NEC Conference 911 Installation Guide

NDA-30133 Revision 1.0Page 13
Conference 911 Installation Guide Installing the C911 Server Software
Figure 3-4   Release Media Device menu
4. Type F and press Enter to choose the Floppy Disk Device.
The Installation Procedure screen is displayed, prompting you to insert the C911 
installation diskette in the floppy disk device.
Figure 3-5   Insert C911 Disk prompt
5. Insert the disk labeled “C911 Server Release 3.0” into the floppy disk device and 
press Enter.
The screen displays the status of the...

Page 14NDA-30133 Revision 1.0
Installing the C911 Server Software Conference 911 Installation Guide
Figure 3-6   Processing C911 Installation Files
When all the files from the disk have been installed, the prompt “Has all the 
release media been loaded [y or n]?” is displayed.
6. Type y at the prompt and press Enter.
Figure 3-7   Root Password prompt
The prompt “Password” is displayed for you to enter the root (Super User) 
password. 
7. Type the root password and press Enter.
The APM installation...

NDA-30133 Revision 1.0Page 15
Conference 911 Installation Guide Installing the C911 Server Software
Figure 3-8   Configure Monitor prompt
The screen indicates the status of the installation as it defines the database files 
and processes the installation files. You will see messages indicating that the 
databases are defined.
Note:If there is a problem with the files during C911 installation, the message 
“Validation error, OAI installation failed” is displayed.
When the installation is complete, “C911...

Page 16NDA-30133 Revision 1.0
Installing the C911 Server Software Conference 911 Installation Guide
Installing the Message Server
To install the Message Server software, you must use a UNIX terminal to access the 
APM. (For more information about the general installation process, refer to the APM 
Operations Manual.)
Use the following steps to install the Message Server software:
Figure 3-9   APM Administration Main menu
1. From the APM Administration Main menu, type i at the prompt and press Enter to...

NDA-30133 Revision 1.0Page 17
Conference 911 Installation Guide Installing the C911 Server Software
2. Type applications at the prompt and press Enter.
The “Enter Release Media Device” prompt is displayed: 
Figure 3-11   Release Media Device menu
3. Type F and press Enter to choose the Floppy Disk Device.
The Installation Procedure screen is displayed, prompting you to insert the 
Message Server installation diskette in the floppy disk device.
Figure 3-12   Insert Message Server Disk prompt
4. Insert the...

Page 18NDA-30133 Revision 1.0
Installing the C911 Server Software Conference 911 Installation Guide
Figure 3-13   Processing Message Server Installation Files
When all the files from the disk have been installed, the prompt “Has all the 
release media been loaded [y or n]?” is displayed.
5. Type y at the prompt and press Enter.
Figure 3-14   Root Password prompt
The prompt “Password” is displayed for you to enter the root (Super User) 
password. 
6. Type the root password and press Enter.
The APM...

NDA-30133 Revision 1.0Page 19
Conference 911 Installation Guide Installing the C911 Server Software
Figure 3-15   Installing Message Server Files
The prompt “Press enter key to re-run /etc/inittab (using “init q” command), 
otherwise press CTRL-C.” is displayed. 
7. Press Enter.
The screen indicates the status of the installation as the installation files are 
processed. 
Note:If there is a problem with the files during the Message Server installation, the 
message “Validation error, OAI installation...

Page 20NDA-30133 Revision 1.0
Installing the C911 Server Software Conference 911 Installation Guide
Installing the Beeper Interface
To install the Beeper Interface software, you must use a UNIX terminal to access the 
APM. (For more information about the general installation process, refer to the APM 
Operations Manual.)
Use the following steps to install the Beeper Interface software:
Figure 3-17   APM Administration Main menu
1. From the APM Administration Main menu, type i at the prompt and press...

NDA-30133 Revision 1.0Page 21
Conference 911 Installation Guide Installing the C911 Server Software
2. Type applications at the prompt and press Enter.
The “Enter Release Media Device” prompt is displayed: 
Figure 3-19   Release Media Device menu
3. Type F and press Enter to choose the Floppy Disk Device.
The Installation Procedure screen is displayed, prompting you to insert the Beeper 
Interface installation diskette in the floppy disk device.
Figure 3-20   Insert Beeper Interface Disk prompt
4. Insert...

Page 22NDA-30133 Revision 1.0
Installing the C911 Server Software Conference 911 Installation Guide
Figure 3-21   Processing Beeper Interface Installation Files
When all the files from the disk have been installed, the prompt “Has all the 
release media been loaded [y or n]?” is displayed.
5. Type y at the prompt and press Enter.
The APM installation procedures begin processing the Beeper Interface 
installation files. 
Figure 3-22   Beeper Pre-Install Script
The prompt “Would you like to upgrade? (y or...