NEC Conference 911 Installation Guide

NDA-30133 Revision 1.0Page 53
Conference 911 Installation Guide Installing the C911 Client
4. Select the I want to search my system for existing Virtual Machines option.
The Searching for VMs dialog box is displayed.
Figure 6-3   Searching for VMs dialog box
The installation program searches for installed virtual machines and displays 
the installed virtual machines in the window.
Select the pathname of the Java Virtual machine, then click OK. 
For example, select “c:\Program...

Page 54NDA-30133 Revision 1.0
Installing the C911 Client Conference 911 Installation Guide
Figure 6-4   Installing Application progress indicator
5. When the virtual machine installation is complete, as shown in Figure 6-5, 
click OK.
Figure 6-5   Installation Complete
The Welcome dialog box is displayed. 

NDA-30133 Revision 1.0Page 55
Conference 911 Installation Guide Installing the C911 Client
Figure 6-6   Welcome dialog box
6. Click Next.
The Choose Destination Directory dialog box is displayed
.
Figure 6-7   Choose Destination Directory dialog box 

Page 56NDA-30133 Revision 1.0
Installing the C911 Client Conference 911 Installation Guide
7. Do one of the following:
Type the desired pathname in the Primary Destination Directory field, then 
click Install.
Click Browse. 
The Primary Destination dialog box is displayed.
Figure 6-8   Primary Destination dialog box
Select the path from the available folders. Click OK when finished.
The dialog box closes and the Choose Destination Directory dialog box is 
displayed with the pathname in the Primary...

NDA-30133 Revision 1.0Page 57
Conference 911 Installation Guide Installing the C911 Client
Figure 6-9   Installing Files progress indicator
8. When the installation program is finished, the Installation Complete dialog box 
is displayed. 
Figure 6-10   Installation Complete dialog box 

Page 58NDA-30133 Revision 1.0
Installing the C911 Client Conference 911 Installation Guide
9. Click Finish. 
The C911 Client is now installed. Refer to the Conference 911 User Guide for more 
information about the C911 Client application. 

NDA-30133 Revision 1.0Page 59
Conference 911 Installation Guide Running the C911 Package
Chapter 7 Running the C911 Package
Overview
This chapter details how to test, initialize, and terminate the C911 system, in addition 
to the limitations of the applications.
Initializing C911 
C911 must be initialized through the APM Operations Menu according to instructions 
provided in the APM Operations Manual. Although each of the configured applications 
is initialized individually, the C911 Monitor should be...

Page 60NDA-30133 Revision 1.0
Running the C911 Package Conference 911 Installation Guide
Testing C911
After installing and configuring the C911 system, you should perform tests to ensure 
that all C911 applications are functioning correctly. 
If the main NEAX2400 is using CCIS to get to another PBX, you can set up two or three 
trunks to be used for calls to a specific PBX or set of stations. The C911 Monitor 
application can then monitor these trunks instead of the real 911 trunks. Using this 
method,...

NDA-30133 Revision 1.0Page A-1
Conference 911 Installation Guide Software Limitations
Appendix A Software Limitations
Overview
This section specifies the limitations and service conditions of the Conference 911 
system. 
Service Conditions
The following are some service conditions found in the C-911 applications.
Conferencing with C-911 agent is not available when an attendant console calls 
911.
Conferencing with C-911 agent is not available during a screened transfer to 
911. A Screened Transfer to...

Software Limitations Conference 911 Installation Guide
Page A-2NDA-30133 Revision 1.0
This Page Left Blank.