NEC Neax 2000 Ivs Ccis Features And Specifications

NEAX2000 IVS CCIS Features and Specifications
Page 70Addendum-003 NDA-24159, Revision 2.3
July, 1998
Multiple Call Forwarding - All Calls - CCIS
3. Dial the outgoing trunk access code; receive a single burst of service set tone.
(This operation is required for a network using Open Numbering Plan.)
4. Dial the desired target station number and receive service set tone.
5. Wait approximately five seconds; receive service set tone. The LED lights and the LCD displays:
6. Replace the handset or press the...

NEAX2000 IVS CCIS Features and Specifications
NDA-24159, Issue 2
Page 71
Multiple Call Forwarding - All Calls - CCIS
6. If a calling station has been Call Forwarding - All Calls - CCIS five times within the same office and encoun-
ters a sixth Call Forwarding - All Calls - CCIS condition, the calling station will not be forwarded and will
ring at the fifth destination.
7. If two stations have set Call Forwarding - All Calls - CCIS to each other, an incoming call will not be for-
warded.
8. If the...

NEAX2000 IVS CCIS Features and SpecificationsPage 72NDA-24159, Issue 2
Multiple Call Forwarding - All Calls - CCIS
CALLING STATION
CCIS NETWORK
IDLEFG
Office AOffice B
CALL FORWARDING -  ALL CALLS SET
D BE
C
A
BE
C
A
CALLING STATION
CCIS NETWORK
IDLEF
G
Office B
Office A
CALL FORWARDING IS SET,  BUT FORWARDING DOES NOT OCCUR
CALL FORWARDING -  ALL CALLS SET
D 

NEAX2000 IVS CCIS Features and Specifications
NDA-24159, Issue 2
Page 73
Multiple Call Forwarding - Busy Line - CCIS
General Description
This feature allows the last hop of a Multiple Call Forwarding - Busy Line sequence to be forwarded over a
CCIS network to a station in another office.
Operating Procedure
To set Call Forwarding - Busy Line - CCIS from a Single-Line Telephone:
1. Lift the handset; receive dial tone.
2. Dial the Call Forwarding - Busy Line feature access code; receive feature dial tone....

NEAX2000 IVS CCIS Features and Specifications
Page 74Addendum-003 NDA-24159, Revision 2.3
July, 1998
Multiple Call Forwarding - Busy Line - CCIS
3. Dial the outgoing trunk access code; receive a single burst of service set tone.
4. Dial the desired target station number and receive service set tone.
(This operation is required for a network using Open Numbering Plan.)
5. Wait approximately five seconds; receive service set tone. The LED lights and the LCD displays:
6. Replace the handset or press the...

NEAX2000 IVS CCIS Features and Specifications
NDA-24159, Issue 2
Page 75
Multiple Call Forwarding - Busy Line - CCIS
7. For Multiple Call Forwarding - Busy Line service, the display on a Multiline Terminal will show the termi-
nating station number for the calling party. For the terminating station, the display on the Multiline Terminal
will show the called station number and the calling party number (station or trunk).
8.
When M
ultiple Call Forwarding - Busy Line - CCIS is used, the following...

NEAX2000 IVS CCIS Features and Specifications
Page 76NDA-24159, Issue 2
Multiple Call Forwarding - Busy Line - CCIS
BE
C
A
CALLING STATION
CCIS NETWORK
IDLEF
G
Office B
Office A
CALL FORWARDING IS SET,  BUT FORWARDING DOES NOT OCCUR
CALL FORWARDING -  ALL CALLS SET
D 

NEAX2000 IVS CCIS Features and Specifications
NDA-24159, Issue 2
Page 77
Multiple Call Forwarding - Don’t Answer - CCIS
General Description
This feature allows the last hop of a Multiple Call Forwarding - Don’t Answer sequence to be forwarded over
a CCIS network to a station in another office.
Operating Procedure
To set Call Forwarding - Don’t Answer - CCIS from a Single-Line Telephone:
1. Lift the handset; receive dial tone.
2. Dial the Call Forwarding - Don’t Answer feature access code; receive feature...

NEAX2000 IVS CCIS Features and Specifications
Page 78Addendum-003 NDA-24159, Revision 2.3
July, 1998
Multiple Call Forwarding - Don’t Answer - CCIS
3. Dial the outgoing trunk access code; receive a single burst of service set tone.
(This operation is required for a network using Open Numbering Plan.)
4. Dial the desired target station number and receive service set tone.
5. Wait approximately five seconds; receive service set tone. The LED lights and the LCD displays:
6. Replace the handset or press the...

NEAX2000 IVS CCIS Features and Specifications
NDA-24159, Issue 2
Page 79
Multiple Call Forwarding - Don’t Answer - CCIS
4. If a station transfers a call to another station with Call Forwarding - Don’t Answer - CCIS service and releases
from the connection, Recall will override Call Forwarding - Don’t Answer - CCIS if the call is unanswered
after a predetermined time.
5.Multiple Call Forwarding - Don’t Answer - CCIS will not be activated if the calling party encounters a busy
station that has activated...