Mitel Sx 50 Dpabx Instructions Guide

Features Description 
l Refer to Section 9104-091-210-NA, Customer Data Entry, for 
- programming details. 
.:. 
)I 
Programming l Refer to Section 9104091-210-NA, Customer Data Entry. 
Operation To Enter Programming Mode at the Console: 
l Press the STATUS key once and hold -the LCD displays SX-50 plus 
the software identity and revision levels 
(e.g., MS54-MRO). 
l While holding down the STATUS key, dial the Security Code (default is 
7772 for System Security Code and 1234 for User Security Code). 
l...

Features 
Recall - 
Description 
The SX-50 system ensures calls that have been forvClarded or put on hold 
are not forgotten. After a programmed time-out period, a held call or a 
forwarded call not yet answered recalls the last party that handled it. 
A forwarded call not answered recalls the ‘extension or Attendant that 
forwarded it. On the Attendant Console, the flashing RECALL softkey 
identifies a recall. 
A forwarded Trunk call, unanswered or camped on and Manstiered, recalls 
the extension or...

Features Description 
l Set Timed Recall - No Answer (field d) to 1 - 7 (10 - 70 seconds). 
-Default is 3 (30 seconds). -/. 
..: 
i 
l Set Timed Recall - Call Hold (Extension) (field e) to 1 + 4 minutes. _ 
Default is 3 minutes. 
l Set Timed Recall - Call Hold (Attendant) (field 9 to 1 - 7 (10 - 70 
seconds). Default is 3 (30 seconds). _ 
Operation None. 
105 3-182 
“_ 
i 
I : 
:> 
Revision 0 9104-091-l 05-NA Issue 5  

Features 
Remote-Maintenance Administration And Test System (RMATS) 
Description 
RMATS provides the maintenance staff at a remote location with the 
ability to perform programming, Maintenance and Attendant Functions on 
the SX-50 system. The Attendant Console is not affected, thus the local 
attendant is not aware that the DPABX is being used by RMATS (unless 
the same facility that RMATS is currently using is used by the attendant), 
Conditions l Data Line Security is automatically enabled on RMATS...

Features Description 
Operation l Refer to Section 9104-091-301-NA, Remote Maintenance Adminis- 
- tration and Test System for a complete description. 
105 3-184 Revision 0 9104-091-l 05-NA Issue 5 
. . . 
; 
.’  

- 
Features 
Restrictive Station Control 
Description 
This feature temporarily restricts an extension from making outgoing trunk 
calls. Station-to-Station calls can be made in the normal manner, but an 
attempt to access a trunk results in the extension receiving reorder tone. 
Conditions l This feature works independently of the Room Status trunk barring 
feature. Restrictive Station Control does not change the room’s trunk 
barring status (ALLOW or DENY), or vice versa. Restrictive Station 
Control...

Features Description 
Reversal Meaning 
Description 
This entry in Trunk Programming defines the interpretation of Tip-Ring 
reversal. A reversal is received from the CO and indicates answer 
supervision. 
Conditions l In all cases, reversal implies supervision from the CO. 
Programming Commands 501 - 580, Trunks 01 --;, 80, Trunk Programming, Pegister 2: 
l If a reversal indicates an incoming call only, Reversal Meaning on Call 
Origination (field e) must be set to 1 (Incoming Call). Default is 0 (Not...

Features 
Ring Group 
Description 
This feature defines up to nine stations as a group. These stations are 
rung simultaneously when the group is accessed, hence the term Ring 
Group. The stations programmed into the Ring Group are called Ring 
Group members. There is only one Ring Group provided by the system 
and it is assigned a unique access code. 
Conditions l SUPERSET telephones cannot be members of a Rjng Group. 
l The Ring Group can be assigned as a Day or Night Inward Dial Trunk 
Intercept...

Features Description 
Operation l All members of the Ring Group are rung when the Ring Group Access 
- Code is dialed. Ringing is terminated when a member answers the 
call. 
105 3-188 
l If all members in the Ring Group are busy, the next caller camps on to 
the first member and hears ringback tone. Subsequent callers to the 
Ring Group receive busy tone (except for Direct-In Line, which routes 
directly to the Attendant Console). 
Revision 0 
9104-091-105-NA Issue 5  

Features 
Room Status 
Description 
The Room Status feature allows the Attendant Console (Reception) to 
view the current status of each Hotel/Motel room: 
- 
l Vacant or Occupied 
l Clean or Not Clean 
l Allowed or Denied trunk calls 
l Maid In Room or, 
l Out of Service 
The maid or staff enters codes from the room extension to indicate that the 
room is being prepared, is available for guests or is out of service. 
The front desk is responsible for: 
. 
setting the Room Status to OCCUPIED or VACANT...