NEC Conference 911 Installation Guide

NDA-30133 Revision 1.0Page 23
Conference 911 Installation Guide Installing the C911 Server Software
6. Type n and press Enter.
Figure 3-23   Root Password prompt
The prompt “Password” is displayed for you to enter the root (Super User) 
password. 
7. Type the root password and press Enter.
The Beeper Installation files are processed. The screen indicates the status of the 
installation as the installation files are processed. 
Note:If there is a problem with the files during the Beeper Interface...

Page 24NDA-30133 Revision 1.0
Installing the C911 Server Software Conference 911 Installation Guide
Installing the C911 Client Software
You can install the C911 Client software on the UAP to facilitate installing the software 
on each C911 Client workstation. To install the C911 Client software, you must use a 
UNIX terminal. (For more information about the general installation process, refer to 
the APM Operations Manual.)
Use the following steps to install the C911 Client software to the UAP:
Figure...

NDA-30133 Revision 1.0Page 25
Conference 911 Installation Guide Installing the C911 Server Software
2. Type applications at the prompt and press Enter.
The “Enter Release Media Device” prompt is displayed: 
Figure 3-27   Release Media Device menu
3. Type F and press Enter to choose the Floppy Disk Device.
The Installation Procedure screen is displayed, prompting you to insert the C911 
Client installation diskette in the floppy disk device.
Figure 3-28   Insert C911 Disk prompt
4. Insert the disk labeled...

Page 26NDA-30133 Revision 1.0
Installing the C911 Server Software Conference 911 Installation Guide
5. When all files from Disk 1 have been installed, the prompt “Has all the release 
media been loaded [Y or N]?” is displayed. 
Figure 3-29   Processing C911 Installation Files
Type n at the prompt and press Enter.
6. Insert the disk labeled “C911 Client Release 3.0 disk 2 of 2” into the floppy disk 
device and press Enter.
The screen displays the status of the application files as they are installed....

NDA-30133 Revision 1.0Page 27
Conference 911 Installation Guide Installing the C911 Server Software
8. Type the root password and press Enter.
The C911 Client Installation files are processed. The screen indicates the status of 
the installation as the installation files are processed. 
Figure 3-31   C911 Client Software Installation Complete prompt
Note:If there is a problem with the files during C911 Client software installation, the 
message “Validation error, OAI installation failed” is displayed....

Page 28NDA-30133 Revision 1.0
Installing the C911 Server Software Conference 911 Installation Guide
Installing the Web Server
The UAP with the SCO OpenServer 5 Operating System should be configured with the 
Netscape FastTrack Web Server. The main web page of the Netscape FastTrack Web 
Server should be set to the /oai/internet directory. OAI applications use the /oai/
internet directory to keep all of the web-based installation applications and 
instructions. 
Some of the earlier UAPs with the SCO...

NDA-30133 Revision 1.0Page 29
Conference 911 Installation Guide Installing the C911 Server Software
Install the Java Runtime Environment
The C911 Client and the Web Server require the Java 2 Runtime Environment. Use the 
following steps to install the Java 2 Runtime Environment software:
Figure 3-32   APM Administration Main menu
1. From the APM Administration menu, type u at the prompt and press Enter to get 
to the UNIX prompt. 
2. At the UNIX prompt, type cd /oai/internet to connect to the web server...

Page 30NDA-30133 Revision 1.0
Installing the C911 Server Software Conference 911 Installation Guide
4. Insert the second disk (2 of 5) labeled “Java Runtime Environment” into the 
floppy disk device and type tar -xv to extract the code from this diskette.
The “tar” command will show that this file is divided over four separate 
diskettes. After tar has finished processing this disk, you will be prompted to 
insert the next floppy disk. 
5. When prompted, insert disk 3 and press Enter. 
After tar has...

NDA-30133 Revision 1.0Page 31
Conference 911 Installation Guide Application Configuration
Chapter 4 Application Configuration
This chapter contains the information that you will enter to configure C911. You 
can configure the applications after installing the C911 software, as shown in 
Chapter 3. (See “Installing the C911 Server Software” on page 11). C911 includes 
the following applications:
C911 Monitor - manages communications among internal processes, agent 
stations, beepers, and the NEAX2400....

Page 32NDA-30133 Revision 1.0
Application Configuration Conference 911 Installation Guide
Figure 4-2   APM Administration Main menu
2. Type a at the prompt and press Enter to choose the APM option. Enter the 
password when prompted.
The APM System Administration menu is displayed.
Figure 4-3   APM System Administration menu
3. Choose the Application Configuration option from the System 
Administration menu.
Once you are in the Application Configuration mode, you can check the 
parameters set up in the...