NEC Itl12d1 User Guide

 223 
TO SET PREFIX NUMBERThe procedure below shows how to set Music on Hold
to be heard by DT Series user.
STEP 1: From the Home screen, click  User Setting →
Talk  →  Prefix  → Prefix 1 . 
STEP 2: Enter a prefix number.  
STEP 3: Click   button to  save the change to the
database. 
STEP  4: The following dialog appears. Click   but- ton on the dialog.
STEP 5: If multiple prefixes need to be set, repeat the above procedures. In that case, select   Prefix
2  and  Prefix 3 .Note:
A maximum of 10 digits...

 224 
TO SET CLOCK FORMATDetermines whether time is displayed with a 12-hour or
24-hour clock format.
STEP 1: From the  Home screen, click  User Setting →
Display  →  Time Format . 
STEP 2: Make a selectio n from the following list.
STEP 3: Click   button to  save the change to the
database. 
STEP  4: The following dialog appears. Click   but- ton on the dialog.
Menu Item
Meaning
1. Automatic 12-hour clock (default)
2. 12 hour Indication 12-hour clock
3. 24 hour Indication
 24-hour clock
OK
OK  

 225 
TO ENABLE/DISABLE VOLUME 
LEVEL DISPLAYDetermines whether or not to display the following
volume levels: handset receiver volume, speaker
volume, ringer tone volume and LCD contrast.
STEP 1: From the  Home screen, click  User Setting →
Display  →  Local Volume . 
STEP 2: Make a selectio n from the following list.
STEP 3: Click   button to  save the change to the
database. 
STEP  4: The following dialog appears. Click   but- ton on the dialog.Menu Item
Meaning
1. Automatic Each volume level is...

 226 
TO ENABLE/DISABLE BACKLIGHTThe following explains how to enable/disable the
backlights of LCD and digit keys.
The backlights illuminate (for approximately 10
seconds) when the user presses any key or lift the
handset.
STEP 1: From the  Home screen, click  User Setting →
Display  →  Back Light . 
STEP 2: Make a selectio n from the following list.
STEP 3: Click   button to  save the change to the
database.  STEP  4: The following dialog appears. Click   but-
ton on the dialog.Menu Item
Meaning
1....

 227 
TO CHANGE CHARACTER SIZEThe following explains how to change the displayed
character size on the LCD.
STEP 1: From the Home screen, click  User Setting →
Display  →  Font Size . 
STEP 2: Select  either  1. Standard(16dot) or 2.
Small(12dot)  by clicking the corresponding
radio button.
STEP 3: Click   button to  save the change to the
database. 
STEP  4: The following dialog appears. Click   but- ton on the dialog.
OK
OK  

 228 
TO SET A LANGUAGEThe following explains how to set a language to be
displayed on LCD.
STEP 1: From the Home screen, click  User Setting →
Display  →  Language . 
STEP 2: Select a desired language by clicking the cor- responding radio button. STEP 3: Click   button to save the change to the
database. 
STEP  4: The following dialog appears. Click   but- ton on the dialog.
OK
OK  

 229 
TO RESET TELEPHONE SETTINGSThe following explains how to clear the personal data of
the telephone.
STEP 1: From the Home screen, click  User Setting →
Display  →  Setting Reset . 
STEP 2: Click   button to clear the personal data of the telephone. 
STEP 3: The  confirmation  message appears. Click
 button on the dialog to start the data
clearing.
STEP 4: While clearing the personal data. the follow- ing message appears. STEP 5: When the data clear is complete, the follow-
ing dialog appears....