Mitel SX 200 ML PABX Instructions Guide

General Description 
IMPORTANT SAFETY INSTRUCTIONS 
WARNING: Failure to follow all instructions may result in improper equipment opera- 
tion and/or the risk of electric shock. 
. This product is to be installed and serviced only by qualified personnel. 
. Read all instructions before attempting to install or use this product. 
l Install all assemblies using the procedures described in this Practice. 
l Configure this product with only the assemblies specified in this Practice. 
l Grounding circuit...

General Description 
Danger indicates an imminently hazardous situation which, if not 
avoided, will result in death or serious injury. 
-Y 
 
Warning indicates a potentially hazardous situation which, if not 
avoided, could result in death or serious injury. 
Caution indicates a potentially hazardous situation which, if not 
avoided, may result in minor or moderate injury and/or damage to 
the equipment or property. 
: . . 
: 
Issue 1 Revision 0 March 1997  

1. 
2. 
3. 
4. 
5. 
Table of Contents 
Introduction 
.................................................... ..1- 1 
General 
.......................................................... ..l- 1 
Reasonforlssue 
................................................... ..l- 1 
Disclaimer 
........................................................ ..I- 1 
System Overview.................................................2- 1 
General 
.......................................................... ..2- 1 
Physical Description...

General Description 
List of Figures 
Figure 2-l SX-200 ML Cabinet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-2 
List of Tables 
Table 2-l 
Physical Characteristics ..................................... .2-2 
Table 2-2 Environmental Requirements ................................. .2-3 
Table 2-3 Electrical Requirements ...................................... .2-3 
vi Issue 1 Revision 0 March 1997  

1 Introduction 
General 
This practice provides an overview of hardware features, as well as a summary of 
environmental, electrical, and maintenance considerations for the SX-200@ ML PABX. 
Refer to the following sections for more detailed descriptions of related information: 
l Features Description Practice 
l Engineering information Practice 
l installation information Practice 
Reason for Issue 
This issue describes the SX-200 ML LIGHTWARETM 16 software variant. 
Disclaimer 
The following products...

General Description 
l-2 Issue 1 Revision 0 March 1997  

2 System Overview 
General 
The SX-200 ML PABX is a microprocessor-controlled telephone system that handles 
both voice and data switching. The system hardware is electrically compatible with 
most: 
9 single line telephones, 
l MITEL@proprietary sets, 
l key telephone systems, 
l PABX telephone systems, and 
l central office exchanges. 
The following subsections outline the hardware configuration and the software version. 
Refer to Section 3 of this practice for additional information about the system...

General Description 
FRONT PANEL 4 / 
FRONT VIEW 
- _ 
(PANEL REMOVED) 
k 
POWER SUPPLY 
PERIPHERAL 
1 
INTERFACE 
CARD 
1 BAY CONTROL 
CARD 
1 MAIN CONTROL1 
t 
TI ADAPTER 
ASSEMBLY 
25-PAIR AMPHENOL 
CONNECTOR 
GROUND 
I 
PORT FOR SYSTEM 
FAIL TRANSFER UNIT 
CC0560 
Figure 2-I SX-200 ML Cabinet 
2-2 issue 1 Revision 0 March 1997  

System Overview 
Physical Characteristics 
Table 2-1 Physical Characteristics 
Cabinet Height 48.0 cm 
Cabinet Width 22.9 cm 
Cabinet Depth 42.0 cm 
Cabinet Weight (cards installed) 19 kg 19.0 inches 
9.0 inches 
16.5 inches 
42 pounds 
System Requirements 
Environmental and electrical requirements for the PABX are shown in Table 2-2 and 
Table 2-3 respectively. 
Table 2-2 Environmental Requirements 
Operating Temperature 
0 to 4o” c 32 to 104’ F 
Storage Temperature 
-20 to 5o” c -4 to 122’ F 
Relative...

General Description 
9 Hotel/Motel 
. Property Management System 
l Automated Attendant, and 
. Automatic Call Distribution. 
Voice Capabilities 
The SX-200 ML PABX interfaces to analog and digital peripheral devices using stan- 
dard twisted-pair office wiring. Peripheral devices include, but are not limited to, the 
following: 
Standard Telephones: Industry-standard rotary dial and DTMF telephones are sup- 
ported; ONS and OPS lines provide an interface for these sets. 
SUPERSET 401+‘~ Telephone: The...