Namco Race On Operators Manual

Page 51 6-3-3-4 Camera Check
1. Select ‘CAMERA CHECK’ from the I/O Test Screen. The following
screen is displayed:-
•In the CAMERA CHECK Screen, the current view of the camera is
displayed in the centre box.
(a) MIRROR/PHOTO
By pressing the Brake Pedal or Service Switch, the image from the
camera is frozen on the screen and the word MIRROR, just below the
image box, changes to PHOTO. This is the mage that would be used
during the game.
Pressing the Brake Pedal or Service Switch again reverts back to...

Page 52 (c) TINT ADUST
This setting is used to adjust the colour tint of the image.
The colour tint of the image is automatically adjusted to the optimum
value by the system, but this item allows the colour tint level to be set
manually.
Select this item and press the ENTER button. Use the Select UP/DOWN
switch to increase or decrease the red tint. The red tint can be increased
or decreased by three levels each.
Press the ENTER button to store the new setting and to exit this mode.
(d) V POSITION
This...

Page 53 6-3-4 Monitor Test
1. Select “MONITOR TEST” on the menu screen to test and adjust the
Monitor. The following screen is displayed.
2. Use the Select Up/Down switch to choose the required item then press
the Enter button. To return to the Monitor Test Menu from a test pattern
press the Enter button.
3. Select “EXIT” and press the Enter button to return to the menu screen.
Note:   Items (c) and (i) are not used on this game.
MONITOR TEST
GRADATION PATTERN..................................... (a)...

Page 54 6-3-5 Sound Test
1. Select “SOUND TEST” on the menu screen to test the audio and adjust
the volume settings. The following screen is displayed.
2. Use the Select Up/Down switch to choose the required item then press
the Enter button.
3. Use the Up/Down switch to change the setting.
4. Press the Enter button to return to item select mode
4. Select “EXIT” and press the Enter button to return to the menu screen.
SOUND TEST

GAME VOLUME
AUTO SETTING............................................. (a)...

Page 55 (a) AUTO SETTING
The volume levels of all speakers will be adjusted at the same time
with the balance between front and rear speakers being set
automatically.
(b) FRONT L&R SP
The volume levels for both front speakers will be adjusted together.
(c) FRONT L SP [0~64, DEFAULT = 40]
The volume level for the front left speaker only will be adjusted.
(d) FRONT R SP [0~64, DEFAULT = 40]
The volume level for the front right speaker only will be adjusted.
(e) REAR L&R SP
The volume levels for both rear...

Page 56
6-3-6 ADS Data
By selecting ADS Data from the menu screen, all of the bookkeeping 
details can be read and/or reset.
6-3-7 Others 1. Select “OTHERS” on the menu screen. The following screen is displa\
yed. 
2. Use the Select Up/Down switch choose the required item then press the Enter button.
3. Select “EXIT” and press the Enter button to return to the menu scr\
een. 
(a,) Displays game software version. 
(b) The current time is displayed (the time cannot be reset)
(c) Used to test the PCB. (this...

Page 57
7. INITIALIZATION
Adjustments when Replacing Parts
The following operation 
must always be performed after replacing the Game
PCB, Rom, or Control Potentiometers.
The game will not operate correctly if these adjustments are not made.
1. Slide the TEST switch ON while pressing the SERVICE switch . The
following screen is displayed.
2. Ensure that the steering wheel is set to its centre position and both the
accelerator and brake pedals are released.
3. Press the Service Switch to reset the the...

Page 58
8. MAINTENANCE
G GG G
GAdjustment or maintenance on this machine should be carried out by
qualified personnel only.
Ensure that the 
POWER to the machine is turned OFF before
commencing any maintenance work. (Trouble shooting, service or
repairs etc.)
D DD D
DEinstellungen und Wartung des Gerätes dürfen nur von dafür
qualifiziertem Fachpersonal vorgenommen werden.
Vor Beginn aller Wartungsarbeiten (Fehlersuche, Reparaturen etc.)
muß der Netzstecker gezogen werden.
c cc c
cJusteringer eller...

Page 59
O OO O
OAanpassingen of onderhoud aan deze machine dient alleen
uitgevoerd te worden door bekwaam personeel.
Zorg ervoor dat de machine UITgeschakeld is voordat er enig
onderhoudswerk wordt verricht (troubleshooting, reparaties etc.)
P PP P
PAfinações ou manutenção nesta maquina, deverão ser efectuadas
sómente por pessoal qualificado.
Certifique-se que a maquina se encontra desligada sempre que
iniciar qualquer tipo de trabalho de manutenção. (identifação de
avarias, reparação etc.)
S SS S...

Page 60 8-1 Replacing the Steering PCB and/or Fuse
1. Remove 2off security screw (M5x12) and lower the steering PCB tray.
2. Replace the fuse.
OR
3. Disconnect the connectors.
4. Replace the steering PCB.
5. Raise the steering PCB door and refit the 2off security screw (M5x12).