NEC Infoset 408 System Manual

InfoSet 408Issue 1A
System Manual3 - 71
Extension Name Assignment
When this feature is used, the name or number of the internal caller or the paging
originator is displayed on the called party (parties) telephone(s).  The telephones
must be equipped with an LCD for this feature to be used.
This feature is available for InfoSet and Electra Elite display telephones.
Feature Operation 
1. Press    .
2. Dial   
       .
3. Dial the extension number for the party whose name will be entered.
4. Enter the...

Issue 1AInfoSet 408
3 - 72Features
External Paging (Meet-Me)
This feature allows paging through a user-provided external speaker.  The paged
party answers by dialing a specified access code.
This feature is available for the InfoSet and Electra Elite multiline telephones and
single line telephones.
Feature Operation  
1. Lift the handset.
2. Dial the access code for the desired zone or press a one-touch key that has
been programmed with the access code.   The external paging access codes
are listed...

InfoSet 408Issue 1A
System Manual3 - 73 Associated Programming
All programming functions associated with this feature are listed in the following table.
Some functions must be programmed before the feature is operational and other
functions are optional.  The optional functions can affect how the feature operates.    
Special Conditions

When external paging is originated, a tone burst is heard from the external speaker.
A busy tone is also generated when a user attempts a page and external paging is...

Issue 1AInfoSet 408
3 - 74Features
External Tone Ringer via External Speaker
A user-provided external speaker can be programmed to ring when incoming calls are
received.  Ringing can be individually set for day mode and night mode.
Feature Operation 
1. Lift the handset or press    .
2. Press the appropriate flashing line key.
3. Answer the call.
Associated Programming
All programming functions associated with this feature are listed in the following table.
Some functions must be programmed before the...

InfoSet 408Issue 1A
System Manual3 - 75
Flash Key
If a system is connected to a PBX, it can be programmed to transfer the PBX call to
the system using a flash signal.  The duration of the flash signal is assigned in system
programming.
This feature is available for the InfoSet and Electra Elite multiline telephones.
Feature Operation 
1. Press      (for InfoSet telephones) or(for Electra Elite telephones).
2. Hang up, the call is transferred.
Associated Programming
All programming functions associated...

Issue 1AInfoSet 408
3 - 76Features
Flexible Line Key
The line keys on the multiline telephones are designed for flexibility of use.  Line keys
that are not used to access external lines can be assigned for:

speed dialing

one-touch/feature access key operation for seizing internal of external telephone
lines

dialing access codes that are used to set/cancel features such as microphone on/off
and headset on/off. 
This feature is available for InfoSet and Electra Elite multiline telephones.
Feature...

InfoSet 408Issue 1A
System Manual3 - 77
Flexible Numbering Plan
This feature allows extension numbers to be changed to meet individual customer’s
needs.  When the system is first turned on, the system automatically assigns default
extension numbers.  As necessary, these settings can be changed in system
programming.
This feature is available for the InfoSet and Electra Elite multiline telephones and
single line telephones.
Feature Operation 
Associated Programming
All programming functions associated...

Issue 1AInfoSet 408
3 - 78Features
Flexible Ringing Assignment
External calls can be programmed to ring at specified telephones or to an external
speaker.  Separate day and night ringing assignments can also be specified in
programming.
This feature is available for InfoSet and Electra Elite multiline telephones and single
line telephones.
Feature Operation 
Associated Programming
All programming functions associated with this feature are listed in the following table.
Some functions must be programmed...

InfoSet 408Issue 1A
System Manual3 - 79
Flexible Timeout
Flexible Timeouts are the system defaults for a variety of times selections.  These
preset values allow the system to operate without any initial program changes.  Many
of these values can be changed in system programming to meet individual user
specifications.
Feature Operation 
The flexible timeout table provides a list of the timers that can be programmed in the
system.  The timer, the definition and the timer value are provided in the table....

Issue 1AInfoSet 408
3 - 80Features
CO Ring Transfer Recall Timer 
Selection
FixedSpecifies the interval from the time a 
telephone user transfers an incoming 
call until the time the destination 
telephone user does not respond.  When 
there is no response, the timer expires 
and an alarm is generated at the 
transferring user ’s telephone.30 sec
CO/PBX DTMF Duration/
Interdigit Assignment
110 – Touchtone Signal 
Duration and Pause IntervalSpecifies the tone duration and interdigit 
time when DTMF...