Mitel Sx 50 Dpabx Instructions Guide

Features Description . 
l Press the Select softkey. 
l Press the Next softkey until the appropriate message is displayed. 
l Press the On softkey, to activate the displayed message. 
To De-activate a Pre-programmed Advisory Message: 
l Press the Superkey key, to select the programmable features menu. 
Feature title CALL FORWARDING appears on display. 
l Press the No softkey, to step forward to ADVISORY MSGS? feature. 
l Press the Yes softkey. 
. 
l Press the Select softkey. 
l Press the Next softkey...

Features 
Messaging - Call Me Back 
Description 
This feature allows a SUPERSET 3, SUPERSET 4, SUPERSET 410 or 
SUPERSET 420 telephone user to send a message to a busy or 
unanswered set, requesting that the called party respond to the message 
sender. The Message Waiting indication takes the.form of: 
l a flashing indicator next to the Message key on SUPERSET 470 and 
SUPERSET 420 telephones 
l a flashing MSG prompt on a SUPERSET 4 telephone 
l a flashing Message Waiting key on a SUPERSET 3 telephone 
l...

Features Description 
l Set Line Appearance Type (field c) to Message Waiting Key (line type 
- 9). When the Message Waiting Key is selected in field c, fields d + i 
cannot be programmed. 
Operation 
SUPERSET 
You can leave a message if the message indicator is lit during call set up. A 
slowly flashing indicator while the set is idle, indicates that a message is waiting. 
To leave a message at another extension: 
l Press the Message key when you receive busy tone or no answer. You 
can do this during...

Features 
The call is terminated and dial tone is returned. The called party’s set 
displays the flashing MSG prompt. 
To Receive a Call Me Back Message: 
The flashing MSG prompt in the top right of the LCD indicates a message is 
waiting. The set is idle. To read the message: 
. Press the MSG softkey. Thedisplay indicates the number of messages 
to be read. 
l Press the READ MSG softkey. The display shows the first message. 
If there are more messages, the NEXT softkey appears. Press it to read 
these...

Features Description 
105 3-154 
next sender in the message queue. The Message Waiting feature key 
-continues to flash until there are no more messages to be read. 
To Respond to the Next Message: 
l Press the flashing Message Waiting feature key or dial 65. The sender 
of the next message is dialed. Repeat until the Message Waiting 
feature key stops flashing and reorder tone is heard, indicating that the 
end of the message queue has been reached. 
To Cancel the Call Me Back Message: 
l If Message...

Features 
. If Message Waiting Automatic Cancel (Command 100, Register 12, 
field 
9 is disabled, dial the Cancel All Message Waiting Indications 
code (default is 66). 
. If the Attendant or an Auxiliary attendant send the message, the 
console can cancel the message. 
9104-091-105-NA Issue 5 Revision 0 105 3-155  

Features Description 
1 Meter Pulse Collection 
Description 
Conditions 
The following conditions apply to this feature: 
l The PABX can only detect and collect the types of meter pulses 
identified above. 
l The trunk must provide answer supervision. This is counted as the first 
meter pulse. 
l The system can record a maximum of 9998 pulses. 
l Pulses are always recorded regardless of what is happening to the 
trunk (hold, talking etc.). 
Programming Command 100, System Options, Register 14: 
Operation...

Features 
Microphone On/Off 
Description 
The MIC ON/OFF feature key on the SUPERSET 4 telephone and the 
microphone mute key on the SUPERSET turns off the microphone 
during Handsfree operation to prevent transmission of local sound, or to 
improve reception when the set is installed in a noisy environment. 
The Microphone on the SUPERSET 0 and SUPERSET telephones is 
turned on by the system software when a handsfree call is activated. 
Successive operation of the Microphone key toggles the,microphone...

Features Description 
Mixed Station Dialing 
Description 
This feature permits simultaneous use of rotary and DTMF telephones on 
ONS Lines. The SX-50 system provides five D.TMF receivers. All station 
features, except those requiring the user to dial * or #, are available to 
both types of telephones. 
Conditions None. 
Programming None. 
Operation None. 
105 3-158 Revision 0 9104-091-l 05NA Issue 5  

Features 
Multiple-Line Appearances (Key Line/Multicall Line) 
Description 
The SUPERSET 4 telephone can have up to fourteen appearances of 
key and/or Multicall Lines. The SUPERSET telephone can have up to 
two appearances of key and/or Multicall Lines. The SUPERSET 470 
telephone can have up to five appearances of key and/or Multicall Lines. 
The SUPERSET 420 telephone can have up to twelve appearances of 
key and/or Multicall Lines. 
Key Lines 
Key Lines are appearances of single line set lines,...