Namco World Kicks Operators Manual

Page 31
2. HOW TO PLAY
This is a soccer game, which is played using analogue joysticks and a ball as input
devices. Up to 4 people can play on one machine, and up to 8 people can play using
two machines interconnected. (Interconnection facilities are an optional extra). When a
single player plays, the player competes against the CPU in a tournament, while
multiple players can either compete against each other in two teams (Player mode) or
compete together against the CPU (CPU mode).
Controls
1.Joystick...

Page 32 6. In Player mode, the teams compete to score against each other. The winners go
on to compete against the CPU, or the losing team have the option to begin a
new match depending on the setting of the ‘Game Option Return Match Setting’.
(This option is set in Test mode)
Return Match = OFF: Winner in player mode goes on to compete in CPU mode.
Return Match = ON: Loser in player mode can resume a new match against the
winner.
7. Players can join in a game midway even when other players are already...

Page 33
3. MAJOR COMPONENTS
Ball Kicker AssySpeaker Assy Monitor CabinetMonitor Assy Header Assy
Play Panel Assy
Joystick Assy
Coin Door Assy 

Page 34
4. MOVING THE MACHINE
This equipment is fitted with castors to make it easier to move. Take care when 
moving the equipment on an inclined floor.
The overall height of this equipment is 2280mm. Take care of any overhead 
obstructions. (e.g. Light Fittings, Electric Cables etc.)
WARNING • NEVER turn the power to the machine ON until installationhas been completed.
WARNING • In order to prevent possible electric shocks, be sure that the machine is connected to the mains with a securely connected...

Page 35

DIESES GERÄT IST NUR FÜR DIE GEWERBLICHE AUFSTELLUNG IN
GESCHLOSSENEN RÄUMEN BESTIMMT.
DAS GERÄT DARF AN FOLGENDEN PLÄTZEN NICHT AUFGESTELLT WERDEN
1. Im Freien.
2. In direktem Sonnenschein, an extrem feuchten und staubigen Plätzen, an Plätzen mit
Wasseranschlüssen und möglichen Leckagen, nahe Klima- und Heizungsanlagen, an
Plätzen mit extrem hohen oder niedrigen Temperaturen.
3. In der Nähe von Notausgängen oder Feuerlöschgeräten.
4. An unstabilen Plätzen oder Plätzen mit übermäßiger...

Page 36





DENNE MASKINEN ER BARE KONSTRUERT FOR INNENDØRS BRUK
IKKE INSTALLER MASKINEN PÅ FØLGENDE PLASSER.
1. Utendørs
2. Konstant sollys, plasser med mye fuktighet og støv, plasser hvor det er vannlekasje,
nære luft kjølere eller varme elementer, plasser med overdreven høy eller lav temperatur.
3. Plasser hvor det vill stå i veien for nødutganger eller brannslukking utstyr.
4. Ustabile plasser eller plasser med overdreven vibrasjon.
5. Plasser som ikke er i vater.
 DEZE MACHINE IS ALLEEN VOOR...

Page 37


 	
ESTA MAQUINA FOI CONCEBIDA PARA UTILIZAÇÃO EM ESPACOS
INTERIORES APENAS
NÃO INSTALAR A MAQUINAS NOS SEGUINTES LOCAIS:-
1. Exteriores.
2. `Luz solar directa, locais com humidade excessiva ou pó, locais aonde existam fugas de
água perto de ar condicionados ou equipamentos calorificos e locais com temperaturas
excessivamente quentes ou frias.
3. Locais aonde ficaria colocada no caminho de saidas de emergência ou equipamentos
extintores de fogo.
4. Locais estruturalmente instaveis ou locais com...

Page 38 5-1 Fitting the Header Assembly
The Header Assembly has a forward centre of gravity, so it is important that at
least 
two people are used to fit or remove the Header Assembly.
The fitting position of the Header Assembly is high, and it is important that a
means of reaching the height safely, without stretching, is available. (e.g. Steps,
Step Stool etc.)
1. Place the Header Assy on to the Monitor Cabinet and slide the Header Assy
backwards so that the Header Support Tube engages under the...

Page 39 5-2 Fitting the Kicker Cabinet to the Monitor Cabinet
1. Remove 5off security screw (M6x20) and remove the Extension Cover from the
Monitor Cabinet.
2. Fit the Speaker Pods to the Monitor Cabinet using 8off (4ea Pod) hex head
screws (M6x60), complete with spring washer, and connect the Speaker Pod
connectors.
Security screw (M6x20)
Extension cover
Security screw (M6x20)
Monitor cabinet
Speaker PodHex head screw (M6x60)
with spring washer 

Page 40 3. Fit the Joint Brackets as shown below using the 4off hex head screws (M8x35)
with spring washer.
4. Refit the Extension Cover using 5off security screw (M6x20).
Joint bracketsHex head screw
(M8x35)
with spring washer Hex head screw
(M8x35)
with spring washer