July, 1998
Call Forwarding - All Calls - CCIS
7.Call Forwarding-All Calls - CCIS can be used from any number of forwarding stations to the same desig-
nated station.
8. When calls are forwarded to the Attendant, the Incoming Call Identification feature does not allow the At-
tendant to identify the call as a forwarded call.
9. When Outgoing Trunk Queuing is provided, ringback is applied to the forwarding station and...

NEAX2000 IVS CCIS Features and Specifications
Page 17-1Addendum-003 NDA-24159, Revision 2.3
July, 1998
Call Forwarding - All Calls - CCIS
18.When a call is forwarded through CCIS, and then forwarded to another station by Call Forwarding - All
Calls/Busy Line/Don’t Answer or UCD Hunting, the last forwarding station number or the pilot station num-
ber of UCD Group is indicated.
PBX-APBX-B
STATION
/TRUNKCCIS
STATION 2000
Kind of Call Forwarding
Call Forwarding-All Calls/
/Busy Line/Don’t Answer. Call is...

NEAX2000 IVS CCIS Features and Specifications
Page 18NDA-24159, Issue 2
Call Forwarding - Busy Line - CCIS
General Description
This feature permits a call to a busy station to be immediately forwarded to a predesignated station or to an At-
tendant Console in another office in the CCIS network.
Operating Procedure
To set a Call Forwarding-Busy Line - CCIS from a Single-Line Telephone:
1. Lift the handset, receive dial tone.
2. Dial the Call Forwarding-Busy Line feature access code; receive feature dial...

NEAX2000 IVS CCIS Features and Specifications
NDA-24159, Revision 2.3 Addendum-003
Page 19July, 1998
Call Forwarding - Busy Line - CCIS
3. Dial the desired target station number and receive service set tone.
4. Dial the outgoing trunk access code; receive a single burst of service set tone.
(This operation is required for a network using Open Numbering Plan)
5. Wait approximately five seconds; receive service set tone. The LED lights and the LCD display shows:
6. Replace the handset or press the SPKR...

NEAX2000 IVS CCIS Features and Specifications
Page 20Addendum-003 NDA-24159, Revision 2.3
July, 1998
Call Forwarding - Busy Line - CCIS
8. There is a maximum of 240 stations which can set Call Forwarding (including -All Calls, -Busy Line, -Don’t
Answer - CCIS) across CCIS simultaneously.
9.Call Forwarding-Busy Line - CCIS can be set from the Multiline Terminal primary or a secondary extension.
10.Individual Call Forwarding-Busy Line - CCIS supersedes system Call Forwarding.
11.Call Forwarding-Busy Line -...

NEAX2000 IVS CCIS Features and Specifications
NDA-24159, Revision 2.3 Addendum-003
Page 20-1July, 1998
Call Forwarding - Busy Line - CCIS
22.When a call is forwarded through CCIS, and then forwarded to another station by Call Forwarding - All
Calls/Busy Line/Don’t Answer or UCD Hunting, the last forwarding station number or the pilot station num-
ber of UCD Group is indicated.
PBX-APBX-B
STATION
/TRUNKCCIS
STATION 2000
Kind of Call Forwarding
Call Forwarding-All Calls/
/Busy Line/Don’t Answer. Call is...

NEAX2000 IVS CCIS Features and Specifications
NDA-24159, Issue 2
Page 21
Call Forwarding - Don’t Answer - CCIS
General Description
This feature permits a call to an unanswered station to be forwarded to a predesignated station or to an Attendant
Console in another office, when the called station does not answer after a predetermined time interval.
Operating Procedure
To set a Call Forwarding-Don’t Answer - CCIS from a Single-Line Telephone:
1. Lift the handset; receive dial tone.
2. Dial the Call...