NEC Neax 2000 Ivs Ccis Features And Specifications

NEAX2000 IVS CCIS Features and Specifications
Page 4NDA-24159, Issue 2
Attendant Camp-On With Tone Indication - CCIS
RBT Main Office
Main OfficePublic Music Public 
RG
C:6789B:4567
Called Party ReleaseB:4567
C:6789
ROTB: ON HOOK Attendant
Tributary OfficeSatellite Office
Public 
Attendant
Tributary OfficeSatellite Office
Public (NEAX2000) Console Network
(NEAX2400/
NEAX2000)
(NEAX2000)
Network
Network
Console(NEAX2000)
(NEAX2400/
NEAX2000)
(NEAX2000)
Network
Camped On Call hears
Music On Hold
and Camped...

NEAX2000 IVS CCIS Features and Specifications
NDA-24159, Issue 2
Pa ge  5
Attendant Controlled Conference - CCIS
General Description
This feature permits an Attendant (NEAX2400 IMS) to establish a conference, via CCIS, with up to eight parties
of stations and/or trunks (inside and outside parties).
Operating Procedure
To activate an Attendant Controlled Conference - CCIS:
1. A station (conference leader) calls an Attendant (NEAX2400 IMS only) to request a conference.
2. The Attendant connects the...

NEAX2000 IVS CCIS Features and Specifications
Page 6NDA-24159, Issue 2
Brokerage - Hot Line - CCIS
General Description
This feature provides a ringdown connection between two stations, each using a Multiline Terminal, in different
offices in the CCIS Network.
Operating Procedure
To access a Brokerage - Hot Line - CCIS from a Multiline Terminal:
1. Lift the handset or press the SPKR key.
2. Press the line/feature key associated with the preassigned station. The destination station is automatically di-...

NEAX2000 IVS CCIS Features and Specifications
NDA-24159, Issue 2
Pa ge  7
Busy Verification - CCIS
General Description
This feature permits an Attendant, via the Attendant Console on the NEAX2400 IMS or the NEAX2000 IVS,
to interrupt a busy station’s call at another switching office that connected through CCIS.
Operating Procedure
To activate a Busy Verification - CCIS:
1. Press an idle LOOP key.
2. Dial the desired station number; receive busy tone.
3. Press the BV key.
4. A two-burst tone is sent to...

NEAX2000 IVS CCIS Features and Specifications
Page 8NDA-24159, Issue 2
Busy Verification - CCIS
NEAX2000
CCIS
ATT  To STA/CO/TIE/CCIS
BV STANEAX2400
/NEAX2000
PBX-APBX-B
By dialing the busy station number in PBX-A and pressing Busy/Verification Feature key, the Attendant Console can verify Busy
status of any station in PBX-A. 

NEAX2000 IVS CCIS Features and Specifications
NDA-24159, Issue 2
Page 9
Busy Verification - CCIS
The linking procedure between two switching offices is as follows:
Main OfficeBusy Main Office
Tributary Office
ATT: BVDial
C:6789
C:6789B:4567
B:4567 Attendant Console
Satellite Office
Public Network
Tributary Office Attendant
Satellite Office
Public Network (NEAX2400/
NEAX2000)Tone4567 (BT)
(NEAX2000)
(NEAX2000)
Console
(NEAX2000)
(NEAX2400/
NEAX2000)
(NEAX2000) 

NEAX2000 IVS CCIS Features and Specifications
Page 10Addendum-003 NDA-24159, Revision 2.3
July, 1998
Call Back - CCIS
General Description
This feature provides inter-office Call Back. A station who has dialed a busy station at another office can set
Call Back - CCIS by dialing a feature access code. When this feature has been set, the setting station will ring
as soon as the busy station becomes available.
Operating Procedure
To set a Call Back - CCIS from a Single Line Telephone:
1. Dial the desired...

NEAX2000 IVS CCIS Features and Specifications
NDA-24159, Revision 2.3 Addendum-003
Page 11July, 1998
Call Back - CCIS
5. When the setting station answers, the originally called station will ring.
6. The originally called stations LCD display shows:
To cancel a Call Back - CCIS from a Multiline Terminal:
1. Lift the handset or press the SPKR
 key; receive dial tone.
2. Press the Call Back feature key; receive service set tone. The feature is canceled.
3. The LCD display shows:
Service Conditions
1. If...

NEAX2000 IVS CCIS Features and Specifications
Page 12NDA-24159, Issue 2
Call Back - CCIS
13.When the calling party dials the Call Back - CCIS feature access code or presses the CALL BACK key, if
the called party goes idle (while the calling party is still off hook), the calling party hears ringback tone and
the called party hears ringing. If the called party goes off hook, the parties can talk with each other.
Tributary OfficeService Set Tone Busy
C:6789 A:2345
C:DIALS
C:6789B:4567
B:4567 SETTING...

NEAX2000 IVS CCIS Features and Specifications
NDA-24159, Issue 2
Page 13
Call Back - CCIS
14.When the calling party waits on hook after having set Call Back-CCIS, the link is established as shown be-
low:
Main Office Main Office
Service Tributary Office
C:6789 A:2345
C:6789B:4567
B:4567 C: ON HOOK
A:2345C:DIALS Public
Satellite Office
Public
Tributary Office Public
Satellite Office
Public Network
Set Tone
Network
(DT)-4567-(BT)-SHF-1-(SST)
         TO SET CALL BACK
Network
Network