Namco Final Furlong Operators Manual

Page 42 5-5 Linking Games
1. When a single machine is to be used as a two player linked game, the link
cable supplied must be fitted to the link connectors on the rear of the
machine. Failure to fit the link cable will prevent the two game PCBs from
communicating.
2. To fit the link cable, remove the pozi head screw (M5x12) and remove the
link cover.
3. Fit the link cable, refit the link cover and secure with the pozi head screw
(M5x12) 

Page 43
4. When two machines are to be used as a four player game, both of the link\
cables supplied must be used to connect the two machines together.
5 . Refer to  section 6-3-2  page 47 to set the PCB ID. Failure to set the
correct ID will prevent the games operating in link mode. 

Page 44
6. ADJUSTMENTS
G GG G
GAdjustment or maintenance on this machine should be carried out by
qualified personnel only.
D DD D
DAufstellung, Service, Einstellung und Wartung dürfen nur von dafür
qualifiziertem Fachpersonal durchgeführt werden.
l ll l
lJusteringer eller vedligehold af denne maskine bør kun udføres af
kvalificeret personale.
E EE E
ELos ajustes y el mantenimiento de esta máquina deben ser realizados
sólo por personal cualificado.
F FF F
FL’installation, le service, le réglage, ou la...

Page 45
6-2 Adjustment Switches
The Adjustment switches are located inside the coin door. 
1. Service Switch. Press this switch to obtain game credits without incrementing the play 
meter.
2. Test Switch Slide the test switch ON to enter test mode.
Test mode allows testing and the changing of game settings. (Refer to
section 6-3  Test Mode page  45)
3. Select Up/Down Switch This switch is used to select the test required when in the Test Mode.
4. Enter Switch This switch is used to enter a selected test...

Page 46 6-3 Test Mode
1. Open the coin door and slide the test switch “ON”. The “Menu Screen” will
be displayed on the monitor.
2. Select the test required by using the select up/down switch. The colour of
the selected test will change.
3. Activate the test by pressing the Enter switch. Select “EXIT” in each test
to return to the “Menu Screen”.
4. After testing is completed, slide the test switch to the “OFF” position to
return to normal game mode.
The Test Switch must always be in the “OFF” position for...

Page 47 6-3-1 Coin Options
1. Select “COIN OPTIONS” on the menu screen to set the game cost
and related settings. The following screen is displayed.
2. Use the Select Up/Down switch choose the required item then press
the Enter button.
3. Use the Enter button to change the setting.
4. Select “EXIT” and press the Enter button to return to the menu
screen.
Note:- The price of play on this machine is set within the Cashflow Coin Mech.
Ensure that the Game Cost is set to 1 Coin 1 Credit.
COIN OPTIONS

GAME...

Page 48 6-3-2 Game Options
1. Select “GAME OPTIONS” on the menu screen to set the game
variables. the following screen is displayed.
2. Use the Select Up/Down switch choose the required item then press
the Enter button.
3. Use the Enter button to change the setting.
4. Select “EXIT” and press the Enter button to return to the menu
screen.
GAME OPTIONS 1/2

PCB ID 1.................................. (a)
HORSE TYPE 1.................................. (b)
DIFFICULTY NORMAL.....................................

Page 49
M E T INO I T P I R C S E DTE S Y R O T C A F
D I B C P ) a (4- 1 e l b a t t e s - - - - r e b m u n r e y a l p o t r e b m u n B C P s t e S2/ 1
e p y T e s r o H ) b (4- 1 e l b a t t e s - - - - e m a n y l i m a f e s r o h s t e S2/ 1
y t l u c i f f i D ) c (DR A H - L A M R O N - Y S A E y t l u c i f f i d y a l p e m a g s t e SLA M R O N
t s a c d a o r B ) d (ff O / n O - - - - e c a r g n i r u d y r a t n e m m o CNO
t c a r t t A n i d n u o S ) e (FF O / N O e d o m t c a r t t a...

Page 50
6-3-3 I/O Test
1. Select “I/O TEST” on the menu screen to switches and lamps. The following screen is displayed.
2. Use the Select Up/Down switch choose the required item then press the Enter button.
3. Use the Enter button to change the setting. 
4. Select “EXIT” and press the Enter button to return to the menu scr\
een.
I/O TEST
DIP 12345678 .................................. (a)
LINK ON 1 .................................. (b)
SWITCH .................................. ( c )
LAMP OFF...

Page 51
6-3-3-1 Switch Test
1. Select “Switch Test” on the I/O menu screen to test the switches. The following screen is displayed.
2. The display shows the current state of the switches. 
3. Press the Up Select switch and the Enter switch together to EXIT and return to the I/O menu screen
(i) If the test switch is turned OFF during this test, the game will return to normal game mode.
(ii) to (vii) The display will change from OFF to ON as each switch is operated.
(viii) When the head is turned to the...