Mr.Bricolage Lawn Mower MBA11572 MBA11572H Instructions Manual

CARACTERISTIQUES TECHNIQUES39FR
706
1130750
1546760
1863
860
1100
Installation électrique .............................. 12 V
Batterie .................................................. 18 Ah
Pneus avant ....................................... 11 x 4-4
Pneus arrière ......................................15 x 6-6
Pression de gonflage avant ..................1,5 bar
Pression de gonflage arrière .. ............. 1,0 bar
Poids total ................................. 159 ÷ 168 kg
Diamètre interne du braquage...

Dear Customer,
We thank you for having purchased our riding mower and hope that it will fully meet all
your expectations.
This manual has been compiled in order that you may get to know your machine and
to be able to use it safely and efficiently. Don’t forget that the manual forms an integral
part of the machine so keep it handy so that it can be consulted at any \
time, and pass
it on to the purchaser if you resell the machine.
Your new machine has been designed and made in line with current...

1. SAFETY........................................................................\
.......................................... 3
Regulations for using the machine safely
2.  IDENTIFICATION OF THE MACHINE AND PARTS .............................................. 7
Explanations on how to identify the machine and its main parts
3. UNPACKING AND ASSEMBLY ........................................................................\
..... 9
Explanations on how to remove the packing and on how to assemble 
separated...

A) TRAINING
1) Read the instructions carefully. Be fami-
liar with the controls and the proper use of
the equipment. Learn how to stop the
engine quickly.
2) Only use the machine for the purpose for
which it was made, that is, the cutting and
collection of grass. Any use not specifically
indicated in the Operator’s Manual can be
dangerous and result in damage to the
machine, and will also result in the annulling
of the warranty and the manufacturer
declining all responsibility.
3) Never allow children or...

– insufficient wheel grip;
– being driven too fast;
– inadequate braking;
– the type of machine is unsuitable for itstask;
– lack of awareness of the effect of ground conditions, especially slopes;
8) The machine is equipped with a series of
safety microswitches and devices which
must never be removed, altered or tampe-
red with. Removing these devices invalida-
tes the warranty and the manufacturer
declines any responsibility. 
B) PREPARATION
1) While mowing, always wear substantial
footwear and long...

guard and/or grass-catcher in place.
9) Do not change the engine governor set-
tings or overspeed the engine.
10) Before leaving the operator’s position:
– disengage the blade;
– change into neutral (or mechanical
drive models) or make sure that the speed
change lever has returned to the neutral
position ( or hydrostatic drive models )
and engage the parking brake;
– stop the engine and remove the key.
11) Disengage the blade, stop the engine
and remove key:
– before carrying out any work beneath the...

SAFETY DECALS
Your machine must be used with care. Therefore, decals have been placed on the
machine, to remind you pictorially of the main precautions to take during use. These
decals are to be considered an integral part of the machine.
If a decal should fall off or become illegible, contact your retailer to replace it. Their
meaning is explained below.
SAFETY6EN
Warning:Read Operator’s
Manual before operating this
machine.
Warning: Disconnect the
ignition key and read the
instructions before carrying...

IDENTIFICATION OF THE MACHINE
The plate located under the driver’s seat has
the essential data and serial number of each
machine (6).
1.Acoustic power level according
to directive 2000/14/CE
2. Conformity mark according
to directive 98/37/EEC
3. Year of manufacture
4. Operating engine speed in r.p.m
(if indicated)
5. Type of machine
6. Serial number
7. Weight in kgs
8. Name and address of Manufacturer
9. Type of transmission (if indicated)
10. Article Code
IDENTIFICATION OF MAIN COMPONENTS
Various main...

14. Grass-catcher:as well as collecting the grass cuttings, this is also a safety ele-
ment in that it stops any objects drawn up by the blade from being thrown outside
of the machine.
15. Stone-guard or deflector: this can be fitted in place of the grass-catcher and
prevents objects drawn up by the blade from being thrown outside of the
machine.   
16. Engine: this moves the blade and drives the wheels. It is fully described in a s\
pe-
cific booklet.
17. Battery: provides the energy for starting the...