Home
>
Multi-Tech Systems
>
Communications System
>
Multi-Tech Systems Mvp-2400/2410/3010, Mvp-210/410/810 Voice/ip Gateways S000249C User Guide
Multi-Tech Systems Mvp-2400/2410/3010, Mvp-210/410/810 Voice/ip Gateways S000249C User Guide
Here you can view all the pages of manual Multi-Tech Systems Mvp-2400/2410/3010, Mvp-210/410/810 Voice/ip Gateways S000249C User Guide. The Multi-Tech Systems manuals for Communications System are available online for free. You can easily download all the documents as PDF.
Page 351
MultiVOIP User Guide Operation and Maintenance
351
Once the updated firmware has been located, it can be downloaded
from the web/ftp site using normal PC/Windows procedures. While
the next 3 screens below pertain to the MVP3010, similar screens will
appear for any MultiVOIP model described in this manual.
! #$
% & $()* &% +, -./
0) &$ $1
2% 1
11
3...
Page 352
Operation and Maintenance MultiVOIP User Guide 352 Generally, the firmware file will be a self-extracting compressed file (with .zip extension), which must be expanded (decompressed, or “unzipped”) on the user’s PC in a user-specified directory. $15 67 1 6
Page 353
MultiVOIP User Guide Operation and Maintenance 353 Implementing a Software Upgrade Beginning with the 4.03/6.03 software release, MultiVOIP software can be upgraded locally using a single command at the MultiVOIP Windows GUI, namely Upgrade Software. This command downloads firmware (including the H.323 stack), and factory default settings from the controller PC to the MultiVOIP unit. When using the MultiVOIP Windows GUI, firmware and factory default settings can also be transferred from controller PC...
Page 354
Operation and Maintenance MultiVOIP User Guide 354 Download Firmware transfers the firmware (including the H.323 protocol stack) in the PC’s MultiVOIP directory into the nonvolatile flash memory of the MultiVOIP. Download Factory Defaults sets all configuration parameters to the standard default values that are loaded at the MultiTech factory. Upgrade Software implements both the Download Firmware command and the Download Factory Defaults command. Downloading Firmware 1. The MultiVoip Configuration...
Page 355
![Page 355
MultiVOIP User Guide Operation and Maintenance
355
3. If a password has been established, the Password Verification screen
will appear.
Type in the password and click OK.
4. The MultiVOIP ___- Firmware screen appears saying
“MultiVOIP [model number] is up. Reboot to Download Firmware?”
Click OK to download the firmware.
The “Boot” LED on the MultiVOIP will light up and remain lit during
the file transfer process.](http://img.usermanuals.tech/thumb/3355/84011/w300_multitech-mvp-410-user-guide-r-c_d-354.png "Page 355
MultiVOIP User Guide Operation and Maintenance
355
3. If a password has been established, the Password Verification screen
will appear.
Type in the password and click OK.
4. The MultiVOIP ___- Firmware screen appears saying
“MultiVOIP [model number] is up. Reboot to Download Firmware?”
Click OK to download the firmware.
The “Boot” LED on the MultiVOIP will light up and remain lit during
the file transfer process.")
MultiVOIP User Guide Operation and Maintenance 355 3. If a password has been established, the Password Verification screen will appear. Type in the password and click OK. 4. The MultiVOIP ___- Firmware screen appears saying “MultiVOIP [model number] is up. Reboot to Download Firmware?” Click OK to download the firmware. The “Boot” LED on the MultiVOIP will light up and remain lit during the file transfer process.
Page 356
Operation and Maintenance MultiVOIP User Guide 356 5. The program will locate the firmware “.bin” file in the MultiVOIP directory. Highlight the correct (newest) “.bin” file and click Open. 6. Progress bars will appear at the bottom of the screen during the file transfer. The MultiVOIP’s “Boot” LED will turn off at the end of the transfer. 7. The Download Firmware procedure is complete.
Page 357
MultiVOIP User Guide Operation and Maintenance 357 Downloading CAS Protocol 1. The MultiVoip Configuration program must be off when invoking the Download CAS Protocol command. If it is on, the command will not work. 2. To invoke the Download H.323 PDL command, go to Start | Programs | MVP____ x.xx | Download H.323 PDL.
Page 358
![Page 358
Operation and Maintenance MultiVOIP User Guide
358
3. If a password has been established, the Password Verification screen
will appear.
Type in password and click OK.
4. The MultiVOIP ____- Firmware screen appears saying “MultiVOIP
[model number] is up. Reboot to Download Firmware?”
Click OK to download the CAS Protocol file(s) to the MultiVOIP.
The “Boot” LED on the MultiVOIP will light up and remain lit during
the file transfer process.](http://img.usermanuals.tech/thumb/3355/84011/w300_multitech-mvp-410-user-guide-r-c_d-357.png "Page 358
Operation and Maintenance MultiVOIP User Guide
358
3. If a password has been established, the Password Verification screen
will appear.
Type in password and click OK.
4. The MultiVOIP ____- Firmware screen appears saying “MultiVOIP
[model number] is up. Reboot to Download Firmware?”
Click OK to download the CAS Protocol file(s) to the MultiVOIP.
The “Boot” LED on the MultiVOIP will light up and remain lit during
the file transfer process.")
Operation and Maintenance MultiVOIP User Guide 358 3. If a password has been established, the Password Verification screen will appear. Type in password and click OK. 4. The MultiVOIP ____- Firmware screen appears saying “MultiVOIP [model number] is up. Reboot to Download Firmware?” Click OK to download the CAS Protocol file(s) to the MultiVOIP. The “Boot” LED on the MultiVOIP will light up and remain lit during the file transfer process.
Page 359
MultiVOIP User Guide Operation and Maintenance 359 5. The program will locate the CAS protocol file in the MultiVOIP directory. Highlight the correct (newest) file and click Open. 6. Progress bars will appear at the bottom of the screen during the file transfer. The MultiVOIP’s “Boot” LED will turn off at the end of the transfer. 7. The Download CAS Protocol procedure is complete.
Page 360
Operation and Maintenance MultiVOIP User Guide 360 Downloading Factory Defaults 1. The MultiVoip Configuration program must be off when invoking the Download Factory Defaults command. If it is on, the command will not work. 2.To invoke the Download Factory Defaults command, go to Start | Programs | MVP____ x.xx | Download Factory Defaults. 3. If a password has been established, the Password Verification screen will appear. Type in the password and click OK.