Multi-Tech Systems Mvp-2400/2410/3010, Mvp-210/410/810 Voice/ip Gateways S000249C User Guide

MultiVOIP User Guide Warranty, Service, & Tech Support
391
For out-of-warranty repair charges, go to www.
multitech.com/documents/warranties
Extended two-year overnight replacement service agreements are
available for selected products. Please call MTS at (888) 288-5470,
extension 5308, or visit our web site at
www.multitech.com/programs/orc
for details on rates and coverages.
Please direct your questions regarding technical matters, product
configuration, verification that the product is defective,...

Warranty, Service, & Tech Support MultiVOIP User Guide
392
Technical Support
Multi-Tech Systems has an excellent staff of technical support personnel
available to help you get the most out of your Multi-Tech product.  If
you have any questions about the operation of this unit, or experience
difficulty during installation you can contact Tech Support via the
following:
Contacting Technical Support
Country By E-mail By telephone
[email protected](33) 1-64 61 09
81
India support@...

393
Chapter 12: Regulatory Information 

Regulatory Information MultiVOIP User Guide
394
EMC, Safety, and R&TTE Directive Compliance
The CE mark is affixed to this product to confirm compliance with the
following European Community Directives:
Council Directive 89/336/EEC of  3 May 1989 on the approximation of the
laws of Member States relating to electromagnetic compatibility,
and
Council Directive 73/23/EEC of  19 February 1973 on the harmonization of
the laws of Member States relating to electrical equipment designed for use
within certain...

MultiVOIP User Guide Regulatory Information
395
Warning: Changes or modifications to this unit not expressly approved
by the party responsible for compliance could void the user’s authority
to operate the equipment.
Industry Canada
This Class A digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulations.
Cet appareil numérique de la classe A
respecte toutes les exigences du
Reglement Canadien sur le matériel brouilleur.
FCC Part 68 Telecom
1. This equipment...

Regulatory Information MultiVOIP User Guide
396
may request you to remove the equipment form t network until the
problem is resolved.
7. No repairs are to be made by you. Repairs are to be made only by
Multi-Tech Systems or its licensees. Unauthorized repairs void
registration and warranty.
8.  Manufacturer:                           Multi-Tech Systems, Inc.
  Trade name:                           MultiVOIP
  Model number:                            MVP2400
  FCC registration number:       US:...

397
Appendix A: Expansion Card
Installation
(MVP24-48 & MVP30-60) 

T1/E1 Expansion Cards MultiVOIP User Guide
398
Installation
Both the MVP2410 and the MVP3010 use the same mechanical chassis.
This chassis accommodates a second MultiVOIP circuit card or
motherboard module.  The add-on module for the MVP2410 is the
MVP24-48 product; the add-on module for the MVP3010 is the MVP30-
60 product.
To install an expansion card into an MVP2410 or MVP3010, you must:
1. Power down and unplug the MVP2410/3010 unit.
2. Using a Phillips or star-bit screwdriver, remove the blank plate...

MultiVOIP User Guide T1/E1 Expansion Cards
399
Power Cable
Molex Connector
Figure A-2:  MVP2410/3010 Chassis (top/rear view)
4. While keeping the power cable out of the way, fit the MVP24-48 or
MVP30-60 card into the grooves of the expansion slot.  Push it in far
enough to allow connection of the power cable to the receptacle on the
vertical plate of the expansion card.  (See Figure A-2.)  Connect the
power cable.
5. Push the expansion card fully into the chassis.  See Figure A-3.
Figure A-3: Sliding...

T1/E1 Expansion Cards MultiVOIP User Guide
400
Operation
The MVP2410/3010 front panel has two sets of identical LEDs.  In the
MVP2410/3010 without an expansion card, only the left-hand set of
LEDs is functional.  However, when the MultiVOIP unit has been
upgraded with an MVP24-48 or MVP30-60 expansion card, the right-
hand set of LEDs will also become active.
Remember that the expansion card must be configured as though it
were simply another complete MultiVOIP unit:  it requires its own
T1/E1 line; it...