Mitel SX 200 ML PABX Instructions Guide

Features 
l Page the desired party, specifying the Subattendant Hold Pickup 
access code and the subattendant Identifier, followed by the hold 
position number. 
When the paged party dials the Subattendant Hold Pickup access code 
number, the paged and held parties are connected. 
Note: If the paged party does not call, the held party recalls the subattendant automati- 
cally after the hold recall timeout: see Subattendant - Ho/d fositions in this 
document. 
Subattendant - Recall 
Description The recall...

Features Description 
l There is a maximum of one RECALL key per subattendant position. 
l Also see CorMio~s under f?eca//. 
Programming 
To program a Recall key, enter the Expand Set Subform of Form 09 
(Station/SU/?!ZRS,VTelephones) or Form 45 (Key System Telephones), 
and: 
Operation 
l Program a RECALL key via the RECALL softkey. 
Also see Programming, under Reca// in this document. 
When a call recalls to the subattendant position, press the RECALL key, 
go off-hook, or press the SPEAKER ON/OFF key...

Features 
To cancel Do Not Disturb on an extension: 
l Press SUPERKEY. 
l Press the STATIONS softkey. 
l Enter extension number. 
l Press the DO NOT DISTURB softkey. 
l Press SUPERKEY to exit. 
- In the top right hand portion of the display, the DND indication 
changes to the current state of the extension. 
SUPERSET 401+ Telephone 
Description The SUPERSET 401+ telephone is a single-line digital telephone that 
employs DNIC line transmission technology. It provides a Flash key, a 
Message key with...

Features Description 
Conditions None. 
Programming Refer to the Customer Data Entry Practice; program SUPERSET 47U 
telephones in CDE Form 09 (Station/SUPE/?SETTeiephones); select their 
COS Options in CDE Form 03 (COS Define). 
Operation 
Refer to the specific feature. 
SUPERSE~420 Telephone 
Description The SUPERSET420telephone isa multi-line digital telephone that employs 
DNIC line transmission technology. The SUPE/$?ET420telephone has 12 
programmable keys with associated LCD indicators. These keys...

Features 
that appear in the display. The set also provides a Message key and 
Microphone key with indicator lamps, and five fixed function keys without 
indicator lamps. 
You can use up to three Programmable Key Modules (PKMs) with this set. 
The PKMs are daisy-chained together and connect to a /VWfV~port on the 
base of the set. You can also connect one WL/IWData Module to this set. 
Refer to the f eH@tera/s Devices Practjce. 
Conditions 
None. 
Programming Refer to the Customer &I& EIJ~IY Practice;...

Features Description 
Programming None. 
 
.I 
Operation 
None. 
Swap (Trade Calls) 
Description This feature permits a SU/?E/?SE~telephone userto alternate conversation 
between two calls. Call Swap places one call on hold while conversation 
continues with the other call. This feature is similar to the Broker’s Call 
feature available on industry-standard telephones. 
Conditions The following conditions apply to this feature: 
l Swap operates only on SU/?I3SE~telephones. 
l There must be a party in...

Features 
l Press the SPLIT softkey to break up the three party conference. The 
party in conversation is held, the held party is connected to the set. 
l Press the TRADE CALLS softkey repeatedly to alternately place one 
call on hold and connect to the other call. 
Swap Campon 
Description This feature allows the user of a telephone to place the current call on hold 
and converse with a camped-on party. The telephone user can alternate 
between the two calls as required, form a 3-party conference, or...

Features Description 
Programming For industry-standard telephones enable COS Option 205 (flash for waiting 
call) and enable System Option 38 (switch-hook flash). 
For feature key activation of Swap from a SUPERSET 410 telephone, 
program a SWAP/TRADE CALLS feature key 
(see Feature Keys). 
Operation Industry-standard and SUPERSET 407+ Telephones: 
A call is in progress at the extension; a second caller camps on; 
l Flash the switch-hook or press the FLASH key (SUPERSET 401+ 
telephones). The current...

Features 
l To return to the original conversation, press the TRADE CALLS softkey, 
or, 
l To form a conference, press the CONFERENCE softkey. To exit from 
the conference call, while leaving the two other parties connected, press 
the RELEASE ME softkey, 
Svstem Identifier 
Description A unique I- to 3-digit identifier may be assigned to the system. it appears 
on traffic measurement and SMDR reports to identify the system when 
central polling equipment is used for traffic measurement, trunk SMDR,...

Features Description 
Tenanting 
Description 
Economy of scale makes sharing PABX services practical. Using the 
tenanting features, up to 25 small businesses, or departments of a larger 
business, can share the services of a SX-200 PABX. Logically, the PABX 
is divided into 25 separate PABXs, each providing its tenant with 
customized features and services. 
Consoles, night bells, CO trunks, and dial-in trunks can either be shared 
between tenants or allocated individually to each tenant. Switching to...