NEC Neax 2000 Ivs Ccis Features And Specifications

NEAX2000 IVS CCIS Features and Specifications
Page 80NDA-24159, Issue 2
Multiple Call Forwarding - Don’t Answer - CCIS
CALLING STATION
CCIS NETWORK
IDLEFG
Office AOffice B
CALL FORWARDING -  ALL CALLS SET
D BE
C
A
BE
C
A
CALLING STATION
CCIS NETWORK
IDLEF
G
Office B
Office A
CALL FORWARDING IS SET,  BUT FORWARDING DOES NOT OCCUR
CALL FORWARDING -  ALL CALLS SET
D 

NEAX2000 IVS CCIS Features and Specifications
NDA-24159, Issue 2
Page 81
Night Connection - Fixed - CCIS
General Description
When the Night mode has been entered, this service feature routes calls normally directed to the Attendant Con-
sole to a preselected station in another office, through the CCIS network.
Operating Procedure
To answer a Night Connection - Fixed - CCIS call:
1. An incoming call to the Attendant Console in Night mode is automatically transferred to a preselected Night
Connection...

NEAX2000 IVS CCIS Features and Specifications
Page 82NDA-24159, Issue 2
Night Connection - Flexible - CCIS
General Description
This feature provides an inter-office night connection service, via the CCIS network, when the calling station
and the night station belong to different offices.
Operating Procedure
To set Night Connection - Flexible - CCIS:
1. The Attendant or fixed night station user in the destination office sets Call Forwarding - All Calls - CCIS to
a station in another office.
To answer...

NEAX2000 IVS CCIS Features and Specifications
NDA-24159, Issue 2
Page 83
Outgoing Trunk Queuing - CCIS
General Description
This feature allows a CCIS network station, upon encountering an all trunk busy signal, to dial a specified access
code and enter a first-in, first-out queue. As soon as a CCIS trunk becomes available, stations in the queue will
be called back on a first-come, first-served basis.
Operating Procedure
To activate Outgoing Trunk Queuing - CCIS:
1. Dial the trunk access code; receive...

NEAX2000 IVS CCIS Features and Specifications
Page 84NDA-24159, Issue 2
Outgoing Trunk Queuing - CCIS
12.This feature is not available under the following conditions:
• When a station user in the NEAX2000 IVS system encounters a situation where all the outgoing trunks
from another switching office (connected through CCIS) are busy.
• When a station user in another switching office (connected through CCIS) encounters a situation where
all the outgoing trunks from the NEAX2000 IVS system are busy.
13.If a...

NEAX2000 IVS CCIS Features and Specifications
NDA-24159, Issue 2
Page 85
Paging Access - CCIS
General Description
This feature provides dial access to paging equipment from an Attendant Console or a station, through the CCIS
network.
Operating Procedure
To access paging equipment through CCIS:
1. Lift the handset; receive dial tone.
2. Dial the Paging feature access code.
3. The connection to paging equipment is established.
Service Conditions
1. Amplifiers and speakers must be provided by the customer....

NEAX2000 IVS CCIS Features and Specifications
Page 86NDA-24159, Issue 2
Restriction From Outgoing Calls - CCIS
General Description
This feature automatically restricts users of preselected stations from placing outgoing calls and/or certain mis-
cellaneous trunk calls through CCIS, without Attendant assistance.
Operating Procedure
No manual operation is required.
Service Conditions
1. The restricted station will automatically receive reorder tone upon attempting to place a restricted outgoing
call.
2....

NEAX2000 IVS CCIS Features and Specifications
NDA-24159, Issue 2
Page 87
Single-Digit Station Calling - CCIS
General Description
This feature allows the assignment of single-digit station numbers.
Operating Procedure
1. Lift the handset; receive dial tone.
2. Dial the single-digit preprogrammed station number.
3. The called station will be rung.
Service Conditions
1. The single-digit station number must be different from the first digit of:
• A Trunk Access Code
• A Service Feature Access Code
• Other...

NEAX2000 IVS CCIS Features and Specifications
Page 88NDA-24159, Issue 2
Station-Controlled Conference - CCIS
General Description
This feature allows any station of the NEAX2400 IMS to establish a conference among a maximum of eight
parties of stations and/or trunks (inside and outside parties) of the NEAX2000 IVS system, through CCIS.
Operating Procedure
To initiate a Station-Controlled Conference:
1. The station user wishing to establish the conference (the conference leader) calls all parties and...

NEAX2000 IVS CCIS Features and Specifications
NDA-24159, Issue 2
Page 89
Station-to-Station Calling - CCIS
General Description
This feature permits any station user to dial another station directly, through CCIS, without Attendant assistance.
Operating Procedure
To place a Station-To-Station Call:
1. Lift the handset and receive dial tone.
2. Dial the desired station number.
Service Conditions
1. If the called station is off-hook, the originating station receives a busy tone. Otherwise, the called...