Namco Race On Operators Manual

Page 41
Linking Three Games
Linking Four Games 

Page 42
6. ADJUSTMENTS
6-1 Turning on the Power
After the machine has been installed, turn ON the power. The power
switch is located on the rear of the monitor cabinet.
G GG G
GAdjustment or maintenance on this machine should be carried out by
qualified personnel only.
D DD D
DEinstellungen und Wartung des Gerätes dürfen nur von dafür
qualifiziertem Fachpersonal vorgenommen werden.
l ll l
lJusteringer eller vedligehold af denne maskine bør kun udføres af
kvalificeret personale.
E EE E
ELos ajustes y el...

Page 43
6-2 Adjustment Switches
The Adjustment switches are located inside the coin door. 
1. Service Switch. Press this switch to obtain game credits without incrementing the play 
meter.
2. Test Switch Slide the test switch ON to enter test mode.
Test mode allows testing and the changing of game settings. (Refer to
section 6-3  Test Mode page  44)
3. Select Up/Down Switch This switch is used to select the test required when in the Test Mode.
4. Enter Switch This switch is used to enter a selected test...

Page 44 6-3 Test Mode
1. Open the coin door and slide the test switch “ON”. The “Menu Screen” will
be displayed on the monitor.
2. Select the test required by using the select up/down switch. The colour of
the selected test will change.
3. Activate the test by pressing the Enter switch. Select “EXIT” in each test
to return to the “Menu Screen”.
4. After testing is completed, slide the test switch to the “OFF” position to
return to normal game mode.
The Test Switch must always be in the “OFF” position for...

Page 45 6-3-1 Coin Options
1. Select “COIN OPTIONS” on the menu screen to set the game cost
and related settings. The following screen is displayed.
2. Use the Select Up/Down switch choose the required item then press
the Enter button.
3. Use the Select Up/Down switch to change the setting.
4. Select “EXIT” and press the Enter button to return to the menu
screen.
Note:- The price of play on this machine is set within the Cashflow Coin Mech.
Ensure that the Game Cost is set to 1 Coin 1 Credit.
COIN...

Page 46 6-3-2 Game Options
1. Select “GAME OPTIONS” on the menu screen to set the game
variables, the following screen is displayed.
2. Use the Select Up/Down switch to choose the required item then
press the Enter button.
3. Use the  to Select Up/Down switch to change the setting.
4. Select “EXIT” and press the Enter button to return to the menu
screen.
GAME OPTIONS [1/2]
[DEFAULT IN GREEN]
PCB ID. RED 1
LINK ON O4 +1............................... (a)
ENTRY WAIT 20 SEC..................................

Page 47
m e t Ino i t p i r c s e D
t l u a f e D
) a (DI n o i t i s o p r e y a l p s t e S, 4 K C A L B , 3 W O L L E Y , 2 N E E R G , 1 D E R
8 K C A L B , 7 W O L L E Y , 6 N E E R G , 5 D E R1 D E R
2 N E E R G
) b (s r e y a l p r e h t o r o f s d n o c e s n i e m i T
. t r a t s e m a g e r o f e b e m a g n i o j o t0 2
) c (n i a t n u o M r o f s p a l f o r e b m u N
. e s r u o C8 ~ 2 e l b a t t e s4
) d (k r a P e m e h T r o f s p a l f o r e b m u N
. e s r u o C8 ~ 2 e l b a t t e...

Page 48
6-3-3 I/O Test
1. Select “I/O TEST” on the menu screen to test the switches and lamp\
s. The following screen is displayed.
2. Use the Select Up/Down switch to choose the required item then press the Enter button to enter the test.
3. Select “EXIT” and press the Enter button to return to the menu scr\
een. 
(a) Shows the condition of the DIP Switches on the PCB. In normal operation all switches are OFF. (If a switch is ON, it will be displayed in red.)
(b)  Shows how many players are linked and...

Page 49
6-3-3-1 I/O PCB Check
1. Select ‘I/O PCB CHECK’ from the I/O Test Screen. The following screen is displayed:-
Note: This screen is for information only . No adjustments are available.
6-3-3-2 How to [I/F Initialize]
Select ‘How to [I/F Initialize]’ from the I/O Test menu. The following 
screen is displayed.
Note: Initialization cannot be executed from this screen.  (see 7 page 57)
I/O TEST
DIP 4
12345678 [ON=RED]
LINKON 2
HOW TO [I / F INITIALIZE] 
***********************
* I / F INITIALIZE *
*...

Page 50
6-3-3-3 Switch Test
1. Select “Switch Test” on the I/O menu screen to test the switches.The following screen is displayed.
2. The display shows the current state of the switches. 
3. Press the Up Select switch and the Enter switch together to EXIT and return to the I/O menu screen
(a) Not Used
(b to f) Display will change from OFF to ON each time a switch is operated.
(g) Numbers increase when the steering is turned to the right and decrease when turned to the left. Right OK and Left OK is...