Mitel Sx 50 Dpabx Instructions Guide

Features Descriotion 
A SUPERSET 4 and SUPERSET 420 telephone receiving this type of 
forwarded call displays 
CFB: or CFNA:, as appropriate, preceding the 
caller’s name or extension number. 
Conditions l Call Forwarding has no effect on callbacks. 
l Call Forwarding has no effect on calls directed to an extension via 
hunting. 
l Only one type of Call Forwarding can be active at an extension at any 
time. If an extension has one type of Call Forwarding active and a new 
Call Forwarding type is entered,...

- 
Features Description 
Commands 121 - 129, COS 1 - COS 9 Programming, Register 4: 
Fields b through e of the above registers control Call Forwarding. 
l Follow Me is field b. 
l Busy is field c. 
l No Answer is field d. 
l Busy/No Answer is field e. 
The options for these fields are: 
l Disable all Call Forwarding (field = 0) _ 
l Enable internal Call Forwarding of extension calls and trunk calls (field 
= 1). This is the default. 
l Enable internal and external Call Forwarding of extension calls only...

Features Description 
To cancel Call Forwarding: 
l Lift the handset - wait for dial tone. 
l Dial any forwarding access code. 
l Hang up -the forwarding is canceled. 
SVPERSET 4 Telephone 
To Set Up or Modify Call Forwarding: 
l With the handset on-hook, press the PROGRAM softkey. 
l Press the CALL FWD softkey. . 
l The Features Display shows a Call Forwarding type. If the displayed 
type is required, press the YES softkey. If the displayed type is not 
required, press the NO softkey. Another Call...

Features Description 
Note: The Clear All Features code (default 444) also can be used to deactivate Call 
Forwarding. Refer to 
Clear All Features in this Section. 
To Reactivate Call Forwarding: 
l Press the SELECT FEATURES feature key. 
l Dial ‘1’ (feature number 1 is-Call Forwarding (1 :FWD)). 
l Press the ON softkey. 
SUPERSET 420 Telephone 
To Set Up Call Forwarding: _ 
. 
. 
. Press the Superkey key, to select the programmable features menu. 
Press the No softkey, to step forward to the CALL...

Features Description 
l Press the Yes softkey, to select call forwarding feature. The display 
-indicates the existing call forwarding option. 
l Press the Change softkey. 
‘5 
.l 
_’ 
.>” 
l Press the Off softkey. 
To Reactivate Call Forwarding: 
l Press the Superkey key, to select the programmable features menu. 
l Press the No softkey, to step forward to the CALL FORWARDING 
feature. 
l Press the Yes softkey, to select call forwarding feature. The display 
indicates the existing call forwarding...

Features Description 
Call Hold (Attendant) 
Description 
This feature places a call on hold at one of three HOLD keys. This frees 
the DIAL0 or LDN softkeys where the call originally appeared. The Atten- 
dant can retrieve the call by pressing the appropriate HOLD key. An 
extension can pick up the call by dialing the correct Call Hold Access 
Code. 
Conditions l If Music on Hold is required (trunk calls only), a Music-on-Hold Mod- 
ule must be installed on the Universal Card. A Music-on-Hold module 
is...

Features Description 
Auxiliary Attendant 
105 3-56 
To place a call on Hold: 
l Press the appropriate HOLD function key (Hold 1, Hold 2 or Hold 3). 
While the key is held down, the display shows the corresponding Call 
Park access code. 
. . 
‘ 
.‘I 
., 
_,’ 
l The associated line indicator shows a dark square. If the call recalls to 
the set, the line indicator flashes. 
To retrieve a call from Hold: 
l Press the appropriate HOLD function key. The associated-line’ 
indicator clears: 
Revision 
0...

Features Description 
Call Hold (Extensions) 
Description 
This feature enables the extension user to place the current call on hold by 
dialing a code. The user can hang up. or make other calls. All features nor- 
mally active on the extension can be selected while the call is held. The held 
call can be retrieved locally or remotely (from a different extension) by dialing 
the required Call Hold Retrieve Access Code. The retrieved call can be 
transferred or added to form a conference. If the held call...

Features Description 
Commands 121 - 129, COS 1 + COS 9 Programming, Register 3: 
l Call Hold (field e) for the holding extension must be set to 1 (Enable). 
Default is 1. 
Operation To Place a Call on Hold: 
l Originate or answer a call. 
l Flash the switchhook. 
l Dial the Call Hold Access Code (default is 51). Dial tone is returned. 
The original call is held. The holding extension can make or receive 
calls or access features in the normal manner. 
To Retrieve a Held Call Locally (From the Holding...

Features Description 
Call Pickup 
Description 
This feature enables an extension user to answer a call ringing at another 
extension. 
There are three types of Call Pickup: Local,.Directed and Attendant. Local 
means to pick up a call within the same Pickup Group. There can be up to 
seven Pickup Groups. Directed Pickup applies to any extension within the 
system. Attendant Call Pickup allows an attendant to dial a code or press a 
preprogrammed console key to answer any ringjng extension. Attendant...